determination of impact hazard potential of rocks in the norilsk industrial region

The deeper the mineral deposits developments are, the worse the mining and geological conditions become. significant growth of stress level in the rock mass contributes to possible manifestation of rock pressure in dynamic form. the resulting task of assessment of rock impact hazard is closely related to the task of obtaining more accurate results of compression tests of samples in rigid or servohydraulic test presses using graphs of their full deformation. this approach requires special expensive equipment, considerable time resources, and sufficient core material. therefore, it is important to have an approach that allows to assess the propensity of rocks to brittle fracture with research methods simple enough not to result in the loss of quality and reliability of the obtained results. this paper presents the results of laboratory tests of rocks from the norilsk industrial region to determine their tensile and compressive strengths. test methods involved both domestic and foreign standards for determining the value of the brittleness coefficient. the impact hazard potential of rocks was determined using the kaiser criterion. it is found that the tested lithological types (rich sulfide ores, hornblende, disseminated ores, and gabbro-dolerite rocks), with the exception of anhydrite, have a low impact hazard potential.