nonlinear dynamic analysis of cracked micro-beams below and at the onset of dynamic pull-in instability

In this paper, the effect of the crack on dynamic behavior of cracked microbeam in the presence of dc and ac loads are investigated. by applying the residual axial stress and fringing field stress, a nonlinear analytical model of cracked micro-beam is presented and crack is modeled by a massless rotational spring. the governing equation of the system is solved using galerkin procedure and shooting method. the equilibria curve and dynamic response of cracked cantilever and clamped-clamped micro-beam are extracted below and at the onset of the dynamic pull-in instability. the results show that the behavior of cracked micro-beam is different from ordinary cracked beam due to nonlinear effects. for a fixed relative crack location, increasing the crack depth causes increasing in the resonance amplitude and reduction in the resonance frequency below dynamic pull-in instability. also, in cracked cantilever micro-beams, by approaching the crack to fixed end, the resonance frequency reduces and the resonance amplitude increases. in cracked clampedclamped micro-beam, trend of variations of resonance frequency and resonance amplitude against the crack location is not regular. at the onset pull-in instability, the presence of the crack causes cyclic-fold bifurcation points to appear at the lower frequency. therefore, it causes early pull-in phenomenon or unwanted abrupt change at the micro-beam behavior. the achievement of this study is simulation of the response of the faulty low-voltage switch and mems resonators for different severity of crack at the onset of dynamic pull-in phenomenon.