>
Fa   |   Ar   |   En
   تصفیه بیولوژیکی رنگ آبی راکتیو پساب کارخانه نساجی در راکتورهای ناپیوسته متوالی  
   
نویسنده رئیس فرشید بهناز
منبع چهارمين كنفرانس ملي شيمي كاربردي ايران - 1398 - دوره : 4 - چهارمین کنفرانس ملی شیمی کاربردی ایران - کد همایش: 98190-11302 - صفحه:0 -0
چکیده    آلاینده های رنگی صنعت نساجی منبع مهم آلودگی محیطی هستند. برآورد شده است که 1 تا 15 درصد رنگ در جریان فرایندهای رنگرزی و عملیات تکمیل از دست می رود و در پساب ها رها می شود. رهایی این پساب های رنگی مشکل عمده ای برای صنعت و هم چنین تهدیدی برای محیط زیست مطرح می کند. روش های فیزیکی و شیمیایی بسیاری برای حذف رنگ به کار برده شده اند اما این روش ها مقدار قابل توجهی لجن تولید می کنند یا ممکن است به علت مصرف بیش از حد مواد شیمیایی سبب آلودگی ثانوی شوند. در این تحقیق از لجن فعال برای حذف رنگ از پساب نساجی در راکتور ناپیوسته متوالی استفاده شده است. به طور کلی در فرآیند لجن فعال رنگ زدایی به وسیله جذب سطحی رنگ ها بر روی باکتری به وسیله اکسایش و متابولیسم هوازی انجام می شود. نتیجه رنگ زدایی به وسیله اسپکتروفتومتردوپرتوی تجزیه و تحلیل شد. تاثیر پارامترهای مختلف آزمایشگاهی از قبیل غلظت اولیه رنگ، زمان جذب بر رنگ زدایی رنگ ها توسط لجن فعال و ph بررسی و مشخص شد که از مدل های جذبی لانگمویر و فروندلیچ به خوبی تبعیت می کند. هم چنین مراحل جذب رنگ ها از سینتیک درجه دوم پیروی می کند. ضریب همبستگی بالا نشان می دهد که این روش بسیار مناسب بوده است.
کلیدواژه لجن فعال، راکتورناپیوسته متوالی، پساب نساجی، آبی راکتیو
آدرس , iran
 
   biosorption of reactive blue of industrial wastewater by sequencing batch reactor system  
   
Authors
Abstract    dye pollutants from textile industry are an important source of environmental contamination. it is estimated that 1-15% of the dye is lost during dyeing and finishing processes and is released in wastewaters. the released of these colored wastewaters poses a major problem for the industry as well as threat to the environmental. many physical and chemical methods including adsorption, coagulation, precipitation, filtration and oxidation have been used for the treatment to dye-contaminated effluents. these methods, however, many generate significant amount of sludge or may easily cause secondary pollution due to excessive chemical usage. in this study, the activated sludge was utilized to remove the color of a textile industry wastewater in a sequencing batch reactor system. in the activated sludge process decolorization is generally accomplished by adsorption of the dyes of bacteria rather oxidation though aerobic metab0lism. the effects of different operating parameters such as, ph (3,5,7,10), initial dyestuff concentration (40,50,60mgl^(-1)) and adsorption time on decolorization of dyes by activated sludge were investigated and indicated that equation models nicely comply to longmoir, frondlich adsorption and .also adsorption grades of these colors follow second-order model kinetics
Keywords activated sludge ,sequencing batch reactor ,textile wastewater ,reactive blue
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved