>
Fa   |   Ar   |   En
   ارزیابی حذف آلاینده آنتی‌بیوتیک از محلول آبی با استفاده از هیدروژل‌های حاوی نانوذرات چارچوب فلزی-آلی  
   
نویسنده گلریزی آیدا ,احسانی عاطفه ,عرفان‌نیا حمید ,فتحی مرضیه ,اقدسی‌نیا حسن
منبع اولين كنگره بين المللي زيست محيطي شهر سبز، دانشگاه سبز - 1404 - دوره : 1 - اولين كنگره بین المللی زيست محيطی شهر سبز، دانشگاه سبز - کد همایش: 04251-94531 - صفحه:0 -0
چکیده    در این پژوهش هیدروژل کیتوسان حاوی نانوذرات چارچوب فلزی-آلی (mof) سنتز شد و کارایی آن برای حذف آنتی‌بیوتیک تتراسایکلین از آب ارزیابی شد. مشخصه‌یابی ftir و sem ادغام موفق چارچوب در ماتریس پلیمری و تشکیل شبکه متخلخل با پراکندگی یکنواخت ذرات را تایید کرد. سه عامل فرایندی بررسی شد: درصد وزنی mof در سه مقدار 10، 15 و 20 درصد وزنی، ph در بازه 4 تا 10 و مقدار جاذب در بازه 0.05 تا 0.25 گرم در 20 میلی‌لیتر بود. افزایش بارگذاری تا 20 درصد وزنی بازده حذف را به 90.99 درصد رساند. بیشینه کارایی در 8=ph ثبت شد و در شرایط بهینه، با 20 درصد وزنی و 0.01 گرم جاذب در 20 میلی‌لیتر، راندمان حذف به 95 درصد رسید. نتایج نشان می‌دهد هم‌افزایی سطح ویژه و جایگاه‌های فعال mof با زیست‌سازگاری و جداسازی آسان کیتوسان این کامپوزیت را گزینه‌ای مناسب برای تصفیه آب آلوده به تتراسایکلین معرفی می‌کند.
کلیدواژه پساب دارویی، هیدروژل کیتوسان، نانوذراتmof ، تتراسایکلین، جذب سطحی
آدرس , iran, , iran, , iran, , iran, , iran
پست الکترونیکی aghdasinia@tabrizu.ac.ir
 
   evaluation of antibiotic removal from aqueous solutions using hydrogels containing mof nanoparticles  
   
Authors
Abstract    in this study, a chitosan hydrogel containing metal–organic framework (mof) nanoparticles was synthesized and its efficiency for the removal of tetracycline from water was evaluated in batch mode. ftir and sem characterizations confirmed the successful incorporation of the framework into the polymer matrix and the formation of a porous network with uniformly dispersed particles. the effects of three process parameters were investigated: mof loading at 10, 15 and 20 wt%, ph in the range of 4–10, and adsorbent dose in the range of 0.05–0.25 g per 20 ml. increasing the mof loading to 20 wt% raised the removal efficiency to 90.99%. the maximum efficiency was obtained at ph 8, and under the optimum conditions, with 20 wt% mof and 0.10 g of adsorbent in 20 ml of solution, the removal efficiency reached 95%. these results show that the combination of the high specific surface area and active sites of the mof with the biocompatibility and easy separation of the chitosan hydrogel makes this composite a suitable option for the treatment of tetracycline-contaminated water.
Keywords pharmaceutical wastewater ,chitosan hydrogel ,mof nanoparticles ,tetracycline ,adsorption
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved