>
Fa   |   Ar   |   En
   حذف همزمانی رنگ های متیلن بلو و رودامین بی با استفاده از نانوکامپوزیت ag/cnt/g-c3n4 و اندازه گیری با روش اسپکتروفوتومتری مشتقی  
   
نویسنده عباسی اصل حمید ,قائدی مهراورنگ ,مرادی زهره ,سبزه میدانی محمد مهدی
منبع چهارمين كنفرانس ملي شيمي كاربردي ايران - 1398 - دوره : 4 - چهارمین کنفرانس ملی شیمی کاربردی ایران - کد همایش: 98190-11302 - صفحه:0 -0
چکیده    یکی از پرکاربرترین روش ها برای حذف آلاینده های رنگی از محلول های آبی، جذب سطحی می باشد. یکی از معایب جاذب ها، دشوار بودن بازیابی آن ها و استفاده مجدد از آن ها است. در این پژوهش حذف همزمان رنگ های متیلن بلو(mb) و رودامین بی (rhb) توسط نانوکامپوزیت ag/cnt/g-c3n4 مورد آزمایش قرار گرفته است. جهت مشخصه یابی نانوکامپوزیتag/cnt/g-c3n4 از میکروسکوپ الکترونی روبش (sem)، پراش اشعه ایکس (xrd) استفاده شده است. نتایج پراش اشعه ایکس حضور همزمان فازهای cnt، ag و g-c3n4 را در ساختار نشان می دهد. پس از تعیین پارامترهای تاثیرگذار، به کمک روش ccd آزمایش ها طراحی و به دلیل مناسب بوده مدل، بهینه سازی متغیر ها صورت گرفت. تحت شرایط بهینه، رنگ mb وrhb با غلظت 15 و 13 میلی گرم بر لیتر، در مدت زمان 8 دقیقه به ترتیب حدودًا 91 و 93 درصد حذف شدند. فرآیند جذب از سینتیک مرتبه دوم و ایزوترم جذب لانگمویر پیروی می کند. عملکرد بازیابی جاذب در حذف رنگ ها نشان داد که جاذب مورد نظر پایداری خوبی دارد.
کلیدواژه جاذب، طراحی آزمایش، بهینه سازی، بازیابی، g-c3n4
آدرس , iran, , iran, , iran, , iran
 
   removal of mb and rhb dyes using ag cnt gc3n4 nanocomposite and measuring by derivative spectrophotometric method  
   
Authors
Abstract    one of the most useful methods for removing color contaminants from aqueous solutions is adsorption. one of the disadvantages of absorbents is the difficulty of retrieving and reusing them. in this research, simultaneous removal of methylene blue (mb) and rhodamine bromide (rhb) was investigated with ag / cnt / g-c3n4 nanocomposites. this nanocomposites was characterized by xrd and fe-sem methods. x-ray diffraction results show the presence of cnt, ag and g-c3n4 phases in the composite. after determining the effective parameters using the ccd method, the experiments were designed and due to the suitability of the model optimization of the variables performed. under optimal conditions, mb and rhb at concentration of 15 and 13 mg / l, were eliminated 91 and 93% respectively in about 8 minutes, th adsorption process follows from the second-order kinetics and langmuir adsorption isotherm. the absorbent recovery function in removing dyes showed that the adsorbent has a good stability.
Keywords absorbent ,nanocomposite ,experimental design ,optimization ,recovery
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved