>
Fa   |   Ar   |   En
   استخراج و اندازه‌گیری مقادیرکم سرب از محلول‌های آبی با استفاده از روش استخراج بخار گاز آلی مایع  
   
نویسنده رسولی گرمارودی سمیه ,نیلچی عبدالرضا ,یافتیان محمد رضا ,رفیعی جواد
منبع مهندسي شيمي ايران - 1401 - دوره : 21 - شماره : 122 - صفحه:77 -87
چکیده    در این پژوهش روشی کارآمد، نسبتاً ساده و سریع مبتنی بر استخراج بخار گاز آلی مایع (ogsle) برای استخراج و اندازه گیرى مقادیر کم سرب در محلول‌های آبی ارائه شد. بدین منظور عامل کمپلکس‌ کنندۀ آمونیوم پیرولیدین‌دى‌تیوکاربامات (apdc) و حلال استخراج‌ کنندۀ متیل‌ایزوبوتیل استفاده شد. هم‌چنین اثر مشخصه‌های موثر بر میزان استخراج نظیر حجم حلال آلی، نسبت مولی عامل استخراج‌کننده نسبت‌به فلز سرب، ph فاز آبی، زمان استخراج و دمای محفظۀ گرمایش بررسی شد. تعیین تعداد آزمایش های تجربی، تجزیه و تحلیل آماری داده ها و بهینه‌کردن شرایط استخراج یون سرب با به‌کارگیری طرح مرکب مرکزی  (ccd)و روش سطح پاسخ  (rsm)انجام شد. در شرایط بهینه حد تشخیص (lod) و حد کمی‌بودن روش (loq) به‌ترتیب 0.13 و 0.43 میکروگرم بر لیتر، انحراف استاندارد نسبی 3.7درصد است و منحنی تجزیه ای در محدودۀ 0.5تا 10میکروگرم بر لیتر خطی است.
کلیدواژه پیش ‌تغلیظ سرب، استخراج بخار گاز آلی مایع، پیش‌ تغلیظ، طراحی آزمایش، آمونیوم پیرولیدین‌دى‌تیوکاربامات
آدرس دانشگاه زنجان, ایران. پژوهشگاه علوم و فنون هسته ای, ایران, پژوهشگاه علوم و فنون هسته‌ای, ایران, دانشگاه زنجان, ایران, پژوهشگاه علوم و فنون هسته‌ای, ایران
پست الکترونیکی jrafie@aeoi.org.ir
 
   extraction and determination of trace amounts of lead in aqueous solutions by organic gas steam liquid extraction (ogs-le)  
   
Authors rasouli garmarodi somayeh ,nilchi abdolreza ,yaftian mohammad reza ,rafiei javad
Abstract    in this study an efficient, relatively simple and fast method based on the extraction of organic gas steam liquid extraction (ogsle) was presented for extraction and determination of trace amounts of lead in aqueous solutions. for this purpose, ammonium pyrrolidine dithiocarbamate (apdc) as a complexing agent and methyl isobutyl ketone (mibk) as extracting solvent was used, also, the effect of parameters on the extraction recovery such as the volume of organic solvent, the molar ratio of the extracting agent relative to lead metal, the ph of the aqueous phase, the extraction time and the temperature of the heating chamber were investigated. determination of number of experiments, statistical analysis of data and optimization of lead ion extraction were performed using central composite design (ccd) and response surface methodology (rsm).under optimal conditions, the limit of detection (lod) and limit of quantification of the method (loq) are 0.13 μgl−1 and 0.43 μgl−1, respectively, the relative standard deviation is 3.7 percent and the analysis curve is linear in the range of 0.5 to 10 μgl−1.
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved