|
|
اثر پوششدهی با صمغهای دانه مرو، دانه ریحان و گزانتان بر خصوصیات ظاهری برشهای خشکشده میوه “به”
|
|
|
|
|
نویسنده
|
صالحی فخرالدین ,عظیمی سلیم شمیمه
|
منبع
|
علوم و صنايع غذايي ايران - 1400 - دوره : 18 - شماره : 118 - صفحه:55 -65
|
چکیده
|
پوششدهی میوهها با استفاده از صمغهای خوراکی باعث افزایش کیفیت ظاهری، بهبود رنگ و کاهش چروکیدگی آنها در انتهای فرآیند خشککردن میگردد. هدف از این پژوهش، بررسی اثر پوششدهی با صمغهای دانه مرو، دانه ریحان و گزانتان بر خصوصیات ظاهری برشهای خشکشده میوه ldquo;به rdquo; در سامانه فروسرخ بود. در این پژوهش برشهای میوه ldquo;به rdquo; با ضخامت 0.5 سانتیمتر با استفاده از صمغهای دانه مرو، دانه ریحان و گزانتان (غلظت 1 درصد) پوششدهی شدند و سپس درون خشککن فروسرخ قرار گرفته و اثرات توان پرتودهی (250 و 375 وات) بر ویژگیهای ظاهری آنها بررسی شد. برای مدلسازی مولفه تغییرات رنگ نیز از مدلهای توانی، درجه دوم، گومپرتز، لجستیک، ریچارد، اماماف و ویبول استفاده شد. مولفههای رنگی شامل روشنایی، قرمزی، زردی و تغییرات رنگ و همچنین چروکیدگی سطحی نمونهها در طی زمان خشککردن بررسی شد. مولفه روشنایی محاسبه شده برای فرآیند خشک شدن نمونههای میوه ldquo;به rdquo; نشان داد که از نظر روشنایی نمونههای پوشش داده شده با صمغ دانه مرو روشنتر بودند. از نظر مولفه تغییرات رنگ نیز، برشهای ldquo;به rdquo; پوشش داده شده با صمغ دانه مرو کمترین تغییرات رنگ را در طی زمان خشککردن از خود نشان دادند و میانگین مقادیر این مولفه برای نمونه بودن پوشش و پوشش داده شده با صمغهای دانه مرو، دانه ریحان و گزانتان به ترتیب برابر 35.09، 20.20، 43.40 و 28.33 بود (توان 250 وات). برای مدلسازی مولفه تغییرات رنگ، مدل اماماف در مقایسه با سایر مدلها خطای کمتری داشت. نتایج نشان داد که پوششدهی با صمغ دانه مرو باعث حفظ شکل ظاهری محصول خشکشده گردید و همچنین کمترین چروکیدگی در کل زمان خشک شدن و در توانهای مختلف پرتودهی در نمونههای پوشش داده شده با این صمغ مشاهده شد.
|
کلیدواژه
|
چروکیدگی، خشککن فروسرخ، مدلسازی، مولفههای رنگی
|
آدرس
|
دانشگاه بوعلی سینا, دانشکده کشاورزی, ایران, دانشگاه علوم پزشکی کرمانشاه, دانشکده تغذیه و صنایع غذایی, گروه علوم و صنایع غذایی, ایران
|
|
|
|
|
|
|
|
|
|
|
Effect of coatings with wild sage seed, basil seed and xanthan gums on the appearance characteristics of dried quince slices
|
|
|
Authors
|
Salehi Fakhreddin ,Azimi Salim Shamimeh
|
Abstract
|
Coating the fruits using edible gums increases the appearance quality, improves the color and reduces their shrinkage at the end of the drying process. The purpose of this study was to investigate the effect of coating with wild sage seed, basil seed and xanthan gums on the appearance characteristics of dried quince slices in the infrared system. In this study, quince slices with a thickness of 0.5 cm were coated using wild sage seed, basil seed and xanthan gums (concentration of 1%) and then placed in an infrared dryer and the effects of radiation power (250 and 375 W) on the appearance characteristics were examined. Also, for modeling the color change index, the Power, Quadratic, Gompertz, Logistic, Richards, MMF, and Weibull models were used. Color indexes including lightness, redness, yellowness and color changes as well as changes in the samples area during drying time were examined. The calculated lightness index for the drying process of quince samples showed that the coated samples with wild sage seed gum were brighter. In terms of color change index, coated quince slices with wild sage seed gum showed the lowest color changes during drying time and the average values of this index for the uncoated sample, coated with wild sage seed, basil seed and xanthan gums were equal to 35.09, 20.20, 43.40 and 28.33, respectively (250 W). For modeling the color change index, the MMF model had less error than the others models. The results showed that the coating with wild sage seed gum maintained the appearance of the dried product and also the least shrinkage in the drying duration and at different radiation powers were observed in these coated samples.
|
Keywords
|
Color indexes ,Infrared dryer ,Modeling ,Shrinkage
|
|
|
|
|
|
|
|
|
|
|