>
Fa   |   Ar   |   En
   Estimation of Producer Gas from Low-grade Coal and Biomass Using Mathematical Modelling  
   
نویسنده Hussain S. ,Akhtar N. A. ,Shahzad K. ,Saleem M. ,Awan N. A. ,Kalru M. A. A.
منبع journal of faculty of engineering and technology - 2016 - دوره : 23 - شماره : 1 - صفحه:99 -110
چکیده    Sustainable energy and reduction in greenhouse gases (ghg) are the challenging issues of the world. due to the increase in globing warming concern, the industrial world has already reduced the use of fossil fuels to the status of minimal source of energy. biomass is now believed to be an economically competitive with the fossil fuels, which can be subsequently used for the production of producer or syngas using appropriate technology of thermal conversion. the low energy contents of biomass are compensated by blending with a higher energy content coal. the major objective of this study is to better understand the effect of temperature change on the producer gas composition in circulating fluidized bed gasifier (cfbg). primarily the current work is experimental, but supplemented by the mathematical modeling that explains different steps in terms of existing scientific knowledge. the validation results showed that the model predicted the molar ratio of h2/co in the producer gas in the range 0.97, 0.96, 0.93, 2 0.92, 0.927 and the measured values 0.83, 0.79, 0.78, 0.73 and 0.74 at temperature degree (°c) 750, 800, 820, 850 and 875 respectively. similarly the molar ratio of co/co2 predicted by the model was; 0.81, 0.84, 0.86, 0.89 and 0.85 against the experimental molar ratio 0.86, 0.91, 0.75, 0.66 and 0.59 respectively at fixed feed and er value.
کلیدواژه modeling ,furnace ,gasification ,producer gas
آدرس NFC Institute of Engineering and Technology, Pakistan, University of Engineering and Technology, Taxila, Pakistan, University of the Punjab, Centre for Coal Technology, Pakistan, University of the Punjab, Institute of Chemical Engineering, Pakistan, NFC Institute of Engineering and Technology, Pakistan, NFC Institute of Engineering and Technology, Pakistan
 
     
   
Authors
  
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved