|
|
طراحی و ساخت لایه های نازک مجسمه سازی شده مارپیچی شکل سولفید روی و بررسی خواص آنتی باکتریایی این سطوح متخلخل
|
|
|
|
|
نویسنده
|
عبدی فاطمه ,کیا سولماز
|
منبع
|
مهندسي متالورژي - 1400 - دوره : 24 - شماره : 1 - صفحه:42 -49
|
چکیده
|
ساختار های مار پیچی شکل سولفید روی با تعداد پیچ های مختلف با استفاده از لایه نشانی خراشی روی زیر لایه شیشه ای تشکیل شدند. خواص ساختاری این لایه های نازک مجسمه سازی شده با استفاده از طیف پراش اشعه ایکی مطالعه شد. سطح مقطع ساختار های مارپیچی با استفاده از تصاویر میکروسکوپی الکترون روبشی مشاهده گردید. مورفولوژی سطحی و اندازه دانه های لایه های نازک بدست آمده با استفاده از تصاویر میکروسکوپ نیروی اتمی بررسی شد و درصد تخلخل سطحی نمونه ها بدست آمد. خواص آنتی باکتریایی برای دو نوع باکتری در دو حالت بدون نور و تحت تابش نور بررسی شد. نتایج نشان دادند که لایه های نازک مجسمه سازی شده سولفید روی دارای خاصیت آنتی باکتریایی هستند و با افزایش تخلخل این ساختار ها خاصیت آنتی باکتریایی افزایش پیدا می کند. علت این افزایش به افزایش سطح مقطع درمعرض تماس نسبت داده شد. همچنین مشخص شد که تحت تابش نور فرابنفش سری الف این خاصیت آنتی باکتریایی بهبود می یابد.
|
کلیدواژه
|
لایه های نازک مجسمه سازی شده، سولفید روی، تخلخل، آنتی باکتریال
|
آدرس
|
دانشگاه محقق اردبیلی, دانشکده فن آوری های نوین, گروه علوم مهندسی, ایران, دانشگاه محقق اردبیلی, دانشکده فن آوری های نوین, گروه علوم مهندسی, ایران
|
پست الکترونیکی
|
s.kia@uma.ac.ir
|
|
|
|
|
|
|
|
|
designing and fabrication of zinc sulfide helical shape sculptured thin films and study of antibacterial properties of these porous structures
|
|
|
Authors
|
abdi fatemeh ,kia solmaz
|
Abstract
|
zinc sulfide helix sculptured structures with different number of 1, 3 and 5 pitches were formed on the glass substrate using glancing angle deposition method. the structural properties of these sculptured thin films were studied using x ray diffraction pattern (xrd). the cross section of the helical structures was observed using field emission scanning electron microscopic images (fesem). the surface morphology and grain size of the obtained thin films were examined using atomic force microscope images (afm) and the percentage of surface porosity of the samples was obtained. antibacterial properties were investigated for two types of bacteria in both under light and no-light conditions. the results showed that the zinc sulfide sculptured helical thin films have antibacterial properties and with increasing the porosity of these structures, the antibacterial properties increase. the increase in antibacterial properties with increasing porosity was attributed to the greater cross-sectional area of contact with bacteria. it was also found that the antibacterial properties of these structures improve under light radiation
|
|
|
|
|
|
|
|
|
|
|
|
|