>
Fa   |   Ar   |   En
   اثر قطر الیاف بر تراوایی بخار آب و خواص ضدآب و ضدباد غشای الکتروریسی‌شده پلی(‌وینیلیدن ‌فلوئورید)  
   
نویسنده امینی گلچهر ,کریمی محمد ,زکایی آشتیانی فرزین
منبع علوم و تكنولوژي پليمر - 1398 - دوره : 32 - شماره : 6 - صفحه:485 -495
چکیده    فرضیه: غشاهای ضدآب تنفسی در بسیاری از زمینه‌ها از جمله منسوجات محافظ و بیمارستانی و پوشاک ورزشی کاربرد دارند. تنفس‌پذیری، عامل مهمی در راحتی پوشاک است. روش‌ها: در این پژوهش، اثر قطر الیاف بر تنفس‌پذیری و خواص ضدآب و ضدباد غشای پلی‌‌(وینیلیدن فلوئورید) بررسی شد. از این رو، غشاهای شامل الیاف با قطرهای 123، 203، 551 و nm 1018 به‌کمک فرایند الکتروریسی تولید شدند. تلاش شد تا از دی‌متیل سولفوکسید به عنوان حلال سبز در این فرایند استفاده شود. درصد تخلخل، اندازه منفذها، زاویه تماس قطره آب، نفوذپذیری هوا و فشار هیدروستاتیک نمونه‌ها اندازه‌گیری و ارزیابی شد. تراوایی بخار آب نمونه‌ها با روش گرماوزن‌سنجی بررسی شد.یافته‌ها: فشار هیدروستاتیک نمونه‌ها با کاهش قطر الیاف (از nm 1018 به nm 133) و در نتیجه آن کاهش اندازه منافذ غشا، به‌ترتیب از kpa 10 به kpa 100 افزایش یافت. نفوذپذیری هوای نمونه‌ها نیز با کاهش قطرالیاف، از ml/s.cm2 9 تا ml/s.cm2 1.4 در افت فشار kpa 500، کم شد. نتایج بیانگر این است که غشاهای تولیدشده با الیاف ظریف‌تر خواص ضدآب و ضدباد بهتری را نشان می‌دهند. درحالی‌ که کاهش قطر الیاف و در نتیجه آن کاهش اندازه منفذهای موجود در غشا به کاهش تنفس‌پذیری لایه منجر نشده و مقدار تراوایی بخار آب حدود kg/m2.day 12.7 باقی مانده ‌است. بنابراین به‌نظر می‌رسد، سازوکار غالب نفوذ بخار آب در این محدوده از اندازه منفذ (nm 761 تا nm 3860)، نفوذ مولکولی و مستقل از اندازه قطر الیاف در غشاست.
کلیدواژه پوشاک محافظ، ضدآب، ضدباد، تنفسی، غشای الکتروریسی‌شده
آدرس دانشگاه صنعتی امیرکبیر, دانشکده مهندسی نساجی, گروه مستقل نانوتکنولوژی, ایران. دانشگاه صنعتی امیرکبیر, گروه مستقل نانوتکنولوژی, ایران, دانشگاه صنعتی امیرکبیر, دانشکده مهندسی نساجی, ایران, دانشگاه صنعتی امیرکبیر, دانشکده مهندسی شیمی, ایران
 
   The Influence of Fibers Diameter on Water Vapor Permeability, Waterproof and Windproof Properties of Electrospun Poly(vinylidene fluoride) Membrane  
   
Authors Amini Golchehr ,Karimi Mohammad ,Zokaee Ashtiani Farzin
Abstract    Hypothesis: Waterproof breathable membranes are used in different fields such as protective clothing, hospital textiles and sport wears. Breathability is an important factor in clothing comfort.Methods: The influence of fiber diameter on breathability, waterproof and windproof properties of poly(vinylidene fluoride) membrane was investigated in this study. Hence, membranes composed of fiber with diameters of 133, 203, 551 and 1018 nm were produced through electrospinning process. It was attempted to use dimethyl sulfoxide as a green solvent in this process. Porosity, pore size, water contact angle, air permeability and hydrostatic pressure of the membranes were assessed. Thermogravimetric analysis (TGA) was employed to measure the water vapor permeability of the membranes. Findings: The hydrostatic pressure of the membranes increased from 10 kPa to 100 kPa by reducing the fibers’ diameter (from 1018 nm to 133 nm) and subsequently the pores size of the membranes. The air permeability of the samples decreased from 9 mL/s.cm2 to 1.4 mL/s.cm2 (at pressure drop of 500 Pa) with decreasing fiber diameter. The results showed that the membranes composed of finer fibers have better waterproof and windproof properties. This is while the reduction in fiber diameter and subsequently reduction in the pore size have not led to reduction in the breathability, and the amount of water vapor permeability remained approximately 12.7 kg/m2.day. Hence, it seems that the ordinary diffusion (molecular diffusion) is the dominant mechanism of water vapor diffusion in pore size ranging from 761 nm to 3860 nm and it is independent of the fiber diameter in the membranes
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved