a study of the magnetic properties of iron nanowires with varying aspect ratios by micromagnetic simulation - صفحه:0-0

    a study on the therapeutic potential of carbon nanotube as drug delivery carrier for anticonvulsant application - صفحه:0-0

    a ternary nanobiocomposite involving magnetic carboxymethyl cellulose-silk fibroin hydrogel and magnetic iron oxide particles exhibiting excellent biological activity and hyperthermia of cancer therapy - صفحه:0-0

    achieving nanostructured superaustenitic stainless steel by severe plastic deformation - صفحه:0-0

    adsorption of flavonoids using zinc aluminium layered double hydroxides-kinetic, and isotherm studies - صفحه:0-0

    adsorption performance of bimetallic zif - صفحه:0-0

    ag-treated cotton fabric: antibacterial, physical, hydrophobicity, steady-statethermal and mechanical properties - صفحه:0-0

    an alginate-based composite hydrogel for heart tissue engineering - صفحه:0-0

    an investigation on dissimilar welding between aisi420 martensitic stainless steel and aisi austenitic stainless steel 304 - صفحه:0-0

    artificial intelligence in material science: opportunities and challenges - صفحه:0-0

    bioactive improvement of ti-6al-4v alloy by produce tio2 spherical nanotubes on its surface for dental use - صفحه:0-0

    brazing of alumina to zirconia using an oxide filler - صفحه:0-0

    characterization and investigation of process parameters in extrusion additive manufacturing of alumina ceramic parts - صفحه:0-0

    characterization of ni-free co–29cr–6mo-0.17n alloy powders with ultrafine-grained microstructure prepared by mechanical alloying - صفحه:0-0

    coating of nickel-aluminum -ldh on titanium oxide nanotubes for pure hydrogen production by photoelectrochemical method - صفحه:0-0

    corrosion and microstructure evaluation of nickel-aluminum bronze alloys with varying compositions and cooling media for marine propellers - صفحه:0-0

    damping performance and strain rate sensitivity of multi-phase high entropy alloy - صفحه:0-0

    development of multifunctional composite coatings by electrophoretic deposition on biomedical implants - صفحه:0-0

    development of spd techniques for producing ufg mg-zn-ca alloys with superior properties for medical purposes - صفحه:0-0

    digital transformation in metallurgical engineering - صفحه:0-0

    dislocation configurations of high-temperature long-term exposed polycrystalline gtd-111 nickel-based superalloy - صفحه:0-0

    doping of zno nanorod scaffold for photoelectrochemical water splitting: comparison of seed layer and nanorod doping - صفحه:0-0

    double twin parallel channel angular extrusion as a development of the ecap process, a step towards industrialization - صفحه:0-0

    driving innovation and entrepreneurship by universities - صفحه:0-0

    effect of friction stir processing on microstructure and mechanical properties of weld made by metal inert gas welding - صفحه:0-0

    effect of heat treatment on the high temperature tensile properties of inconel 718 alloy manufactured via direct energy deposition - صفحه:0-0

    effect of magnetite nanoparticles content and surface modification on tack of a pressure-sensitive adhesive - صفحه:0-0

    effect of sintering temperature and al content on microstructure/hardness of sps processed alxcocumnni (x= 1, 0.25) high entropy alloys - صفحه:0-0

    effect of temperature on the mechanical behavior of a heterogeneous high entropy alloy - صفحه:0-0

    effect of thickness on photoconversion efficiency of al2tio5/tio2/al2o3 nanocomposite films in water splitting - صفحه:0-0

    effect of zinc powder addition on microstructural behavior of fe-mn alloy fabricated by mechanical milling - صفحه:0-0

    effects of nanoglass process factors on its microstructure: a molecular dynamics study - صفحه:0-0

    effects of steel fibers and cu powder on wear and friction characteristics of brake pads - صفحه:0-0

    efficacy of blending g-c3n4 positioning in the polysulfone support layer on the performance of fo membrane for removal of dexamethasone - صفحه:0-0

    elastic properties characterization of fully exfoliated polymeric nanocomposite using finite element method - صفحه:0-0

    electrochemically responsive nanoarchitected 3d microstructures - صفحه:0-0

    electrophoretic deposition of organic/inorganic based nanocomposite coating on biodegradable mg alloy: characterization and corrosion behavior - صفحه:0-0

    empowering health equity through biomedical engineering: innovations in microfluidics and bioprinting - صفحه:0-0

    enhancement photocatalytic activity of tio2 toward tetracycline under visible light via agbr nanoparticles and ceria nanocubes - صفحه:0-0

    evaluation of thermal energy storage capacity of heat transfer fluid based on phase change materials nanocapsouls - صفحه:0-0

    fabrication and characterization of dexamethasone-releasing polylactic acid nanospheres for treatment of hearing loss - صفحه:0-0

    fabrication and characterization of nanostructured reduced graphene oxide derived from the peel of wild pistachio fruits - صفحه:0-0

    fabrication and performance evaluation of mxene for electrochemical detection of glucose - صفحه:0-0

    feasibility of solid-state additive manufacturing in fabrication of functionally graded aa7075/al2o3 nanocomposite - صفحه:0-0

    fine-grained duplex stainless steel by cold rolling and reversion/recrystallization annealing - صفحه:0-0

    finite element & artificial nueral network analysis of ecap - صفحه:0-0

    formation and recovery behavior of hetero-nanostructured metals processed by high-pressure torsion - صفحه:0-0

    formation of nano-structured tribolayer on ti 6al 4v during sliding in a phosphate buffer saline solution - صفحه:0-0

    free-binder conimn ldh/nickel foam electrodes for supercapacitor and water splitting applications - صفحه:0-0

    friction stir processing of nitinol (niti) alloy - صفحه:0-0

    friction stir welding/processing of metals and alloys - صفحه:0-0

    functionalized mwcnt needle-based biosensor, a new medical device for intra-operative detection of breast cancer margins - صفحه:0-0

    g-c3n4/zns type-ii heterojunction for photocatalytic water splitting - صفحه:0-0

    grain refinement and improved tensile properties of ti-modified aisi 316l stainless steel by cold rolling and annealing - صفحه:0-0

    green synthesis and surface modification of fe3o4 nanoparticles using curcumin extract and gum tragacanth for biomedical applications - صفحه:0-0

    highly selective separation of zn and cd utilizing the superparamagnetic nanoadsorbents functionalized with d2ehpa and tbp dual extractants - صفحه:0-0

    impact of tio2/ceo2 nano-particles applied in peo on hydrophobicity and corrosion resistance of mg az21 alloy - صفحه:0-0

    implementation of design of experiments on interlayer friction stir spot welding (il-fssw) for 304 stainless steel and 6061 aluminum alloy joints - صفحه:0-0

    improved mechanical properties, grain refinement, and modification of mg-si in situ composites by yttrium addition and adjusting cooling rate during solidification - صفحه:0-0

    in situ synthesis of silver nanoparticles in silk fibroin substrate for the development of antibacterial textiles - صفحه:0-0

    increase strength and ductility in high entropy alloy fe49.5mn30co10cr10c0.5 engineered by friction stir processing - صفحه:0-0

    increasing electrochemical behavior of ni nanostructure coating with adding sic nanoparticles by electrodeposition method - صفحه:0-0

    investigating of the electroless bath deposition temperature effect on the microstructural properties of ni-p/ni-b-ceo2 coatings - صفحه:0-0

    investigating shear behavior of al-cnt nanocomposites: the influence of loading direction through molecular dynamics simulations - صفحه:0-0

    investigating the effect of al addition to the zr50cu50 binary alloy on the structure and atomic short-range order using molecular dynamics simulation - صفحه:0-0

    investigating the interaction of dislocations with precipitates via nano- and micro-mechanics - صفحه:0-0

    investigation of experimental condition effects on the behavior of synthesized hkust-1 using electrochemical method - صفحه:0-0

    investigation of pulsed fiber laser welding parameters on haynes 25 (l605) cobalt based alloy to produce ultrafine grained structure - صفحه:0-0

    investigation of the zinc oxide corrosion impact on the self-propulsion of rod-shaped microswimmers under the influence of h2o2 fuel and uv light radiation - صفحه:0-0

    investigation of torsional buckling of carbon nanotubes using structural mechanics - صفحه:0-0

    low-temperature thermoelectric nanomaterials for waste heat recovery in proton exchange membrane fuel cells - صفحه:0-0

    machine learning prediction of flow stress of bulk metallic glasses during thermoplastic deformation within the supercooled liquid region - صفحه:0-0

    microfluidic-aided synthesis of poly (ℇ-caprolactone) nanoparticles containing dexamethasone: morphology, size distribution and release studies - صفحه:0-0

    microstructural evaluation of stellite 6 and stellite 6 reinforced with nbc particles coatings fabricated by laser cladding - صفحه:0-0

    modification of medical cotton gauze with copper-based metal-organic framework (cu-mof) with antimicrobial activity for wound dressing applications - صفحه:0-0

    molecular dynamics study on cuzr nanoglass produced by controlling slm parameters - صفحه:0-0

    monotonic and cyclic mechanical behavior of trip-assisted high entropy alloys - صفحه:0-0

    morphology and mechanical properties of 3d printed pcl-pla-zno nanocomposite scaffolds - صفحه:0-0

    nanostructured composite biomaterials for cancer treatment and tissue engineering - صفحه:0-0

    nanostructured metallic materials from severe plastic deformation (spd): physical nature of superstrength and strengthening mechanisms - صفحه:0-0

    on the microstructure and hardness of cu-go nanocomposite produced by accumulative roll bonding processing - صفحه:0-0

    overcoming the trade-off between strength and ductility in high entropy alloys - صفحه:0-0

    photocatalytic characteristics of bifeo3 nanopowder synthesized via mechanothermal route - صفحه:0-0

    photocatalytic degradation of methylene blue by cu-doped zno/5 wt.% g-c3n4 nanocomposite - صفحه:0-0

    predicting elastic modulus of calcium phosphate-containing 3d composite bone scaffolds using machine-learning approaches - صفحه:0-0

    recent progresses in the development of green electrocatalysts for sustainable energy production - صفحه:0-0

    role of high-pressure torsion temperature on microstructure, mechanical properties, and corrosion behavior of pure copper - صفحه:0-0

    severe plastic deformation of additive-manufactured alloys - صفحه:0-0

    stabilizing the ultrafine-grained austenite with a high strength in the microstructure of an fe-9ni-6mn alloy under high-pressure torsion - صفحه:0-0

    study the effect of fe nanoparticles doped on graphene nanosheets - صفحه:0-0

    synthesis and characterization of a magnetic recoverable bafe12o19/g-c3n4 nanocomposite for efficient photodegradation of rhodamine b - صفحه:0-0

    synthesis and characterization of cds/hkust-1 composite and its application in removal and degradation of methylene blue and tetracycline from water sources - صفحه:0-0

    synthesis and characterization of porous silica microparticles capped with cuo for antibacterial drug delivery system application - صفحه:0-0

    synthesis and characterization of self-healing composite hydrogel as bone tissue engineering scaffold - صفحه:0-0

    synthesis and characterization of strontium and zinc co-doped nano-hydroxyapatite via hydrothermal method for enhanced bone formation ability - صفحه:0-0

    synthesis and photocatalytic properties of fe2o3/g-c3n4 nanocomposite powder - صفحه:0-0

    synthesis, characterization, and biomedical applications of gold nanoparticles using iranian native henna extract - صفحه:0-0

    tailoring deformation characteristics of bulk metallic glass composites - صفحه:0-0

    the effect of hardening accelerators on the properties of low cement alumina-based gunning refractories with aluminum silicate plasticizer - صفحه:0-0

    the effect of molecular weight on the toughness of sintered polyethylene - صفحه:0-0

    the effect of ti/ru volume ratio in titanium and ruthenium nano oxide mixed coating on titanium by electrodeposition method - صفحه:0-0

    the influence of current density and treatment time on peo coatings on az91 magnesium alloy - صفحه:0-0

    the influence of friction stir processing on microstructure and tribological behavior of si3n4-reinforced 5083 aluminum alloy - صفحه:0-0

    the visible-light photocatalytic activity and structural variation of zno/cuo nanocomposites synthesized under alkaline conditions - صفحه:0-0

    ultrafine grained materials and sustainable development - صفحه:0-0

    wear properties of al2o3/mos2 nanocomposite coatings created by electro spark deposition and oxidation on the surface of ti-6al-4v alloy - صفحه:0-0