>
Fa   |   Ar   |   En
   Investigations on the cutting parameters and the tool wear of SAE 1030 forged steel material by acoustic emission in turning operation [SAE 1030 çelik dövme malzemenin tornalama işleminde kesme parametrelerinin ve takim aşinmasinin akustik olarak incelenmesi]  
   
نویسنده yaman k. ,başaltin m.
منبع journal of the faculty of engineering and architecture of gazi university - 2017 - دوره : 32 - شماره : 4 - صفحه:1077 -1088
چکیده    In this work,the relation of the tool wear and machining parameters with the acoustic emission (ae) signals are investigated. sae 1030 forged steel workpart is subjected to the machining to determine the effective machining parameters namely,cutting speed and feed rate. the experiments are performed for 1.5 mm constant depth of cut in a cnc type turning machine by using 130,140,150 m/min cutting speed and 0.15,0.20,0.30 mm/rev feed rate. the suitable cutting speed and feed rate is determined as 140 m/min and 0,20 mm/rev respectively. the ae responds of the tool wear are analyzed for machining time of 5,10,15 and 20 minute separately for two different type carbide tool inserts (ic8250,ic9250) by using the decided cutting parameters. the results show that,the ae values increase with increasing the flank wear (vb). it is observed finally that the relationship between the tool wear and ae is strong and the tool wear can be monitored by using the ae signals. the wear models of the cutting tools have been derived in the final section.
کلیدواژه Acoustic emission; Cutting parameters; Sound analysis; Surface roghness; Tool wear
آدرس torkiye bilimsel ve teknik arastirma kurumu savunma arastirma gelistirme enstitoso,ankara, Turkey, torkiye bilimsel ve teknik arastirma kurumu savunma arastirma gelistirme enstitoso,ankara,turkey,gazi üniversitesi,fen bilimleri enstitösö,teknik eǧitim faköltesi makine eǧitimi bölömö,ankara, Turkey
 
     
   
Authors
  
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved