Bond Strength of Resin Cements To Noble and Base Metal Alloys With Different Surface Treatments

Objectives: the bond strength of resin cements to metal alloys depends on the type of the metal, conditioning methods and the adhesive resins used. the purpose of this study was to evaluate the bond strength of resin cements to base and noble metal alloys after sand blasting or application of silano-pen.materials and method: cylinders of light cured z 250 composite were cemented to “degubond 4” (au pd) and “verabond” (ni cr) alloys by either relyx unicem or panavia f2, after sandblasting or treating the alloys with silano-pen. the shear bond strengths were evaluated. data were analyzed by three-way anova and t tests at a significance level of p<0.05.results: when the alloys were treated by silano-pen, relyx unicem showed a higher bond strength for degubond 4 (p=0.021) and verabond (p< 0.001). no significant difference was observed in the bond strength of panavia f2 to the al-loys after either of surface treatments, degubond 4 (p=0.291) and verabond (p=0.899).panavia f2 showed a higher bond strength to sandblasted verabond compared to relyx unicem (p=0.003). the bond strength of relyx unicem was significantly higher to silano-pen treated verabond (p=0.011). the bond strength of the ce-ments to sandblasted degubond 4 showed no significant difference (p=0.59). relyx unicem had a higher bond strength to silano-pen treated degubond 4 (p=0.035).conclusion: the bond strength of resin cements to verabond alloy was signifi-cantly higher than degubond 4. relyx unicem had a higher bond strength to si-lano-pen treated alloys. surface treatments of the alloys did not affect the bond strength of panavia f2.