>
Fa   |   Ar   |   En
   طراحی و ساخت استریپر اتمسفریک برای حذف آمونیاک از کندانس فرایندی واحد متانول پتروشیمی بوشهر؛ بخش اول: طراحی فرایندی  
   
نویسنده محمودی منش مرتضی ,دادالهی رضا ,باغیشنی حسین ,باقری حقیقی مهرشاد ,ندیمی حسین ,اردکانیان مهدی
منبع چهارمين كنفرانس بين المللي فناوري‌هاي جديد در صنايع نفت، گاز و پتروشيمي - 1401 - دوره : 4 - چهارمین کنفرانس بین المللی فناوری‌های جدید در صنایع نفت، گاز و پتروشیمی - کد همایش: 01220-35665 - صفحه:0 -0
چکیده    در واحد متانول پتروشیمی بوشهر، به دو دلیل نشتی مبدل گرم‌کننده آب تغذیه بویلر و همین‌طور افت کارایی برج اشباع کننده گاز خشک با بخار، حجم بالایی از کندانس‌های فرایندی مازاد تولید می‌شد که دارای محتوی آمونیاک حدود ppm 200 بود. به‌منظور حفظ محیط‌زیست و برای فراهم‌سازی امکان مصرف این کندانس در واحدهای دیگر و جلوگیری از ارسال آن به تصفیه‌خانه‌های منطقه که هزینه بر است، فرایند طراحی و ساخت یک استریپر اتمسفریک با توان فنی و کارگاهی داخلی پتروشیمی بوشهر برنامه ریزی گردید. طراحی فرایندی تجهیز با نرم افزار aspen plus و طراحی مکانیکال آن با نرم-افزار ansys انجام شد. استریپر اتمسفریک توانایی کاهش آمونیاک ton/hr 60 کندانس فرایندی تا ppm 2 را با مصرف ton/hr 6-8 بخار lps (barg 5.5) داراست. اجرای طرح مذکور علاوه بر جلوگیری از ارسال پساب آلوده به محیط‌زیست، به دلیل عدم نیاز به پیش‌تصفیه برای مصرف در واحدهای دیگر منجر به صرفه‌جویی 252 هزار دلار در ماه شده است.
کلیدواژه پساب فرایندی، آمونیاک، استریپر، aspen plus، طراحی و شبیه سازی، ansys
آدرس , iran, , iran, , iran, , iran, , iran, , iran
پست الکترونیکی m.ardakanian@bupc.ir
 
   design and manufacture of atmospheric stripper to remove ammonia from process condensate of bushehr petrochemical methanol plant; part 1: process design  
   
Authors
Abstract    in bushehr petrochemical company (methanol plant) a large volume of process condensate was produced, due to two reasons: boiler feed water pre-heater leakage and efficiency reduction of dry feed gas steam saturator, which was contained about 200 ppm of ammonia. in order to protect environment we need to provide consumption of the excess process condensate in other units, or prevent to send this to other waste water treatment plants in the region to save money. for this reason the design and manufacture of an atmospheric stripper was planned. the equipment process design & mechanical design was performed using the aspen plus & ansys softwares respectively. the designed atmospheric stripper is able to decrease the ammonia content of 60 ton/hr process condensate to 2 ppm consuming 6-8 ton/hr low pressure stripping steam (5.5 barg). this work has led to saving of 252000$ per month, because there is no need to treating wastewater. and also it prevents the discharge of waste water into the environment.
Keywords process wastewater ,ammonia ,stripper ,aspen plus ,design and simulation ,ansys
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved