3d printing of alginate/gelatin scaffold reinforced by nanofibers with hydroxyapatite coating for bone tissue engineering - صفحه:0-0

    a comparative review of the performance of different nanopolymers in improving the properties of drilling fluids - صفحه:0-0

    a comparative study on adhesion properties of polyurethane hot-melt adhesives, including c5 and c9 hydrocarbon tackifiers - صفحه:0-0

    a novel approach for synthesis of zwitterionic polyurethane coatings through molecular dynamics simulation study - صفحه:0-0

    a novel epoxy/mxene nanocomposite adhesive in aluminum-aluminum bonded joints:mechanical properties and lap shear strength - صفحه:0-0

    a promising success in the full regeneration of critical-size bone defects - صفحه:0-0

    a study on accelerated drug release from in-situ forming implants and the correlation with real-time profiles - صفحه:0-0

    a study on rheological behavior of pp/pe copolymers based on generalized maxwell model - صفحه:0-0

    accelerated wound healing through a poly-vinyl alcohol/chitosan/honey/clay nanocomposite hydrogel wound dressing - صفحه:0-0

    accelerated wound healing through a poly-vinyl alcohol/chitosan/honey/clay nanocomposite hydrogel wound dressing - صفحه:0-0

    accelerated wound healing through a poly-vinyl alcohol/chitosan/honey/clay nanocomposite hydrogel wound dressing - صفحه:0-0

    acidichromic behavior of n,n-dihydroxyethyl azobenzene doped in poly(methyl methacrylate) - صفحه:0-0

    adhesion properties of a polyurethane-acrylic hybrid adhesive synthesized through modification of polyol with a silane coupling agent - صفحه:0-0

    advances of sars-cov-2 vaccine delivery using supramolecular structuring of mesoporous silica nanoparticles modified with β-cyclodextrins - صفحه:0-0

    alginate/citric acid-sawdust/fe3o4 bio-adsorbent for malachite green removal from aquatic solutions - صفحه:0-0

    amino functionalized zno nanoparticles were incorporated to a polycarbonate/polyvinyl alcohol thin film membrane to improve water treatment - صفحه:0-0

    an assessment on morphological and thermal properties of the poly (lactic acid)/poly (butylene adipate-co-terephthalate) films with chain extender - صفحه:0-0

    an environmentally friendly adsorbent aerogel with outstanding mechanical performance - صفحه:0-0

    an investigation of the effect of fiber surface treatment on the flexural properties of 3d printed composites - صفحه:0-0

    an investigation on mechanical and rheological properties of recycled pet (r-pet) by using toluene diisocyanate (tdi) as a chain extender - صفحه:0-0

    analyzing the role of interface in creep resistance of natural rubber-silica composites - صفحه:0-0

    analyzing the swelling behavior of persian gum-g-polyvinyl acetate film using ternary interaction parameter - صفحه:0-0

    antibacterial nanobiocomposite hydrogels based on polyphenolic nanosheets decorated with ionic liquid for tissue engineering - صفحه:0-0

    aplying k-means clustring technique on physical and mechanical properties of various pmma/silica bone cements - صفحه:0-0

    application of genetic algorithm to model and interpret mechanical properties in thermoplastic starch-based biocomposites reinforced by rice straw - صفحه:0-0

    application of pnani/mwcnt/cu nanofibrous electrode in detection of nitrate ions - صفحه:0-0

    aqueous electrospinning of carboxymethyl chitosan sulfate/polyethylene oxide nanofibers - صفحه:0-0

    assessing printability map of pla solution in immersion precipitation 3d printing (ip3dp) - صفحه:0-0

    barrier properties of pla/pbat/nanoclay bionanocomposite films for food packaging - صفحه:0-0

    beaded superabsorbent hydrogels based on starch-g-poly (acrylic acid) assisted by cellulose nanofibers for cu2+ ions removal - صفحه:0-0

    beaded superabsorbent hydrogels based on starch_g_poly(acrylic acid) assisted by cellulose nanofibers for cu ions removal - صفحه:0-0

    bending behavior of glass/ epoxy multilayer sandwich composites reinforced with weft-knitted spacer fabrics - صفحه:0-0

    biodegradable pbat/evoh/zinc oxide nano composites - صفحه:0-0

    biodegradable polymeric micelles for biomedical applications - صفحه:0-0

    biodegradable thermoplastic vulcanizate nanocomposite with thermoresponsive shape memory behavior based on pla/nbr/cnc - صفحه:0-0

    calendering process of bio-based kenaf/low density polyethylene composites sheets - صفحه:0-0

    cellulose-based polymer electrolytes for electrochemical devices - صفحه:0-0

    cellulose-based recyclable polymer electrolytes - صفحه:0-0

    chamomile extracted polyphenol based nanoparticles made by oxidative coupling assembly - صفحه:0-0

    characterization of conventional grade polyisobutene for viscosity improver applications - صفحه:0-0

    chemical and mechanical assessment of peroxide cured epdm for fuel cell gasket application - صفحه:0-0

    chemical degradation of pipe grade polyethylene in the chlorinated water-effect of comonomer type and distribution - صفحه:0-0

    chemo-phototherapy of breast cancer cells by dopamine nanoparticles embeded in alginate hydrogels - صفحه:0-0

    chemorheological characterization of htpb based polyurethane formulations containing different chain extender contents - صفحه:0-0

    chitosan-based microneedle patches containing insulin-cyclodextrin for sustained transdermal delivery - صفحه:0-0

    click for bioprinting: development of autonomous curable bioinks based on diels-alder click chemistry - صفحه:0-0

    co2 adsorption of pet fabric coated with graphene oxide - صفحه:0-0

    comparison of hdpe films from basel and mitsui slurry plants - صفحه:0-0

    comparison the effect of ops vs. mwcnt on mechanical and ablation behavior of epdm nanocomposites - صفحه:0-0

    compatibility study and mechanical properties of nitrile rubber/ethylene- propylene-diene rubber blends - صفحه:0-0

    compatibilized pe/pp blends for the property enhancement of pe/pp waste - صفحه:0-0

    conduction mechanism and dielectric properties of pp/eva/mwcnts nanocomposites in the presence of pp-g-ma comatiblizer - صفحه:0-0

    conductive nanocomposite hybrid and biopolymer in presence of metal oxide particles for sensor applications - صفحه:0-0

    conductive polyacrylamide aerogel - صفحه:0-0

    control of hydrogen response for polypropylene obtained by ziegler-natta catalyst: effect of external donor - صفحه:0-0

    correlation between morphology and mechanical properties in low density polyethylene/ethylene vinyl acetate copolymer blends - صفحه:0-0

    covalent triazine-based framework as a ph-dependent sustained-release nanocarrier for anticancer drug - صفحه:0-0

    crystallization and micro-phase separation of thermoplastic polyurethane/polyaniline blends: influence of polyaniline nanorods content - صفحه:0-0

    crystallization temperature of diluted polymers: dependency on cooling rate and composition - صفحه:0-0

    curing characteristics and mechanical properties of (styrene butadiene rubber /ethylene propylene diene monomer)blend in the presence of a hybride of carbon black and nanocalay - صفحه:0-0

    curing haracteristics and mechanical properties of nr/cr/sbs blends - صفحه:0-0

    density and thermal conductivity study of rigid polyurethane foams using rsm - صفحه:0-0

    design and characterization of electrospun pvdf nanofibers containing graphene oxide/metal-organic framework composites for potential piezoelectric applications - صفحه:0-0

    designing a polyurethane based on ppg and mdi capable to participate in free radical polymerization - صفحه:0-0

    determining the pka value of the fourth generation poly(propylene imine) dendrimer functionalized with 4-carboxyphenylboronic acid by ph titration method - صفحه:0-0

    development of a novel duple acrylic coating with an anti-fungal effect for bio applications - صفحه:0-0

    development of a two-part acrylic adhesive with high thermal resistance - صفحه:0-0

    development of ph sensing light-responsive polymer nanoparticles - صفحه:0-0

    diluent elimination may impact the crystalline structure of the polymer in a polymer-diluent system - صفحه:0-0

    dye rejection by nanofiltration membrane based on polysulfone and bohemite particles modified with lysine - صفحه:0-0

    eco-friendly uv-cured amps doped polyaniline-urethane methacrylate coating as a corrosion protection coating - صفحه:0-0

    effect of alcohol content of support on the catalytic performance of ziegler-natta catalysts in propylene polymerization - صفحه:0-0

    effect of alkyl chain length in phthalate plasticizer via rheological investigation of pvc plastisol gelation and fusion - صفحه:0-0

    effect of alumina nanoparticles on of the fracture behaviour of epoxy nanocomposites - صفحه:0-0

    effect of castor oil content on viscosity of castor tdi prepolymers - صفحه:0-0

    effect of core material on the mechanical properties of hybrid cfrp sandwich composites - صفحه:0-0

    effect of elastomer type on spherulitic structure and deformation behavior of isotactic polypropylene - صفحه:0-0

    effect of go-zno nanohybrid on biodegradability and mechanical properties of polybutylene succinate - صفحه:0-0

    effect of graphite oxide on hydrophobicity of epoxy resin coatings - صفحه:0-0

    effect of graphite oxide on the shape stabilization of polyethylen glycol phase change materials systems - صفحه:0-0

    effect of hydrophobic monomer type on the rheological properties of the hydrophobically modified polyacrylamides synthesized via micellar polymerization - صفحه:0-0

    effect of initial silica content on the phase composition, morphology, and thermal oxidation kinetic of novolac-based carbon aerogel composites - صفحه:0-0

    effect of modified carbon fiber on shape stability and leakage reduction of phase change systems based on polyethyene glycol - صفحه:0-0

    effect of modified graphene oxide nano-plate on mechanical properties of gelma nanocomposite in tissue engineering - صفحه:0-0

    effect of molecular weight on the performance of asymmetric polysulfone membranes - صفحه:0-0

    effect of nano-clay incorporation on the mechanical properties of nanocomposite ipns based on gelma/alginate/nano-clay - صفحه:0-0

    effect of nanoparticles concentration on electrical conductivity of a tpu/mwcnt nanocomposite - صفحه:0-0

    effect of oxidant concentration on intrinsic viscosity and swelling behavior of a chemically modified persain gum (pg) in water - صفحه:0-0

    effect of pla on tensile properties of soft pvc - صفحه:0-0

    effect of polymerization techniques and reaction temperature on glass transition temperature (tg) of poly(methyl methacrylate) (pmma) - صفحه:0-0

    effect of reduced graphene oxide on cure kinetics of polydimethylsiloxane - صفحه:0-0

    effect of secondary to primary accelerator ratio on curing, mechanical and ablation behavior of elastomeric composite based on epdm - صفحه:0-0

    effect of silanized polyurethane content on adhesion properties of a polyurethane-acrylic hybrid adhesive - صفحه:0-0

    effect of soybean oil on dynamic mechanical properties of epoxy/polyurethane ipns - صفحه:0-0

    effect of sulfonation degree and thermal treatment on the stability and proton conductivtiy of blend membranes of highly sulfonated polysulfone/fully fluorinated poly(aryl ether) for fuel cell application - صفحه:0-0

    effect of temperature on diffusion coefficient and nematic-isotropic phase transition in liquid crystalline elastomers using molecular dynamics simulation - صفحه:0-0

    effect of the organic additive on the polyvinyl chloride nanocomposite properties - صفحه:0-0

    effect of the percentage of sulfonation monomer in hydrophilicity of sulfonated poly (arylene ether sulfone) water treatment membranes - صفحه:0-0

    effect of the structure of activated carbon on the absorption property - صفحه:0-0

    effect of various catalyst supports in catalytic activity for poly-alpha-olefin hydrogenation - صفحه:0-0

    effect of various catalyst supports in catalytic activity for poly-alpha-olefin hydrogenation - صفحه:0-0

    effect of water infiltration rate on mechanical properties of heat-treated crumb rubber containing cementitious mortar - صفحه:0-0

    effects of lauroyl peroxide on structural modification and physical properties of polylactic acid - صفحه:0-0

    effects of polarity and functionality on optical properties of fluorescent polymer nanocarriers - صفحه:0-0

    effects of recycled nanosilica on the cure properties and wear resistance of the green tire - صفحه:0-0

    efficacy of biocompatible polymers polyethylene glycol and chitosan in surface modification of carbon nanotubes for medical application - صفحه:0-0

    elastomeric nanocomposite based on sr/ iir/ silica nanoparticles(sinp): design, preparation and characterization - صفحه:0-0

    electrospinning of polyhydroxybutyrate/lignin/cellulose-nanofibers bio-nanocomposite scaffold for bone tissue engineering application - صفحه:0-0

    electrospun polyurethane (pu) nanofibers for vascular graft application - صفحه:0-0

    emulsion copolymerization of acrylic monomers to prepare pressure sensitives adhesive (psa): effect of triethylamine (tea) as an adhesion promoter on mechanical properties - صفحه:0-0

    enhanced co2 capture on nitrogen-doped porous carbon materials derived from phenolic resins based on deep eutectic solvent precursor - صفحه:0-0

    enhancement of the pvdf’s piezoelectricity by magnetic-conductive hybrid nanoparticle-nanoplates - صفحه:0-0

    environmental aspects of using seawater-based polymer systems in improving water-based drilling fluids properties - صفحه:0-0

    epoxidized natural rubber as a compatibilizer in chlorosulfonated pe/organoclay nanocomposites - صفحه:0-0

    epoxy/amine dual-curable system prepregs: changes of viscosity by different cure systems and cure cycles - صفحه:0-0

    ethylene-propylene copolymerization using et(ind)2zrcl2 metallocene catalyst: synthesis and microstructure analysis - صفحه:0-0

    eva noanocomposite foams containing mwcnt as electromagnetic wave absorbent. - صفحه:0-0

    evaluation of chemical functionalization of polylactic acid as a spacer for surface immobilization of biomacromolecules - صفحه:0-0

    evaluation of electrolyte role on the surface properties of synthetic fiber by a chemical process - صفحه:0-0

    evaluation of peel strength of a polyurethane/acrylic pressure-sensitive adhesive - صفحه:0-0

    evaluation of surface energy for cpp film using the lifshitz-van der waals/ acide-base method - صفحه:0-0

    evaluation of the toluene progen effect on porous polymer emulsion poly (styrene-divinylbenzene) - صفحه:0-0

    evaluation the influence of polyether/polyester mixed soft segments on hydrogen bonding and micro-phase separation of thermoplastic polyurethanes - صفحه:0-0

    evaluation the rheological behavior of high filled cu-abs 3d printing filament - صفحه:0-0

    experimental investigation on morphological characteristics and stability of poly(vinyl chloride) microspheres by microsuspension polymerization - صفحه:0-0

    extraction of cellulose nanofibers from paper pulp using mechanical-chemical method - صفحه:0-0

    fabrication and characterization of 3d bio-printed electroconductive hydrogel scaffold based on alginate and its application in cardiac tissue engineering - صفحه:0-0

    fabrication and characterization of high modulus composites as end plate for polymer electrolyte membrane fuel cell application - صفحه:0-0

    fabrication and characterization of high modulus composites as end plate for polymer electrolyte membrane fuel cell application - صفحه:0-0

    fabrication and characterization of l-asparagine monohydrate functionalized-tio2/pes nanofiltration membrane with enhanced antifouling properties in removal of dye pollution from water - صفحه:0-0

    fabrication and characterization of polyvinylidene fluoride nanofiltration membrane for wastewater treatment - صفحه:0-0

    fabrication and modification of pvdf mixed matrix ultrafiltration membranes by peg and pvp hydrophilic polymers - صفحه:0-0

    fabrication of a novel polyol from sunflower oil for synthesis of antibacterial polyurethane coating - صفحه:0-0

    fabrication of a self-healing antibacterial hydrogel using β-cyclodextrin dimer/modified alginate/agno3 - صفحه:0-0

    fabrication of alginate-carboxymethyl cellulose blend beads via titanium(iv) oxide/covalent organic frameworks hybrids under ultrasonic irradiation - صفحه:0-0

    fabrication of drug-carrying nanocomposites from polylactic acid, polyethylene glycol and hydroxyapatite - صفحه:0-0

    fabrication of electrospun polyvinylalcohol nanofiber containing ferula assa-foetida gum extract and investigating its antibacterial properties - صفحه:0-0

    fabrication of gelatin/ poly (vinyl alcohol)/ carboxymethyl cellulose composite nanofibrous sponge for hemostatic application - صفحه:0-0

    fabrication of nanofibrous piezoactive bioscaffold based on pvdf-go/plla nanocomposite by hybrid electrospinning method - صفحه:0-0

    fabrication of phosphazene based covalent triazine polymer with excellent flame retardancy and smoke suppression for thermoplastic polyurethane - صفحه:0-0

    fabrication of plga microcarriers with oxygen release capability for bone tissue engineering - صفحه:0-0

    fabrication of self-healing hydrogels through inclusion complexation of vinyl modified macrocyclic monomers - صفحه:0-0

    fabrication of thin film nanocomposite based on pvb and swcnts as a transparent electrode in photovoltaic applications by spin coating - صفحه:0-0

    fabrication of zirconium oxide complex bridged by terephthalic ligands (uio66)-pvdf mixed matrix membrane for lithium ion battery separator - صفحه:0-0

    facile technique for gelma synthesis providing increased methacrylation degree - صفحه:0-0

    fe3o4 nanoparticles grafted on microcrystalline cellulose/immidazolium-based ionic liquid: efficient nanodemulsifire for separation of water in crude oil emulsion - صفحه:0-0

    flammability reduction of flexible polyurethane foams using go and ldh nanoparticles-based multilayer coatings - صفحه:0-0

    flexible cation exchange membrane based on modified k-carrageenan/pva double network hydrogel with high ionic conductivity - صفحه:0-0

    flexible cellulose/pegema based solid and gel polymer electrolytes - صفحه:0-0

    fluorescent polymer nanoparticles as high-security anti-counterfeiting ink - صفحه:0-0

    fluorescent polymer nanoparticles as ph sensor platforms - صفحه:0-0

    four different methods of acrylic acid grafting on pla nonwoven for further layer-by-layer modification - صفحه:0-0

    gel origin in the 7000f type hdpe films - صفحه:0-0

    gel polymer electrolyte based on synthsised organic-inorganic nanoparticles/pvdf - صفحه:0-0

    gelatin nanofibers incorporating zif-8 nanoparticles as wound dressings - صفحه:0-0

    gelatin/polycaprolactone composites as bioinspirated scaffolds for tissue engineering - صفحه:0-0

    geminal surfactants made by curcumin/bisimidazolium based ionic liquid - صفحه:0-0

    graft copolymerization of lignin-polycaprolactone(pcl) and evaluation of its structural characteristics - صفحه:0-0

    granular hydrogels composed of modified jammed microgels for 3d printing applications - صفحه:0-0

    graphene oxide/silicon rubber/pla as a conductive thermoplastic vulcanizates - صفحه:0-0

    green starch composite films reinforced bysecond-generation bioethanol production byproduct - صفحه:0-0

    green synthesis and characterization of micronization polylactide foam (lactirofoam) - صفحه:0-0

    green synthesis of titanium(iv) oxide with covalent organic frameworks hybrid under ultrasonic irradiation - صفحه:0-0

    halloysite and ionic liquid composites as catalysts for oligomerization and hydrogenation of polyalphaolefins - صفحه:0-0

    high-performance comb-like pce superplasticizer and their interactions with cement particles - صفحه:0-0

    how does modification of interface by a long chain silane alter gas transport in nbr/silica composites? - صفحه:0-0

    hybridization of graphene oxide with tragacanth gum to diminish its cytotoxicity effect - صفحه:0-0

    hydrophobicity achievement of polyurethane coating using nano-silica and teflon powders - صفحه:0-0

    hydroxyapetite / polysaccharides composite hydrogels as biocompatible nano-carriers for bone infection - صفحه:0-0

    immobilization of laccase nanoflower in polydopamine biofilm for biocathode formation and its integration with glucose dehydrogenase bioanode in a membrane-free of glucose/o2 biofuel cell - صفحه:0-0

    improvement of thermal properties of polypropylene and investigation of mechanical properties of cyclic copolymer/polypropylene blend - صفحه:0-0

    improving fire performance of thermoplastic polyurethane with an intumescent flame retardant system and nanomolybdenum disulfide - صفحه:0-0

    improving the anti-corrosion performance of hydroxyapatite-based coating in the presence of an organic modifier - صفحه:0-0

    in situ green synthesis of copper nanoparticles on nylon with safflower extract - صفحه:0-0

    influence of molecular microstructure of solution-polymerized styrene-butadiene rubber types on vulcanization kinetics - صفحه:0-0

    influence of molecular weight, molecular weight distribution, random and impact co-polymerization on the rheological behavior of polypropylene - صفحه:0-0

    influence of pmma bone cement composition on its mechanical properties - صفحه:0-0

    influence of speed print and raster angle on the mechanical properties of abs polymer parts produced by fused deposition modelling - صفحه:0-0

    interpenetrated network hydrogel based on gelma/ alginate and nano sio2 - صفحه:0-0

    interpenetrating polymer networks of poly(2-hydroxyethyl methacrylate) and poly(dimethyl siloxane) films for biomedical applications - صفحه:0-0

    introducing a nanocomposite transdermal patch: adhesion and ketoprofen release - صفحه:0-0

    investigating electrospinning conditions on the mechanical properties of polyamid (pa) fibers - صفحه:0-0

    investigating of nanofiber orientation on the ilss of epoxy resin/ glass fiber composite laminates. - صفحه:0-0

    investigating the effect of cu nanoparticles on the absorption of basic dyes on pan nanofibers - صفحه:0-0

    investigating the effect of extruder die temperature on rheology-morphology relationship in polypropylene/polyethylene terephthalate blend - صفحه:0-0

    investigating the effect of oscillatory shear strain on the dielectric properties of ps/tio2 nanocomposite - صفحه:0-0

    investigating the effect of silica nanoparticles modified by dendrimer on performance of polycarbonate thin film nanocomposite membranes in submerged membrane systems for waste water treatment - صفحه:0-0

    investigating the effect of surfactant concentration in the synthesis of polyurethane microcapsules containing isophorone diisocyanate healing agent - صفحه:0-0

    investigating the effects of non-clay on polymeric edible coating based on psyllium mucilage - صفحه:0-0

    investigating the electron-donating effect of aryl substituents in the catalytic behavior of α-diimine nickel (ii) catalyst on ethylene polymerization - صفحه:0-0

    investigating the electron-withdrawing effect of aryl substituents in the catalytic behavior of α-diimine nickel (ii) catalyst on ethylene polymerization - صفحه:0-0

    investigating the hydrophilic properties of polycaprolactone containing capparis spinosa extract for use in tissue engineering applications - صفحه:0-0

    investigating the impact of bound rubber on cavitation resistance of silica-reinforced nbr composites - صفحه:0-0

    investigating the influence of uhmwpe fibers as a toughening agent for pmma in denture base - صفحه:0-0

    investigating the mechanical properties of hydrogel nanocomposite with lignin nanoparticles: a short review - صفحه:0-0

    investigating the progress of polymerization of bismaleimide using mark-houwink-sakurada equation - صفحه:0-0

    investigating the properties of teflon nanocoatings containing zinc nanoparticles on the steel surface - صفحه:0-0

    investigating the rheological and hydrophilic behavior of polyethylene glycol (monomethyl ether)-maleic anhydride - صفحه:0-0

    investigating the toughness and tensile strength of epoxy nanocomposites based-ionic modified sio2 nanoparticles. - صفحه:0-0

    investigation rate constant of isocyanate blocking reaction as coupling agent - صفحه:0-0

    investigation of aptms effect on the mechanical properties of waterborne polyurethanes based on castor oil - صفحه:0-0

    investigation of substitute extenders of titanium dioxide by barium sulfate and aluminum silicate in order to use in rezins coatings - صفحه:0-0

    investigation of acid and base treatment of halloysite on catalytic performance in poly-alpha-olefin hydrogenation reaction - صفحه:0-0

    investigation of conductivity, rheological and morphological properties of high density polyethelene filled with carbon black - صفحه:0-0

    investigation of effect of electrospinning parameters on morphology of polyvinyl alcohol nanofibers - صفحه:0-0

    investigation of effective parameters on cloud point of poly(acrylamide-co-acrylonitrile) in aqueous solutions - صفحه:0-0

    investigation of electrocatalytic properties of cu-ppda coordination polymer in co2 rr - صفحه:0-0

    investigation of polymerization temperature profile of pmma bone cement/nano-silica composite by infrared thermography - صفحه:0-0

    investigation of polyurethane-based elastomeric microcomposites reinforced with titanium dioxide (tio2) - صفحه:0-0

    investigation of rheological behavior of poly (lactic acid) (pla) /hcnt nanocomposites - صفحه:0-0

    investigation of rheological behaviors of pp and pp-pe copolymer - صفحه:0-0

    investigation of solvent system effect on alginate sulfate/polyvinyl alcohol electrospun nanofibers - صفحه:0-0

    investigation of the effect of chitosan on polyurethane bioadhesive based on castor oil - صفحه:0-0

    investigation of the effect of mixing time and speed on the glass transition temperature of tire tread filled with nanoparticles - صفحه:0-0

    investigation of the microstructure, mechanical properties, biodegradability of nanocomposites of pcl/go-zno - صفحه:0-0

    investigation of the strain sensing performance of pp/epdm/cnt nanocomposites - صفحه:0-0

    investigation of thermal behavior of bulk-aminolyzed pla with pamam - صفحه:0-0

    investigation of xylene permeability as pesticides and herbicides solvent in ‎cylindrical plastic bottles ‎ - صفحه:0-0

    investigation on mechanical properties of basil seed gum/ graphene oxide nanocomposite - صفحه:0-0

    investigation on permeability of packaging films based on polyethylene/ethylene vinyl alcohol/nanoclay nanocomposite - صفحه:0-0

    investigation the effect of different parameters on the size of polydimethylsiloxane particles using the microfluidic method - صفحه:0-0

    investigation the effect of polymer chain flexibility on kinetics of spiropyran photochromism in copolymer nanoparticles - صفحه:0-0

    investigation the effects of temperature & oxygen on the epoxy resin yellowing during synthesis - صفحه:0-0

    ionomer containing methacrylate double bond pendant groups: synthesis and characterization - صفحه:0-0

    kinetic study of butyl acrylate solution polymerization at high temperature - صفحه:0-0

    laboratory investigation of the effect of carbon nanotubes used in polyacrylamide preformed particle gels on conformance control of high water production wells - صفحه:0-0

    lldpe/cellulose microfiber/nanoclay nanocomposites based on insitu intercalated nanoclay - صفحه:0-0

    long-chain branched random poly (butylene adipate-co-ethylene terephthalate) tetrapolymers: synthesis and rheological properties - صفحه:0-0

    low density polyethylene based micro/nanocomposites: feasibility of calendering process - صفحه:0-0

    magnetic properties of the polyacrylonitrile nanofibers containing aluminum-doped iron oxide nanoparticles - صفحه:0-0

    manufacturing and characterizing of interpenetrating polymer network films based on carboxymetheyl cellulose and tetraethylorthosilicate - صفحه:0-0

    mechanical and electroconductive properties of glass fiber reinforced polyethylene filled with graphite - صفحه:0-0

    mechanical and rheological properties of poly lactic acid (pla) and poly butylene succinate (pbs) nanocomposites incorporating cellulose nanocrystals - صفحه:0-0

    mechanical improvement of glass fiber/pa66 composite using surfacemodified glass fiber and sebs-g-ma as an impact modifier - صفحه:0-0

    melt processing of acrylonitrile-butadiene-styrene (abs) on liquid deposition modeling (ldm) 3d printing and injection molding: process feasibility - صفحه:0-0

    mimicked tri-layer scaffold for chemo-photothermal therapy of breast cancer cells - صفحه:0-0

    mimicking mechanical behavior of human tissue with 3d printable elastomeric hydrogel - صفحه:0-0

    modeling and temperature control of isocyanate-water side reactions - صفحه:0-0

    modeling of critical properties in bionanocomposite hydrogels prepared by freeze-thaw method - صفحه:0-0

    modification and evaluation of polylactic acid (pla) for improved its hemocompatibility and hydrophilicity - صفحه:0-0

    modification of cellulose paper with photoluminescent acrylic copolymer nanoparticles containing fluorescein as ph-sensitive indicator - صفحه:0-0

    modification of pencil graphite electrode by sulfounated polyaniline fordetermination of dopamine - صفحه:0-0

    modification of polypropylene-graft-maleic anhydride with epoxy by reactive extrusion for preparation of high-melt-strength polypropylene - صفحه:0-0

    modified horie model to better describe the wholly curing of fully vulcanized elastomeric nanoparticles/epoxy nanocomposites - صفحه:0-0

    molecular and morphological studies to understand the strain hardening behavior of uhmwpe/hdpe blends - صفحه:0-0

    molecular weight and dispersity competition to govern the crystalline features of poly(3-hexylthiophene) - صفحه:0-0

    monitoring the curing process of bismaleimide / epoxy blend by ft-ir spectroscopy - صفحه:0-0

    monitoring the effect of initiator, stabilizer, and water/alcohol medium on the conversion of synthesized polystyrene by dispersion polymerization method by design expert software - صفحه:0-0

    mono-size polyisocynate nanoparticles as the interfacial crosslinker of wpu/acrylic core-shell latexes to adhesively bond laminates - صفحه:0-0

    morphological and mechanical properties of pla/pbat/nanoclay bionanocomposite films for food packaging - صفحه:0-0

    morphological and rheological investigation of pp/pc/sbs/clay nanocomposites - صفحه:0-0

    morphology, mechanical properties and melt rheology of pla/eva blend reinforced with silicon carbide (sic) nanoparticles - صفحه:0-0

    multi-functional core–shell nanofibrous scaffolds for accelerating wound healing - صفحه:0-0

    multiscale modeling approach to predict the mechanical behavior of elastomer nanocomposites - صفحه:0-0

    nano porous polymer beads based on cross-linked poly(styrene -co-butylacrylate) prepared through suspension polymerization for extraction of anthocyanin - صفحه:0-0

    nanoclay/kenaf/polyester hybrid composites: synergistic effects on energy absorbance - صفحه:0-0

    new protocol for modeling of thermal degradation kinetics of epoxy nanocomposites - صفحه:0-0

    novel alcl3 /ionic-liquid initiator system for the polymerization of isobutylene to conventional grade pib - صفحه:0-0

    novel graphene oxide semi-ipn nanocomposite hydrogel based on partially hydrolyzed polyacrylamide: preparation, swelling properties and adsorption studies of cationic methylene blue dye from water - صفحه:0-0

    novel mesoporous melamine-rich covalent organic polymer/cupric oxide-based microgel beads as promising robust heterogeneous nanocatalyst for highly efficient catalytic reduction of emerging water pollutants: in-situ and ex-situ investigations - صفحه:0-0

    novel poly(amide-urethane)s for high thermal stability applications - صفحه:0-0

    numerical study of polymer mixtures in complex geometry - صفحه:0-0

    numerical study on the effect of the viscosity on the pinch-off behavior of the droplet in drop formation process - صفحه:0-0

    optically transparent eudragit nanofibrous membrane with potential use in ocular tissue engineering - صفحه:0-0

    optimization of polycaprolactone and collagen polymers for tissue engineering applications - صفحه:0-0

    oxidized lignin cross-linked o-carboxymethyl chitosan /aminosilane modified ldh for enhanced tetracycline removal - صفحه:0-0

    oxygen permeation rate through pbat: a molecular dynamics simulation - صفحه:0-0

    passenger tire tread formulation based on silica/carbon black hybrid reinforcement system - صفحه:0-0

    performance evaluation of clarithromycin-loaded poly (ε-caprolactone) nanoparticles: a comparison between microfluidic and bulk mixing methods - صفحه:0-0

    phase morphology, thermophysical and mechanical properties of pcl and pdms based two soft segments tpu - صفحه:0-0

    pitch mesophase common rheological behaviors - صفحه:0-0

    pla/nmp system containing silica hybrids for bone tissue engineering - صفحه:0-0

    poly (acrylamide-co-(7-(allyloxy)-2h-chromen-2-one) and poly (acrylamide-co-n-(rhodamine-6g) lactam-n-allyloxy ethylenediamine)-derived fe3+ selective fluorescent sensor in aqueous media - صفحه:0-0

    poly(acrylic acid-co-itaconic acid) based antiscalant: synthesis and properties - صفحه:0-0

    poly(ionic liquid) based antibacterial hydrogels for wound healing - صفحه:0-0

    polyacrylamide hydrogel conductivity enhancement, the efficiency of mwcnt composition methods - صفحه:0-0

    polyaniline nanoparticles suspension: ion exchange behavior - صفحه:0-0

    polycaprolactone/pluronic f127 scaffold fabricated by 3d printing for bone tissue engineering - صفحه:0-0

    polyelectrolyte membrane based on chitosan blend for direct methanol fuel cell application - صفحه:0-0

    polymeric carrier based on polyethylene glycol (peg) / citric acid (ca) - صفحه:0-0

    polypyrrole nanoparticles synthesized in a continuous microfluidic reactor - صفحه:0-0

    polystyrene/poly(lactic acid) janus particles prepared by emulsion solvent evaporation method - صفحه:0-0

    polyurethane / cellulose /activated carbon nanocomposite membranes for removal of basic violet 16 from water - صفحه:0-0

    polyurethane / cellulose /activated carbon nanocomposite membranes for removal of methylene blue from water - صفحه:0-0

    polyurethane rigid foam synthesis using response surface methodology(rsm); morphological study - صفحه:0-0

    post-polymerization modification of amide functionalized copolymer nanaoparticles with oxazolidine for advanced anticounterfeitng and information encryption - صفحه:0-0

    prediction of tdi-based polyaspartic polyurea’s abrasion resistance - صفحه:0-0

    preparation and characterization of dox delivery carrier by polymer/silica nanostructure - صفحه:0-0

    preparation and characterization of hybrid organic-inorganic nanoparticle/pvdf blends - صفحه:0-0

    preparation and characterization of hybrid pcl/collagen sponge - صفحه:0-0

    preparation and characterization of novel antibacterial waterborne polyurethane electrospun fibers based on tannin for wound dressing application - صفحه:0-0

    preparation and characterization of photochromic polymer nanoparticles for the development of highly efficient anticounterfeiting nanoinks - صفحه:0-0

    preparation and characterization of propargylated electrospun cellulose acetate nanofibers as precursor for click chemistry - صفحه:0-0

    preparation and characterization of semi-ipn magnetic nanocomposite hydrogels based on partially hydrolyzed polyacrylamide/guar gum/ fe3o4@sio2 nps for enhanced oil recovery - صفحه:0-0

    preparation and evaluation of antibacterial pva/gelatin/nipu wound dressing membranes containing guanidine hydrochloride moieties - صفحه:0-0

    preparation and evaluation of water-in-soybean oil emulsions by microfluidic method - صفحه:0-0

    preparation and investigation of poly (styrene-co-butyl acrylate) composite particle size and color properties by suspension polymerization - صفحه:0-0

    preparation and investigation the properties of graphene-reinforced nanocomposites based on pmma/peo - صفحه:0-0

    preparation and mechanical characterization of the polyurethane and vitrimers polymers - صفحه:0-0

    preparation and properties of biodegradable nanocomposite foams based on pla/pbat/nanoclay - صفحه:0-0

    preparation and properties of biodegradable pla/pbat/nanoclay nanocomposite - صفحه:0-0

    preparation and properties of blend membranes of highly sulfonated polysulfone/fully fluorinated poly(aryl ether) for proton exchange membrane fuel cell application - صفحه:0-0

    preparation and properties of co-continuous pc/pet/mwcnt/gnp engineering polymer blend nanocomposites - صفحه:0-0

    preparation and properties of polycarbonate/ polysulfone blend membranes for potential application in water tretment - صفحه:0-0

    preparation and x_com simulation of x-ray epoxy-based polymer shielding - صفحه:0-0

    preparation of a magneto-responsive acrylic pressure-sensitive adhesive - صفحه:0-0

    preparation of bone tissue scaffold with improved biocompatibility, comprising of pcl and pvdf nanofibers via electrospinning process - صفحه:0-0

    preparation of core–shell acrylonitrile-styrene-acrylate impact modifier particles through seeded emulsion polymerization - صفحه:0-0

    preparation of dual emission mxene derived quantum dots - صفحه:0-0

    preparation of elastomeric sound absorber flexible thin sheets via devulcanized tire wastes - صفحه:0-0

    preparation of flexible shields for protection against gamma rays - صفحه:0-0

    preparation of hydrogel nanofibers of lignin through electrospinning - صفحه:0-0

    preparation of hydrophobic acrylic foldable intraocular lens for cataract surgery - صفحه:0-0

    preparation of light-responsive nanofibrous polymers - صفحه:0-0

    preparation of micro-nano structure from polyacrylonitrile (pan) by electrospun and selective removal - صفحه:0-0

    preparation of new fillers based on polyurethane and their application in 3d printing resins - صفحه:0-0

    preparation of paraffin/cnt/pp aerogel composite as a new phase change material - صفحه:0-0

    preparation of poly(l-lactic acid)/gelatin co-electrospun nanofibers as potential products for biomedical applications - صفحه:0-0

    preparation of poly(vinyl alcohol)/sodium alginate nanofibers - صفحه:0-0

    preparation of polyethersulfone-based membrane containing ionic liquid and its application for removal of coomassie brilliant blue dye - صفحه:0-0

    preparation of polystyrene microparticles by on-chip uv-polymerization through microfluidic channels - صفحه:0-0

    preparation of polyvinyl pyrrolidone (pvp)/carboxymethyl starch (cms) hydrogel for excellent absorption of wound secretions - صفحه:0-0

    preparation of pvdf-hfp gel polymer electrolytes with honey comb-like morphology structure for lithium-ion battery application - صفحه:0-0

    preparation of self-healing and anticorrosive epoxy coatings loaded with various inhibitor doped pani nanofibers - صفحه:0-0

    preparation of spherical micelles from diblock terpolymer based on poly(acrylic acid) in organic solvent - صفحه:0-0

    preparation of the modified polyethylenes using reactive extrusion for using in packaging industries and investigation of their physical and mechanical properties - صفحه:0-0

    preparation of thermochromic polymer based on rhodamine b for development of anticounterfeiting inks - صفحه:0-0

    preparation of thermoswitchable chromic nanocapsules containing leuco-dye via miniemulsion polymerization - صفحه:0-0

    preparation of tosyl cellulose acetate nanoparticles via nanoprecipitation - صفحه:0-0

    printability of gelma/alginate ipn reinforced by cof for tissue engineering application - صفحه:0-0

    printability of thiol-ene photoclick initiated bioinks - صفحه:0-0

    printability study of polyelectrolyte bioinks based on chitosan for 3dbioprinting applications - صفحه:0-0

    psf/hydrazone-linked cof mixed matrix membrane: a promising approach to dye wastewater purification - صفحه:0-0

    pu foam with interior walls of pcl nanofibers - صفحه:0-0

    pva hydrogels incorporated with croboxymethyl chitosan microcapsules containing tetracycline hydrochloride: morphology and antibacterial behavior - صفحه:0-0

    quaternary ammonium containing polyhydroxyurethane-graft-poly(ε-caprolactone) nanofibers as an antibacterial wound dressing - صفحه:0-0

    random copolymerization of alpha-olefins with functional monomers by cationic alcl3/h2o catalytic system - صفحه:0-0

    reduction-sensitive flower like magnetomicelle based on pcl-ss-peg-ss-pcl triblock copolymer as anti-cancer drug delivery system - صفحه:0-0

    reflectance and photophysical properties of rhodamine 6g (rh 6g)/2-(4-methyl-2-oxo-2h-chromen-7-yloxy) acetic acid (mohcyaa) hybrid for application in cold dye - صفحه:0-0

    reinforced poly (lactic acid) by modified cellulose nanofibers extracted from rice straw applicable for tissue engineering - صفحه:0-0

    reinforcement of nanofibrous scaffolds based on polylactic acid/alginate using platelet-enriched plasma - صفحه:0-0

    removal of basic violet-16 cationic dye from aqueous solution by novel nanocomposite hydrogel containig of halloysite nanoclay - صفحه:0-0

    review of properties, application, dispersion, and compatibilizing of some mineral particles in the presence of branched/ functional polymers - صفحه:0-0

    rheologiacal properties investigation of flopaam 360s solution regard to temperature and salinity - صفحه:0-0

    rheological and structural behavior of gellan-agar comprising poly aniline-graphene nanocomposite as a candidate for neural conduit - صفحه:0-0

    rheological behavior of poly(lactic acid)/ silicon rubber/ silicon modified graphene oxide - صفحه:0-0

    rheological behaviors as criteria for the size of blow molded polyethylene articles - صفحه:0-0

    rheological properties and miscibility studies of blown films made from recycled ldpe/lldpe films - صفحه:0-0

    rheological properties of pe-b-peg block copolymer in selective solvent - صفحه:0-0

    rheological study of alginate-gelatin hydrogel for tissue engineering bioprinting - صفحه:0-0

    rheological study of modified starch with multifunctional citric acid - صفحه:0-0

    rheology, morphology and electrical conductivity of polyethylene (pe)/ethylene vinyl acetate (eva) blends filled with carbon black - صفحه:0-0

    self healable diels-alder crosslinked polyurethane elastomers based on furane modified calix[4]arene - صفحه:0-0

    significant enhancement of thermal conductivity in epoxy filled ceramic fillers - صفحه:0-0

    silicone rubber compounds as sealant for polymer fuel cells: a study of curing systems and nanoparticle properties - صفحه:0-0

    simulation of bulk photopolymerization of furfuryl acrylate - صفحه:0-0

    simulation of rubber hose curing - صفحه:0-0

    simulations of the x-ray shielding materials using the mcnp metod - صفحه:0-0

    smart block copolymers as fluorescence chemosensors - صفحه:0-0

    soft contact lenses with high oxygen permeability and high surface wettability - صفحه:0-0

    solid and semi-liquid state foaming of polypropylene copolymers towards production of expanded polypropylene beads with double melting peaks - صفحه:0-0

    space state temperature control of poly(butylene succinate) esterification reactions - صفحه:0-0

    stabilizing organized surface structures in casting solutions of ionic block copolymer membranes - صفحه:0-0

    stimuli-responsive pamam dendritic macromolecules for optical detection of food spoilage - صفحه:0-0

    structure-properties comparison of random and block hydroxyl terminated polyether copolymer (htpe and tpeg) - صفحه:0-0

    study of ma-poss nanoparticles dispersion in the poly(ethylene glycol) dimethacrylate (pegdma) matrix - صفحه:0-0

    study of surface modification of pebax-2533 membrane by mediocrity-sized amine compounds on co2 gas separation properties - صفحه:0-0

    study on characteristics and properties of chitosan-based polymer electrolytes - صفحه:0-0

    study on mechanical and thermal properties of polyvinyl chloride nanocomposites reinforced with the azo-containing phenol derivative - صفحه:0-0

    study on photo-physical properties of semi-conducting polymers with different feeding manners: a case study of meh-ppv - صفحه:0-0

    study on the effect of heat treatment on the tensile properties of nanofibrous composites - صفحه:0-0

    study on the effect of processing parameters and lldpe concentration on the haze of ldpe/lldpe blown films - صفحه:0-0

    study on the preparation, properties, and performance of new superparamagnetic nanocomposite of pani-fe3o4-tio2 in polymer solar cells - صفحه:0-0

    studying rheology of the fene-p chains using a micro-macro approach - صفحه:0-0

    studying the effect of changing the amino number of curing agent on the properties of antifouling coating of e-pvc reactors in arvand petrochemical complex - صفحه:0-0

    studying the microstructures of hydroxyl-terminated polybutadiene and hydrobrominated hydroxyl-terminated polybutadiene using nmr analysis - صفحه:0-0

    stydy effect of poss side pendant group length on rheological properties of ldpe and ps nanocomposites - صفحه:0-0

    sulfonated aromatic polymers and organically modified montmorillonite nanocomposite membranes for fuel cells applications - صفحه:0-0

    supercooling suppression of microencapsulated phase change materials (mpcms) with melamine formaldehyde shell by adding nucleating agent into the core material prior to encapsulation - صفحه:0-0

    superhydrophobic polyurethane foams coated with flurobutanol modified rgo nanosheets for effective continuous oil-water separation - صفحه:0-0

    supramolecular hydrogels using host-guest inclusion complexes with cyclodextrins - صفحه:0-0

    surface engineering of reduced graphene oxide by grafting poly(butyl acrylate) chains for use in dielectric polymer nano-composites - صفحه:0-0

    surface modification of poly ether block amide membrane – the role of amine compounds in carbon dioxide gas separation properties - صفحه:0-0

    surface modification of polypropylene hollow fiber ultrafiltration membrane by plasma and polyethylene glycol - صفحه:0-0

    surface modification of silica aerogel nanostructure by citric acid for wastewater treatment - صفحه:0-0

    surface modification of silica nano particles by graft polymerization of acrylamide and effect of the particles on the gas separation properties of pebax membrane - صفحه:0-0

    synergistic effect of cellulose nanofibers lamina and clay nanoparticles on mechanical properties of epoxy resin - صفحه:0-0

    synergistic effect of hybrid halloysite nantube– calcium carbonate as a nanofiller in enhancing the mechanical properties of pvc composites - صفحه:0-0

    synthesis and application of grafted microcrystalline cellulose with imidazolium-based ionic liquid for demulsification of w/o emulsion - صفحه:0-0

    synthesis and characterization amino-modified magnetic core-shell triazine-based covalent organic polymer as an efficent dye adsorbent - صفحه:0-0

    synthesis and characterization of 2d layered cu-ppda coordination polymer - صفحه:0-0

    synthesis and characterization of a novel conductive copolymer based on imidazole derivative compound and aniline - صفحه:0-0

    synthesis and characterization of biodegradable anti-bacterial polyurethane coatings in deep eutectic solvents - صفحه:0-0

    synthesis and characterization of carboxymethylhexanoyl chitosan as a promising biomatherial - صفحه:0-0

    synthesis and characterization of chromium-based heterogeneous catalysts containing tridentate ligands for the production of 1-hexene - صفحه:0-0

    synthesis and characterization of conductive polymers based on carbazole structure and investigation of their physical, electrochemical and sensor properties - صفحه:0-0

    synthesis and characterization of corrosion resistance and superhydrophobic fluorine-based coating via sol-gel process - صفحه:0-0

    synthesis and characterization of florinated waterborne epoxy dispersion - صفحه:0-0

    synthesis and characterization of fluorescent polyurethane - صفحه:0-0

    synthesis and characterization of hydrogel nanocomposite polyacrylamide /halloysite nanotubes /chitosan for wound dressing - صفحه:0-0

    synthesis and characterization of modified polyisobutylene-based oil-soluble dispersants from polyisobutylene succinimides - صفحه:0-0

    synthesis and characterization of nanocomposites based on thermoplastic polyurethane/cellulose nanocrystals - صفحه:0-0

    synthesis and characterization of novel high performance poly(sulfone-amid) alternative copolymers for water desalination membranes - صفحه:0-0

    synthesis and characterization of novel poly(sulfone urethane) based on urethane diol oligomer for membrane desalination - صفحه:0-0

    synthesis and characterization of poly(aniline-co-carbazole)@fe3o4 magnetic nanocomposite for x-band microwave shielding application - صفحه:0-0

    synthesis and characterization of polyurethane bioadhesive based on castor oil - صفحه:0-0

    synthesis and characterization of reversible photochromic spiropyran containing ionic liquid - صفحه:0-0

    synthesis and characterization of thermoplastic polyurethane composite based on epoxy filler - صفحه:0-0

    synthesis and characterization of thermosensitive gel containing pcl nanoparticles as a promising candidate for drug delivery - صفحه:0-0

    synthesis and characterization pva electro-spun nanofibers containing encapsulated vitamin c in chitosan microspheres - صفحه:0-0

    synthesis and charectrization unsaturated random copolyether-ester and investigation their curing mechanism using rheology - صفحه:0-0

    synthesis and curing of thermoset bismaleimide resin based on epon 828 epoxy resin - صفحه:0-0

    synthesis and evaluation of optical and adhesion properties of a fluorescent pressure-sensitive adhesive - صفحه:0-0

    synthesis and identification of a porous organic polymer and its application for adsorption of anionic dyes - صفحه:0-0

    synthesis and identification of porous organic polymer based on triazine and its application in volatile iodine adsorption - صفحه:0-0

    synthesis and optimized electrospinning of oxidized carboxymethyl cellulose - صفحه:0-0

    synthesis and properties of poly(styrene-co-butyl acrylate)/ clay nanocomposite prepared by latex componding method - صفحه:0-0

    synthesis of a novel bisphotochromic dye based on 1,3-diazabicyclo[3.1.0]hex-3-ene - صفحه:0-0

    synthesis of amide functionalized photoluminescent polymer nanoparticles containing oxazolidine for development of photoluminescence oleds - صفحه:0-0

    synthesis of amphiphilic diblock copolymer peg-b-pmma by atom transfer radical polymerization and investigation of its surface properties - صفحه:0-0

    synthesis of an eco-friendly multifunctional fluorinated urethane-acrylate resin as a promising uv-cured coating for anticorrosive applications - صفحه:0-0

    synthesis of bisphenol a-free epoxy resin from pentaerythritol tetrarosin ester - صفحه:0-0

    synthesis of chitosan/polyvinyl alcohol beads for adsorption of copper from aqueous solution - صفحه:0-0

    synthesis of graphene oxide@mill 101(cr) composite to investigate the absorption of pollution from industrial effluents - صفحه:0-0

    synthesis of graphene@fe3o4@polyaniline nanocomposite for simultaneous removal of a binary mixture of malachite green cationic dye and acid red 1 anionic dye from aqueous solutions - صفحه:0-0

    synthesis of green magnetic biopolymer tannin gel in the simultaneous removal of malachite green and sunset yellow dyes - صفحه:0-0

    synthesis of hybrid graphene-based filler as a promising filler to alter the hydrophobicity/hydrophilicity of the polymeric coatings - صفحه:0-0

    synthesis of hydroxyl-terminated polyether (htpe) by innovative approach using the williamson method - صفحه:0-0

    synthesis of imidazolium based triazol poly(ionic liquids) by atom transfer radical polymerization (atrp) in the presence of green macroinitiator to demulsification of w/o emulsion - صفحه:0-0

    synthesis of imidazolium-based polymeric ionic liquid as supercapacitor active material - صفحه:0-0

    synthesis of janus nanoparticles based on methylmathacrylate/methacrylamide copolymer by emulsion polymerization: ivestigation of size and morphology - صفحه:0-0

    synthesis of low viscosity polyalfaolefin oils using deep eutectic solvent/ aluminium chloride system - صفحه:0-0

    synthesis of mof525@pani composite as absorbent of organic dies - صفحه:0-0

    synthesis of nano-gelatin containing curcumin and investigating the effect of glutaraldehyde as a crosslinker in drug delivery - صفحه:0-0

    synthesis of nanocellulose functionalized with ph-sensitive polymer to remove methylene blue from wastewater - صفحه:0-0

    synthesis of new hydrogel nanocomposite based on acrylamide and its application to remove basic violet 16 dye from water - صفحه:0-0

    synthesis of new ziegler nata catalyst based on magnesium ethoxide with controlled morphology in the presence of different internal donor structures for polypropylene polymerization - صفحه:0-0

    synthesis of novel triazole-based poly vinyl imidazolium ionic liquid for demulsification of water in crude oil emulsions - صفحه:0-0

    synthesis of organo-soluble gold nanoparticles on poly(n,n-dimethyl aminoethyl methacrylate) - صفحه:0-0

    synthesis of pmma latex nanoparticles containing different functional groups by emulsion polymerization for development of photoswitchable spiropyran polymer nanoparticles - صفحه:0-0

    synthesis of poly (propylene imine) dendrimer with ethylenediamine core and investigation of dendrimer's response to glucose at different ph - صفحه:0-0

    synthesis of poly(ethylene glycol)-b-polystyrene microbubbles - صفحه:0-0

    synthesis of polymer-clay composite with application for hydrofinishing reactions - صفحه:0-0

    synthesis of polyurethane nanocomposites and investigation of their mechanical properties - صفحه:0-0

    synthesis of polyvinylidene fluoride/polythiophene as gel polymer electrolytes for lithium-ion batteries - صفحه:0-0

    synthesis of reactive core-shell particles and their use in toughening of poly(lactic acid) - صفحه:0-0

    synthesis of spiropyran functionalized polymer nanoparticles and investigation the effect of local polarity on kinetics of photoresponsivity - صفحه:0-0

    synthesis of star-shaped polycaprolactone using glycerol as initiator - صفحه:0-0

    synthesis of star-shaped polyurethane using polycaprolactone with three arms and investigation of its shape memory performance - صفحه:0-0

    synthesis of sulfonated polyaniline composite on the surface of pencil graphite electrode and its application in ammonium detection - صفحه:0-0

    synthesis of sulfonated polyaniline-nylon6 nanoblend - صفحه:0-0

    synthesis of the uv curable anticounterfeiting ink based on waterbased urethane acrylate resin, modified with rhodamin b - صفحه:0-0

    synthesis of thermoplastic polyurethane membranes with different molar ratios and investigation of their co2/n2/h2 gases permeability - صفحه:0-0

    synthesis of three novel silane-based carboxylic acids for application in methacrylated epoxy-based oligomers and their ability in the uv curable hybrid coatings - صفحه:0-0

    synthesis of water-based acrylic resin modified with epoxy resin to improve printability properties of coatings on pvc substrate - صفحه:0-0

    synthesis of water-soluble sulfonated polyaniline (spani) and investigation of its effect on the short-circuit current in the perovskite solar cells - صفحه:0-0

    synthesis of waterborne epoxy based on e6 and diethanolamine - صفحه:0-0

    synthesis of well-known raft agent for living polymerization of 2-hydroxyethyl methacrylate (hema) - صفحه:0-0

    synthesis, characterization and polymerization of hema on fe3o4 nanoparticles via si-atrp - صفحه:0-0

    synthesis, characterization, and membrane desalination application of a novel poly(sulfone sulfide) - صفحه:0-0

    synthesising iron oxide@silica@gelatin nanoparticles - صفحه:0-0

    synthesize of hydrogel nanocarriers for controlled release of anti-cancer drug - صفحه:0-0

    temperature responsive ps-b-pnipam grafted substrates developed by surface-initiated atrp technique - صفحه:0-0

    tfc organic solvent nanofiltration membrane fabricated by a novel hdpe membrane support covered by manganese dioxide /tannic acid-fe (iii) layers - صفحه:0-0

    the abnormal analysis of number average molecular weight of sulfonated melamine formaldehyde (smf) - صفحه:0-0

    the comparison between degradation of polymeric in-situ forming implants in in-vitro and in-vivo conditions - صفحه:0-0

    the effect of acrylic based ionomer gel microstructure and electrolyte type on the volume conductivity of assembled battery separator - صفحه:0-0

    the effect of bulk acoustic waves on glass bead dispersion inside the 3d prinint resin materials - صفحه:0-0

    the effect of carboxymethylcellulose on the cellular structure of polyethylene foam - صفحه:0-0

    the effect of chitosan- biopolymer as coated solid lipid nanoparticles in mucoadhesive drug delivery - صفحه:0-0

    the effect of chopped carbon fiber on ablative behaviour of epdm based elastomeric insulation - صفحه:0-0

    the effect of crosslinker on glass transition temperature and crystallinity during synthesis of liquid crystalline elastomers - صفحه:0-0

    the effect of eggshell powder on biodegradability and permeation of pla films - صفحه:0-0

    the effect of fumed silica and ath on the vulcanization and mechanical properties of silicone rubber - صفحه:0-0

    the effect of graphene quantum dots on the stability of graphene-based conductive inks - صفحه:0-0

    the effect of hydroxypropyl cellulose presence on the morphology and physical properties of polyvinyl alcohol nanofibers - صفحه:0-0

    the effect of mg-al layered double hydroxide nanoparticles on the performance of polycarbonate membranes in water treatment - صفحه:0-0

    the effect of pmdi on the morphology and physical/mechanical properties of pla/pbat blends with a packaging application - صفحه:0-0

    the effect of polymerization temperature of ultra high molecular weight polyethylene (uhmwpe) on microstructure - صفحه:0-0

    the effect of pre-impregnated tape width on printability and shear properties of continuous fiber-reinforced composites - صفحه:0-0

    the effect of pvp molecular weight and synthesis temperature on silver nanowire morphology - صفحه:0-0

    the effect of the hybrid presence of two nanoparticles on improving the toughness of pla/nr eco-friendly blend - صفحه:0-0

    the effect of the presence of chondroitin sulfate on porosity and mechanical properties of enzymatically cross linked silk fibroin/ chondroitin sulfate hydrogel - صفحه:0-0

    the effect of titanium dioxide nanoparticles on the morphology and physical/mechanical properties of poly(l-lactic acid)/gelatin hybrid nanofibers as potential scaffolds in tissue engineering - صفحه:0-0

    the effect of wood content and layer thickness on tensile properties of wood flour/ pla composites fabricated by fdm - صفحه:0-0

    the effect of zinc stearate on the processability of high density polyethylene (hdpe) - صفحه:0-0

    the effects of reduced graphene oxide on thermal properties of polylactic acid/ethylene vinyl-acetate copolymer blends - صفحه:0-0

    the green synthesis of silver nanoparticles on cotton fabrics by henna leaves extract - صفحه:0-0

    the influence of crosslinked acrylonitrile-styrene-acrylate impact modifier on the mechanical and thermal properties of rigid poly(vinyl chloride) - صفحه:0-0

    the influence of electrospinning parameters on morphological properties of polyamide-6,6 nanofibers - صفحه:0-0

    the influence of nano and micro sio2 particles on the mechanical behavior of 3d printed samples - صفحه:0-0

    the influence of silica localization on the mechanical behavior of polyamide 6- reclaimed rubber blends - صفحه:0-0

    the influences of the poe-mah compatibilizer on the morphology, mechanical, and rheological behavior of n6/pc/go nanocomposites - صفحه:0-0

    the investigation of solvent synergy effect on conjugated polymer photo-physics properties: a case study of meh-ppv - صفحه:0-0

    the origin of charge transport synergism in the hybrid of geometrically anisotropic and conductive nanoparticles: a monte carlo simulation study - صفحه:0-0

    the potential of pim-1/nano silver air separation membranes application in the production of the face masks in the covid-19 pandemic - صفحه:0-0

    the relationship between hydrogen bonding, degree of crystallinity and shape memory behavior of pu/fe3o4 nanocomposites - صفحه:0-0

    the release behavior of tetracycline hydrochloride (tch) from carboxymethyl chitosan (cmcs)/ montmorrilonite (mmt) microcapsules - صفحه:0-0

    the rheological characterization of different concentrations of bacteria in the polymer solution - صفحه:0-0

    the role of carbon black as the secondary filler in improving non-linear viscoelastice behavior of styrene-butadiene rubber compound filled with modified silica - صفحه:0-0

    the solid state rheological investigation of core-shell impact modifier nanoparticles efficacy: 3-d networking - صفحه:0-0

    the study of poly (erythritol-co-dodecanedioate)/ lignocellulose nanofiber for tissue engineering application - صفحه:0-0

    the synergetic antibacterial effects of amine terminated dendritic groups/ cationic gemini surfactant on cotton goods - صفحه:0-0

    the synergistic effect of graphene nano-platelets and antioxidant in improving the thermo-oxidative stability of high-density polyethylene - صفحه:0-0

    the transient shear flow of viscoelastic fluids in concentric annuli - صفحه:0-0

    theoretical and experimental study on aluminum particulate composites as thermal radiation barrier - صفحه:0-0

    thermo- and photo-switchable nanocapsules containing leuco-dye mixture and spiropyran - صفحه:0-0

    thermodynamical evaluation of the reinforcing mechanism in graphene oxide/ acrylonitrile butadiene rubber composites - صفحه:0-0

    three dimensionally culture of sheep preantral follicles in a thiolated hyaluronic acid hydrogel - صفحه:0-0

    titanium-silasequioxane coordination compound as a heterogeneous, thermally stable catalyst: synthesis and characterization - صفحه:0-0

    toxicity assessments of polymeric nanoparticles in biomedicine - صفحه:0-0

    traceable smart hydrogel with high capacity for efficient drug administration - صفحه:0-0

    transparent film heater based on silver nanowires - صفحه:0-0

    using polyaniline/montmorillonite adsorbent nanocomposite to remove tannic acid pollutant from water environment - صفحه:0-0

    using raman and ftir spectroscopy for demonstrate fillers in polypropylene compound structure - صفحه:0-0

    uv cured and uv resistant polyurethane acrylate nano-composite coatings,modified by zno-based nanoparticles and tinuvin-292 - صفحه:0-0

    van gurp-palmen plots for blends of linear and branched polyethylenes at various temperatures - صفحه:0-0

    various co-polymers of mba-poly(n-vinyl-2-pyrrolidone) macromolecular coordination complex as a novel and recyclable lewis acid catalyst: synthesis, characterization, and performance towards well-know organic reaction - صفحه:0-0

    viscoelastic properties of a zinc oxide-filled acrylate pressure sensitive adhesive - صفحه:0-0

    visualization of latent fingerprints by powder dusting of spiropyran copolymer nanoparticles - صفحه:0-0

    water absorption and thermal stability of waterborne polyurethaneacrylate/nanoclay films - صفحه:0-0

    waterborne polyurethane films impregnated with ag@go-pda nanostructures for photothermal therapy of infected dermal wounds - صفحه:0-0

    wearable electronic nose sensor based on pvdf/ carbon black electrospun layers - صفحه:0-0

    zeolitic imidazolate frameworks (zif 67) mixed matric membrane in co2 separation: fabrication and permeability study - صفحه:0-0

    zinc oxide-filled, acrylate pressure sensitive adhesive: adhesion and antibacterial evaluations - صفحه:0-0

    κ-carrageenan/triazin-based covalent organic framework nanocomposite: preparation, characterization, and application in bb41 dye removal - صفحه:0-0