>
Fa   |   Ar   |   En
   بررسی عددی تاثیر پارامترهای هندسی و هیدرودینامیک امواج بر عملکرد سازه موج ‌شکن شناور پانتونی مستطیلی  
   
نویسنده اعظمی مهدی ,بختیاری مرتضی ,بهرامی حسین
منبع فناوري هاي پيشرفته در بهره وري آب - 1402 - دوره : 3 - شماره : 1 - صفحه:42 -60
چکیده    نظر به اینکه موجشکن‌ های پانتونی از جمله متداول‌ترین موجشکن‌های شناور بوده که نسبت به سایر انواع موجشکن‌های ثابت دارای مزایای فراوانی است؛ لذا در تحقیق حاضر به مطالعه عملکرد برخی از شکل های با مقطع مستطیلی این سازه تحت شرایط امواج دریای خزر پرداخته شده است. در این تحقیق از نرم‌افزار ansys aqwa استفاده شده است و تحلیل‌های انجام شده به صورت تحلیل هیدرواستاتیک و تحلیل تاریخچه زمانی با اعمال شرایط موج میانگین 20 ساله‌ی منطقه و تحلیل تاریخچه زمانی تحت شرایط امواج حدی منطقه انجام گرفته است. نتایج حاصل از تحقیق نشان می‌دهد در شرایط تحلیل هیدرواستاتیک بشترین میزان جابجایی را در حرکت heave و کمترین میزان جابجایی را در حرکت surge که بسیار ناچیز می‌باشد رخ داده است. جابجایی در حرکت heave تحت پریود موج 6ثانیه دارای بیشترین مقدار (61/1 متر) و در پریود 2ثانیه دارای کمترین مقدار می‌باشد همچنین در همین شرایط تحلیل میزان دوران حول محورهای z و y در برابر دوران حول محور x بسیار کمتر بوده و مقادیر بیشینه دوران حول محورهای y و z از مینیمم دوران حول محور x با مقدار 6.7e-05 (°/m) که در پریود 2ثانیه اتفاق می افتد، کمتر است.
کلیدواژه موج‌شکن شناور، پارامترهای هندسی، هیدرودینامیک امواج، نرم‌افزار انسیس، بالا و پایین رفتن شناور
آدرس دانشگاه علوم و فنون دریایی خرمشهر, ایران, دانشگاه علوم و فنون دریایی خرمشهر, دانشکده مهندسی دریا, گروه سازه‌های دریایی, ایران, دانشگاه علوم و فنون دریایی خرمشهر, دانشکده مهندسی دریا, گروه سازه‌های دریایی, ایران
پست الکترونیکی hossein_bahrami1979@yahoo.com
 
   numerical investigation of the effect of geometric and hydrodynamic parameters of waves on the performance of rectangular floating pontoon breakwater structure  
   
Authors azami mehdi ,bakhtiari morteza ,bahrami hossein
Abstract    considering that pontoon breakwaters are among the most common floating breakwaters, which have many advantages over other types of fixed breakwaters, therefore, in the present study, the performance of the rectangular section of this structure under the conditions of caspian sea waves has been studied. in this study, ansys aqwa software was used, and the analyzes were carried out in the form of hydrostatic analysis and time history analysis by applying the 20-year average wave conditions of the region and time history analysis under the conditions of regional limit waves. in order to validate and calibrate the model, mccartney’s 1985 laboratory data has been used. the results of the research show that in the conditions of hydrostatic analysis, the highest amount of displacement occurred in the heave movement and the lowest amount of displacement occurred in the surge movement, which is very insignificant. the displacement in heave movement under the wave period of 6 seconds has the highest value (1.6142 m) and the lowest value in the period of 2 seconds. also, in the same condition, the analysis of the amount of rotation around the z and y axes is very small compared to the rotation around the x axis. even the maximum values of the rotation around the y and z axes are less than the minimum rotation around the x axis with a value of 6.7504e-05 (°/m) which occurs in a period of 2 seconds.
Keywords floating breakwater ,geometric parameters ,wave hydrodynamic ,ansys aqwa ,heave
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved