>
Fa   |   Ar   |   En
   تاثیر عنصر هافنیم به مقدار کم بر رفتار استحاله و خواص سوپرالاستیک آلیاژ حافظه دارNiti غنی از نیکل  
   
نویسنده حسینی نورآبادی سپیده سادات ,نیلی احمدآبادی محمود
منبع مهندسي متالورژي - 1398 - دوره : 22 - شماره : 3 - صفحه:168 -177
چکیده    آلیاژهای حافظه دار نیکل-تیتانیم به دلیل دارا بودن دو خاصیت ویژه ی حافظه داری و سوپرالاستیک بسیار مورد توجه قرار گرفته و کاربردهای گسترده‌ای در صنایع مختلف مانند پزشکی، هوافضا و به عنوان حسگر در سیستم های میکرو الکترو مکانیکی پیدا کرده اند. رفتار حافظه‌داری و سوپرالاستیک به شدت وابسته به ترکیب شیمیایی، دما و ساختار آلیاژ می‌باشد. در این پژوهش برای اولین بار تاثیر عنصر هافنیم به مقدار کم ( حدود 3 درصد اتمی) بر روی ریزساختار، دماهای استحاله، خواص حافظه داری و خواص سوپرالاستیک آلیاژ نیکل تیتانیم با ترکیب اسمی ni-47/2%at.ti-3%at.hf بررسی گردیده است. نتایج نشان می دهند که حضور هافنیم می تواند مکانیسم تغییر شکل حین بارگذاری را تغییر دهد و در نتیجه منجر به بروز رفتار حافظه داری دو طرفه در نمونه می گردد. رفتار حافظه داری دو طرفه در این نمونه تنها پس از 12 درصد کشش ساده دیده شد. نمونه پس از باربرداری، حین بازیابی حرارتی از خود رفتاری زنگوله ای نشان می دهد.
کلیدواژه آلیاژ نیکل-تیتانیم-هافنیم، حافظه داری، سوپرالاستیسیته، هافنیم، میکروآلیاژسازی
آدرس دانشگاه تهران, دانشکده مهندسی متالورژی و مواد, پردیس دانشکده‌, ایران, دانشگاه تهران, دانشکده مهندسی متالورژی و مواد, پردیس دانشکده‌, ایران
پست الکترونیکی nili@ut.ac.ir
 
   Influence of Hf Solute Addition on the Shape Memory and Superelastic Behavior of NiTi Alloy  
   
Authors Nili-Ahmadabadi Mahmoud ,Hosseini Noorabadi Sepideh Sadat
Abstract    NiTi alloys (SMAs) are unique alloys, which have two attractive properties, shape memory effect and superelastic behaviour. Each property strongly depends on the composition, temperature and structure. The microstructure was investigated by optical microscopy, and chemical composition was analyzed using line scan analysis with energy dispersive Xray spectroscopy. Xray Diffraction (XRD) analysis of the bulk samples was conducted. The transformation temperatures were measured by Dilatometry. The shape memory and superelastic behavior of material were investigated using loadingunloading test and insitu thermal cycling by applying electrical current at the end of sample and the shape changes of the bilayers were recorded using a digital camera. The solute addition of Hf to NiTi alloy, led to a Twoway shape memory effect after tensile deformation. The Hf solute additions on NiTi alloy provides bellcurve shape memory behaviour during stressfree thermal cycling after 12 percent tensile deformation which demonstrates the acute influence of Hf additions on the material’s properties.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved