>
Fa   |   Ar   |   En
   مطالعه خواص ساختاری، اپتیکی و ریختاری نانوساختار فریت قلع (snfe2o4) به روش همرسوبی کاربرد در الکترود باتری های لیتیومی  
   
نویسنده صداقتی جمال‌آباد قاسم ,باقری محققی محمدمهدی
منبع بيست و نهمين گردهمايي سالانه ملي فيزيك ماده چگال دانشگاه تحصيلات تكميلي علوم پايه زنجان - 1403 - دوره : 29 - بیست و نهمین گردهمایی سالانه ملی فیزیک ماده چگال دانشگاه تحصیلات تکمیلی علوم پایه زنجان - کد همایش: 03240-58066 - صفحه:0 -0
چکیده    در این تحقیق، نانو ذرات فریت قلع با ساختار اسپینل (snfe2o4) به روش همرسوبی سنتز شدند و خواص ساختاری ، اپتیکی و ریختاری نانو ذرات توسط دستگاه پراش پرتو x (xrd)، طیف سنجی uv-vis و میکروسکوپ الکترونی گسیل میدانی (fesem) مورد مطالعه قرار گرفت. طرح پراش پرتو x (xrd) نشان دهنده تشکیل فاز هیدروکسید اکسید آهن در دمای سنتز 80ᵒc و فاز فریت قلع در دمای بازپخت 300ᵒc می باشد. اندازه نانو بلورک ها برای نمونه های sfo1 در دمای سنتز 80ᵒc و sfo2 در دمای بازپخت 300ᵒc، به ترتیب 35.96 و40.88 نانومتر محاسبه شد. تصاویر fesem، شکل های مکعبی دانه ها را در نمونه sfo2تایید کرد که نشان دهنده تشکیل ساختار اسپینلی می باشد. همچنین نمودار جذب اپتیکی، افزایش جذب با افزایش دمای بازپخت را نشان داد که به همجوشی ذرات و افزایش حجم سلول واحد آنها نسبت داده می شود. محاسبه گاف نواری، نشان دهنده تشکیل ساختار نیمرسانایی فریت قلع با گاف 60/2 الکترون ولت می باشد.
کلیدواژه فریت قلع، اسپینل، هیدروکسید اکسید آهن
آدرس , iran, , iran
 
   study of structural, optical and morphological properties of nanostructure of tin ferrite (snfe2o4) by co-precipitation method for li-ion battery electrode  
   
Authors
Abstract    in this research, tin ferrite nanoparticles with spinel structure (snfe2o4) were synthesized by coprecipitation method and the structural, optical and morphological properties of the particles were studied by x-ray diffraction (xrd), uv-vis spectroscopy and field emission electron microscope (fesem). the xrd diagram shows the formation of the iron oxide hydroxide phase at the synthesis temperature of 80ᵒc and the tin ferrite phase at the annealing temperature of 300ᵒc. the crystallite size for sfo1 at t=80ᵒc and sfo2 at t= 300ᵒc samples was calculated to be 35.96 and 40.88 nm, respectively. fesem images confirmed the cubic shapes of grains in sfo2 sample, which indicates the formation of spinel structure. also, the absorption graph showed an increase in absorption with increasing annealing temperature, which is attributed to the fusion of particles and their volume increase. on the other hand, the bandgap calculation shows the formation of the semiconducting structure of tin ferrite.
Keywords tin ferrite ,spinel ,iron oxide hydroxide
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved