|
|
امکان سنجی تصفیه لجنهای تولیدی در تصفیهخانه فاضلاب شهری با کاربرد روش ازنزنی
|
|
|
|
|
نویسنده
|
انصاری محسن ,فرزادکیا مهدی
|
منبع
|
سلامت و محيط زيست - 1400 - دوره : 14 - شماره : 2 - صفحه:351 -362
|
چکیده
|
زمینه و هدف: تصفیه و تثبیت لجن فاضلاب همواره هزینهها و متعاقب آن انرژی بسیار زیادی را به تصفیهخانههای فاضلاب تحمیل میکند. جهت دستیابی به تصفیه و تثبیت هرچه بیشتر لجن، شکستن اجزای پیچیده به اجزای سادهتر بهعنوان یک مرحله حیاتی در نظر گرفته میشود. لذا، مطالعه حاضر با هدف امکان سنجی تصفیه لجن تولیدی در تصفیهخانه فاضلاب شهری با کاربرد روش ازنزنی انجام شد. روش بررسی: در این مطالعه لجن از خط برگشت لجن فعال از تصفیهخانه فاضلاب جنوب تهران برداشت شد. یک ژنراتور ازن با سرعت تخلیه l/min 3 و با غلظت ازن mg/l 3540 به راکتور واکنش تخلیه و سنجش غلظت ازن باقیمانده به روش یدومتری صورت گرفت. درنهایت، شاخصهای میزان جامدات معلق کل (tss) و فرار (vss)، اکسیژن موردنیاز شیمیایی محلول (scod)، کربن آلی کل (toc) و اکسیژن موردنیاز بیوشیمیایی محلول (sbod) در طول فرایندهای ازنزنی با استفاده از روش استاندارد متد مورد اندازهگیری قرار گرفتند. یافتهها: نتایج این تحقیق آشکار ساخت که در طول فرایند ازنزنی، میزان tss و vss لجن برگشتی فرایند لجن فعال به ترتیب از mg/l 4060 به mg/l 2100 و از mg/l 3300 به mg/l 1850 کاهش یافت. اما scod، toc و sbod در مدت زمان مشابه واکنش بهترتیب در حدود 18، 11/7 و 14 برابر سیر صعودی داشتند.نتیجهگیری: با توجه به نتایج بهدست آمده از این تحقیق میتوان نتیجه گرفت که سیستم ازنزنی میتواند به عنوان یک فرایند مناسب جهت تجزیه لجنهای تولیدی در تصفیهخانههای فاضلاب و افزایش قابلیت زیست تجزیه شوندگی این لجنها مورد پیشنهاد قرار گیرد.
|
کلیدواژه
|
ازنزنی، تصفیه لجن، تصفیه خانه فاضلاب
|
آدرس
|
دانشگاه علوم پزشکی ایران, مرکز تحقیقات تکنولوژی بهداشت محیط, ایران, دانشگاه علوم پزشکی ایران, دانشکده بهداشت، مرکز تحقیقات تکنولوژی بهداشت محیط, گروه مهندسی بهداشت محیط, ایران
|
پست الکترونیکی
|
farzadkia.m@iums.ac.ir
|
|
|
|
|
|
|
|
|
Feasibility of treating the produced sludge in municipal wastewater treatment plant using ozonation method
|
|
|
Authors
|
Ansari Mohsen ,Farzadkia Mahdi
|
Abstract
|
Background and Objective: Wastewater treatment and stabilization always imposes costs and consequently a lot of energy on wastewater treatment plants. To achieve the purification and stabilization of as much sludge as possible, breaking complex components into simpler components is considered a critical step. Therefore, this study aimed to evaluate the feasibility of treating the produced sludge in the municipal wastewater treatment plant using ozonation method.Materials and Methods: In this study, sludge was obtained from the return line of activated sludge from the wastewater treatment plant in the south of Tehran. An ozonation generator with a discharge rate of 3 L/min and an ozone concentration of 4035 mg/L was discharged to the reactor and the residual ozone concentration was measured by iodometric method. Finally, the total suspended solids and volatile, soluble chemical oxygen demand, total organic carbon, and biochemical oxygen demand during ozonation processes were measured using the Standard Method.Results: The results of this study showed that the amount of TSS and VSS in the activated return sludge decreased from 4060 to 2100 mg/L and from 3300 to 1850 mg/L during the ozonation process, respectively. However, SCOD, TOC, and SBOD had an upward trend of about 18, 11.7, and 14 times in the same reaction time, respectively.Conclusion: According to the results of this study, it can be concluded that the ozonation system can be proposed as a suitable process for the decomposition of sludge produced in wastewater treatment plants and increasing the biodegradability of these sludges.
|
Keywords
|
Ozonation ,Sludge treatment ,Municipal wastewater treatment plant
|
|
|
|
|
|
|
|
|
|
|