journal of applied fluid mechanics سال:2019 - دوره:12

Fa | Ar | En


journal of applied fluid mechanics
سال:2019 - دوره:12 - شماره:4

2-d simulation with oh* kinetics of a single-cycle pulse detonation engine - صفحه:1249-1263 a detailed study of boost pressure and injection timing on an rcci engine map fueled with iso-octane and n-heptane fuels - صفحه:1161-1175 attempt to suppress numerical viscosity in incompressible sph method - صفحه:1231-1240 blood flow in channel constrictions: a lattice-boltzmann consistent comparison between newtonian and non-newtonian models - صفحه:1333-1345 capillary wave and initial spreading velocity at impact of drop onto a surface - صفحه:1265-1272 cfd study of the effect of geometrical shape of separation blades on the rotor performance of an annular centrifugal extractor (ace) - صفحه:1189-1202 channel blockage and flow maldistribution during unsteady flow in a model microchannel plate heat exchanger - صفحه:1023-1035 detection of cavitation through acoustic generation in centrifugal pump impeller - صفحه:1103-1113 effect of fin parameters in cylindrical and divergent duct under natural convection - صفحه:1093-1102 effect of gap ratio on the wake behind two side-by-side flat plates - صفحه:1213-1222 effect of nozzle pressure ratio and control jets location to control base pressure in suddenly expanded flows - صفحه:1127-1135 effect of property variation on the fluid flow and thermal behavior in a vertical channel - صفحه:1177-1188 effect of slot-guidance and slot-area on air entrainment in a conical ejector diffuser for infrared suppression - صفحه:1303-1318 effect of γ-al2o3/water nanofluid on natural convection heat transfer of corrugated ┐ shaped cavity: study the different aspect ratio of grooves - صفحه:1151-1160 effectiveness of stent in the treatment of renal artery aneurysm using fsi simulation - صفحه:1347-1358 experimental and numerical investigation of the efficiency and pressure drop of an inertial impactor with variable area - صفحه:1287-1302 experimental investigation on acoustic wave generation due to supersonic hot jet impingement on an inclined flat plate - صفحه:1063-1072 finite element analysis of pulsatile blood flow in elastic artery - صفحه:1083-1091 numerical analysis of a two-phase flow (oil and gas) in a horizontal separator used in petroleum projects - صفحه:1037-1045 numerical analysis of performance deterioration of a centrifugal pump operating in two-phase flows - صفحه:1203-1211 numerical investigation of influence of flow rates on combustion characteristics using multiphase flamelet combustion - صفحه:1013-1021 numerical investigation on the three-dimensional flowfield in the single expansion ramp nozzle with passive cavity flow control - صفحه:1115-1126 numerical simulation of flow around a high-speed train subjected to different windbreak walls and yaw angles - صفحه:1137-1149 numerical simulation of flow behind vortex generators - صفحه:1047-1061 optimization of the pool boiling heat transfer in the region of the isolated bubbles using the abc algorithm - صفحه:1241-1248 simulation and modeling for aging and particle shape effect on airflow dynamics and filtration efficiency of human lung - صفحه:1273-1285 simulation of dipole vorticity dynamics colliding viscous boundary layer at high reynolds numbers - صفحه:1073-1081 study of droplet impact on a wall using a sharp interface method and different contact line models - صفحه:1001-1012 theoretical, numerical and experimental investigation of vortex shedding in a novel sub-scaled motor - صفحه:1319-1332 towards methodologies for optimal fluid networks design - صفحه:1223-1229