|
|
استخراج آبی روغن از دانه بزرک و بررسی پایداری و ویژگی های فیزیکی شیمیایی آن در طی نگهداری
|
|
|
|
|
نویسنده
|
صنعتی آگاه مینا ,آزادمرد دمیرچی صدیف ,بدبدک صمد ,فتحی آچاچلوئی بهرام
|
منبع
|
علوم و صنايع غذايي ايران - 1402 - دوره : 20 - شماره : 144 - صفحه:48 -62
|
چکیده
|
هدف از این تحقیق، بررسی فرآیند استخراج آبی به عنوان یک روش ایمن و دوستدار محیط زیست جهت استخراج روغن از دانه بزرک است. برای این منظور، دانه بزرک ابتدا برشته (تحت دمای 120 درجه سلسیوس به مدت 45 دقیقه)، سپس آسیاب شده و فرایند استخراج آبی انجام شد. در فرایند استخراج آبی شرایط دما (70-25 درجه سانتیگراد)، زمان (4.5-1.5 ساعت) و ph (4-7) اعمال شد و ویژگیهای کیفی (عدد اسیدی، عدد پروکسید و بازده استخراج روغن) اندازهگیری شد. نتایج نشان داد که با افزایش هر یک از پارامترهای زمان استخراج و دمای استخراج، بازده روغن بدست آمده نیز افرایش مییابد، بطوریکه بیشترین میزان بازده مربوط به زمان استخراج 3 ساعت، دمای استخراج 70 درجه سلسیوس و 4= phبود. همچنین عدد اسیدی و پروکسید روغن نیز با بالا رفتن پارامترهای زمان استخراج و دمای استخراج افزایش یافت. روغن استخراج شده در دمای 70 درجه سلسیوس، زمان 2.45 ساعت و 4=ph با توجه به نتایج حاصل از اندازهگیری عدد اسیدی، عدد پروکسید و بازده استخراج با استفاده از نرم افزار دیزاین اکسپرت (design expert) بعنوان تیمار بهینه انتخاب شد و آزمونهای کیفی در طول نگهداری در 60 روز بر روی آن انجام گرفت. در طول نگهداری روغن، میزان کلروفیل، کارتنوئید و محتوی فنل کل کاهش معنیداری (0.05≥p) داشت. همچنین عدد اسیدی و پروکسید طی زمان افزایش معنیداری (0.05≥p) نشان دادند.
|
کلیدواژه
|
استخراج آبی، بازده روغن، دانه بزرک، ویژگیهای کیفی
|
آدرس
|
دانشگاه تبریز, دانشکده کشاورزی, ایران, دانشگاه تبریز, دانشکده کشاورزی, گروه علوم و مهندسی صنایع غذایی, ایران, دانشگاه تبریز, دانشکده کشاورزی اهر, گروه علوم و مهندسی صنایع غذایی, ایران, دانشگاه محقق اردبیلی, دانشکده کشاورزی, گروه علوم و مهندسی صنایع غذایی, ایران
|
پست الکترونیکی
|
bahram1356@yahoo.com
|
|
|
|
|
|
|
|
|
aqueous extraction of oil from flaxseed and evaluation of its storage stability and physicochemical properties during storage
|
|
|
Authors
|
sanati agah mina ,azadmard-damirchi sodeif ,bodbodak samad ,fathi-achachlouei bahram
|
Abstract
|
the aim of this study is to investigate aqueous extraction process as a safe and environmentally friendly method for extracting oil from flaxseed. for this purpose, flaxseeds were first roasted (at 120 °c for 45 minutes), then ground and the extraction process was performed. in the aqueous extraction process, temperature (25-70 ° c), time (1.5-5.5 hours) and ph (4-7) conditions were applied and qualitative characteristics (acid value, peroxide value and oil extraction yield) were measured. the results showed that, with increasing extraction time and temperature, the obtained oil yield also increased, so that the maximum yield related to extraction time of 3 hours, extraction temperature of 70 °c and ph=4. also acid and peroxide values increased by increase of the extraction time and temperature. according to the results of the acid value, peroxide value and extraction oil yield, extraction at 70 °c, 2.45 h and ph=4 was selected as the optimal treatment and quality characteristics of the extracted oil was evaluated during storage. the results showed that, chlorophyll, carotenoids and total phenol content significantly decreased (p≤0.05) during storagemouseout=msocommenthide(’_com_1’) onmouseover=msocommentshow(’_anchor_1’,’_com_1’)>[u1] . also, acid and peroxide values had a significant increase during storage (p≤0.05) and the maximum observed at 60th day storage. it was concluded that aqueous extraction of oil from flaxseed despite its relatively low efficiency, improved quality characteristics and can be a good alternative to conventional methods.mouseout=msocommenthide(’_com_1’) onmouseover=msocommentshow(’_anchor_1’,’_com_1’)> [u1]q7
|
Keywords
|
aqueous extraction ,flaxseed ,oil yield ,quality characteristics
|
|
|
|
|
|
|
|
|
|
|