Prediction of Gas Hydrate Forming Pressures by Using PR Equation of State and Different Mixing Rules

In this work, the ability of different mixing rules for the prediction of hydrate formation pressure are compared. for this purpose, by using van der waals–plauteeuw model for solid hydrate phase and pr equation of state for calculation of fugasity of components in gas and liquid phases, the pressure of hydrate formation in different mixtures has been calculated by four different mixing rules: van der waals, danesh, gnq and wong-sandler, then by comparison of the calculated results with experimental data, the accuracy of the mixing rules were determined. studied systems contain binary mixtures ch4, c2h6, c3h8, i-c4h10, co2, and h2s with water in hydrate forming conditions. the interaction parameters in each mixture have been optimized by using two phase equilibrium data w (vl ) and then the optimized parameters have been used for three phase equilibrium w (vl h ) calculations. comparison of the calculated pressure of hydrate forming with experimental pressure shows that for most mixtures in the studied temperature and pressure ranges, the gnq mixing rule with an average percent of error 6% has more accuracy than the three other mixing rules: van der waals, danesh and ws. according to the obtained results for methane equilibrium concentrations in liquid phase, it seems that danesh mixing rule is more efficient for the prediction the mole concentrations of components. since danesh rule considers the polarity of the water molecule, it has greater precision in predicting the equilibrium fractions.