determination of suitable distance between methane drainage stations in tabas mechanized coal mine (iran) based on theoretical calculations and field investigation

A large amount of gas is emitted during underground mining processes, so mining productivity decreases and safety risks increase. efficient methane drainage from the coal seam and surrounding rocks in underground mines not only improves safety but also leads to higher productivity. methane drainage must be performed when the ventilation air cannot dilute the methane emissions in the mine to a level below the allowed limits. the cross-measure borehole method is one of the methane drainage methods that involves drilling boreholes from the tailgate roadway to an un-stressed zone in the roof or floor stratum of a mined seam. this is the main method used in tabas coal mine n 1. one of the effective parameters in this method is the distance between methane drainage stations, which has a direct effect on the length of boreholes required for drainage. this study was based on the measurement of ventilation air methane by methane sensors and anemometers placed at the longwall panel as well as measuring the amount of methane drainage. moreover, in this study, the obtained and analyzed data were used to determine the suitable distance between methane drainage stations based on the cross-measure borehole method. in a field test, three borehole arrangements with different station distances in panel e4 of tabas coal mine n 1 were investigated. then, the amounts of gas drained from these arrangements were compared with each other. the highest methane drainage efficiency was achieved for distances in the range of 9-12 m between methane drainage stations.