>
Fa   |   Ar   |   En
   بررسی تاثیر استفاده از روش حرارتی- بیولوژیکی در خط برگشت لجن بر روی پارامترهای بیوسنتیکی فرایند لجن فعال و میزان لجن مازاد تولیدی  
   
نویسنده بنی سعید نعیم ,تکدستان افشین ,چراغی محبوبه ,افروس علی ,جلیل زاده رضا
منبع آب و فاضلاب - 1403 - دوره : 35 - شماره : 3 - صفحه:89 -103
چکیده    حجم لجن تولیدی و خصوصیات آن بستگی به دو مشخصه کمّی و کیفی فاضلاب، فرایند تصفیه و نیز شرایط بهره‌برداری دارد. تولید نسبتاً بالای لجن بیولوژیکی مازاد به‌عنوان یکی از اشکالات اصلی فرایندهای هوازی مورد استفاده در تصفیه بیولوژیکی فاضلاب به حساب می‌آید. این پژوهش در تصفیه‌خانه صنعتی موجود کارخانه قند پارس شیراز با ظرفیت 5 مترمکعب در روز انجام شد. در این پژوهش، اثرات تغییرات دما در تانک آنوکسیک و در خط برگشت به‌منظور افزایش حذف بیولوژیکی لجن، کاهش لجن مازاد بیولوژیکی و همچنین تاثیرات تغییر دما بر روی پارامترهای بیوسنتیکی در سیستم لجن فعال بررسی شد. میانگین مقدار به‌دست آمده ضریب تولید بیومس (y) یا بازده رشد در بازه 100 روزه مطالعاتی پس از رسیدن راکتور بیولوژیکی به‌حالت پایدار به‌طور میانگین در شرایط وضعیت موجود از 0.75 به 0.54 در دمای لجن برگشتی 40 درجه سلسیوس و به 0.38 در دمای 50 درجه سلسیوس و 0.30 در دمای 60 درجه سلسیوس برحسب gmlss/gcod رسیده است. این پژوهش نشان داد که هر چند با افزایش دمای لجن برگشتی ضریب تولید بیومس کاهش می‌یابد، ولی بر کیفیت خروجی پساب از نظر کیفیت و پارامترهای بیوسنتیکی نیز تاثیر منفی می‌گذارد. نتایج پژوهش نشان داد که بیوراکتور متعارف موجود، با تغییر در دمای لجن برگشتی در دمای 40 درجه سلسیوس به مراتب بازدهی بالاتری در موارد حذف آلاینده‌ها، محدوده متعارف پارامترهای بیوسنتیکی، کاهش میزان ضریب تولید لجن و لجن مازاد دفعی دارد.
کلیدواژه لجن فعال، کاهش لجن مازاد، روش حرارتی بیولوژیکی، پارامترهای بیوسنتیکی، برگشت لجن
آدرس دانشگاه آزاد اسلامی واحد اهواز, ایران, دانشگاه علوم پزشکی جندی شاپور, مرکز تحقیقات فناوری‌های زیست‌محیطی, ایران, دانشگاه آزاد اسلامی واحد اهواز, گروه مهندسی محیط‌زیست, ایران, دانشگاه آزاد اسلامی واحد اهواز, گروه مهندسی آب, ایران, دانشگاه آزاد اسلامی واحد اهواز, گروه مهندسی محیط‌زیست, ایران
پست الکترونیکی rahma.reza@gmail.com
 
   investigation of the use of the thermo-biological method in the return sludge line on the biokinetics of the activated sludge process and the amount of excess sludge produced  
   
Authors banisaeid naeim ,takdastan afshin ,cheraghi mahboobeh ,afrous ali ,jalilzadeh yengejeh reaz
Abstract    the volume of produced sludge and its characteristics depend on the quantitative and qualitative characteristics of wastewater, the treatment process, and the operating conditions. relatively high production of excess biological sludge is considered one of the main drawbacks of aerobic processes used in biological wastewater treatment. this research was conducted in the existing industrial treatment plant of pars shiraz sugar factory with a capacity of 5 cubic meters per day. in this research, the effects of temperature changes in the anoxic tank and return line were investigated to increase the biological removal of sludge, reduce the excess biological sludge; also, the effects of temperature changes on the biokinetics parameters in the activated sludge system were analyzed. the average values of the biomass production coefficient (y) or growth efficiency in the 100-days study period, after the biological reactor reaches a stable state, varied from 0.75 to 0.54 at the return sludge temperature of 40 °c, decreasing to 0.38 at 50 °c and 0.30 at 60 °c in terms of (gmlss/gcod). this research demonstrated that while the biomass production coefficient decreases with the increasing return sludge temperature, it also has a negative impact on the quality of the effluent with respect to both quality and biokinetics parameters. the results indicated that the existing conventional bioreactor, with the return sludge temperature of 40 °c, achieves a significantly higher efficiency in removing pollutants, maintainingconventional range of biokinetics parameters, reducing the amount of sludge production coefficient and excess sludge disposal.
Keywords activated sludge ,excess sludge reduction ,thermo-biological method ,biokinetic parameters ,return sludge
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved