>
Fa   |   Ar   |   En
   ارزیابی تولید سوخت بیودیزل از میکروجلبک در یک فتوبیوراکتور و تعیین برخی از خواص فیزیکی و شیمیایی آن  
   
نویسنده موذنی طیبه ,صدرنیا مریم ,حاجی حسینی رضا
منبع مجله علمي شيلات ايران - 1399 - دوره : 29 - شماره : 1 - صفحه:71 -80
چکیده    بیودیزل متیل استر یا اتیل استر روغن های طبیعی می باشد که شباهت زیادی به گازوئیل دارد و می‌تواند به عنوان یک سوخت جایگزین در موتورهای دیزل استفاده شود. دراین تحقیق تولید بیودیزل از میکروجلبک در یک فتوبیوراکتور و برخی خواص فیزیکی و شیمیایی آن مورد بررسی قرار گرفت. در این پژوهش مخلوط میکروجلبک کشت داده شده از آب راکد، در یک فتوبیوراکتور در دو شدت نور 8000 و 16000 لوکس پرورش و میزان بیومس تولید شده مقایسه شد. بیومس تولیدی از نور 8000 لوکس پس از جداسازی و خشک شدن تحت فرایند ترانس استریفیکاسیون مستقیم قرارگرفته و بیودیزل تولید گردید. آنالیز پروفایل اسیدهای چرب تشکیل دهنده بیودیزل با استفاده از gc/ms تعیین گردید. برخی از خصوصیات بیودیزل تولید شده نظیر چگالی، نقطه ابری شدن، نقطه ریزش و نقطه انجماد مورد مطالعه قرار گرفت. حداکثر نرخ رشد ویژه در شدت نور8000 لوکس 0.7 (در روز) و در شدت نور16000 لوکس 0.59 (در روز) بود. علاوه بر این، ‌زمان دو برابر شدن سلول ها و میزان تولید بیومس در شدت نور 8000 لوکس نسبت به شدت نور 16000 لوکس برتری داشت. نتایج gc/ms نشان داد که 57.59 درصد وزن خشک میکروجلبک متشکل از انواع لیپید بوده و بیودیزل حاصل از ترانس استریفیکاسیون آن، حاوی 50.31 % اسید چرب اشباع و 49.69% اسید چرب غیراشباع بود. اسیدهای چرب اشباع پالمیتیک (c16:0) با 39.16%، اسیداستئاریک (c18:0) 9.65%، اسیدآراشیدیک (c20:0) 0.79%، اسید مارژریک (c17:0)0.71% و اسیدهای چرب غیراشباع لینولئیک(c18:2) با 27.40 درصد، اسیداولئیک (c18:1) با 20.04 و اسید پالمیتولئیک (c16:1) 2.25 درصد بیودیزل تولیدی را تشکیل دادند. چگالی بیودیزل تولید شده برابر با 0.853 گرم بر سانتیمتر مکعب و نقطه ابری شدن و نقطه ریزش آن 3-و 10- درجه سانتی‌گراد بود. نتایج تحقیق نشان داد که امکان کشت میکروجلبک در فتوبیوراکتور با به حداقل رساندن هزینه و زمان وجود دارد. همچنین پروفایل اسیدهای چرب و خواص فیزیکی بیودیزل تولید شده، حاکی از آن بود که بیودیزل حاصل از میکروجلبک دارای کیفیت بالایی بوده و روش تبادل استری مستقیم می‌تواند گزینه مناسبی جهت تولید بیودیزل، نسبت به سایر روش‌ها باشد.
کلیدواژه بیودیزل، میکروجلبک، فتوبیوراکتور
آدرس دانشگاه پیام نور مرکز تهران, گروه زیست شناسی, ایران, دانشگاه پیام نور مرکز تهران, گروه زیست شناسی, ایران, , ایران
 
   Evaluation of biodiesel production from micro-algae in a photobioreactor and study of its physical and chemical properties  
   
Authors Moazzeni tayebeh ,sadrnia maryam ,Hajihosseini reza
Abstract    Biodiesel methyl ester or ethyl ester is a natural oil that is very similar to diesel and can be used as an alternative fuel for diesel engines. Microalgae are able to produce and store high amounts of lipids. In this research, the production of biodiesel fuel from microalgae was investigated in a biofilm and some of its physical and chemical properties were determined.this study, a mixture of microalgae cultured from stagnant water was compared in a photobioreactor at two light intensities of 8000 and 16000 lux and the amount of biomass produced. The biomass produced under the light intensity of 8000 lux after isolation and drying was subjected to a direct transesterification process and biodiesel was produced.Analysis of biodiesel constituents of fatty acids was determined using GC / MS. Some biodiesel characteristics, such as density, cloudy point, spin point, and freezing point, were also studied. The light intensity of 8000 lux was superior to the magnitude of doubling of cells, specific growth rate and biomass production compared to 16000 lux light intensity, and was used to produce microalgae biomass. The results of GC / MS showed that biodiesel resulting from transesterification of lipid microalgae contained 50. 31% saturated fatty acid and 49.69% unsaturated fatty acid. Pallic acid saturated fatty acids (C16: 0) with 39.16%, acetatanic acid (C18: 0), 65.6%, arachidic acid (0.72% C20: 0%), margaric acid (0.17% C17: 0%) and acids The unsaturated linoleic fat (C18: 2) with 27.47%, acidulic acid (C18: 1) with 20.04 and palmitoleic acid (C16: 1) formed 25.2% biodiesel. The produced biodiesel was 0.853 g / cm3 and the cloud was cloudy and its dropping point was 3 and 10 ° C.The results of the study showed that the microalgae culture in the photobiovert can be minimized by minimizing the cost and time. Also, fatty acid profiles and biodiesel physical properties indicated that the microalgae biodiesel was of high quality and direct steadystate exchange could be a good option for producing biodiesel, as compared to other methods.
Keywords Biodiesel ,Microalgae ,Photobioreactor
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved