>
Fa   |   Ar   |   En
   ارزیابی رفتار دمای متوسط و بالای قیر اصلاح شده توسط نانوکامپوزیت اتیلن وینیل استات - مونتموریلونیت  
   
نویسنده باباگلی رضوان
منبع جاده - 1401 - دوره : 20 - شماره : 113 - صفحه:277 -290
چکیده    روسازی های آسفالتی یکی از پرکاربردترین اجزای مورد استفاده برای روسازی بزرگراه هستند که در طول عمر خود دچار خرابی های مختلفی مانند شیار شدگی، خستگی و ترک های حرارتی می شوند. بنابراین، باید برای بهبود عملکرد قیر با افزودن اصلاح‌کننده‌هایی مانند پلیمرها و نانورس‌ها (nc1) استفاده شود. در میان مواد افزودنی پلیمری مختلف مورد استفاده برای بهبود عملکرد قیر، اتیلن وینیل استات (eva2) یکی از مفیدترین و موثرترین مواد برای روسازی است. در این مطالعه، رفتار رئولوژیکی قیر حاوی eva/nc و پلیمر eva مورد ارزیابی قرار گرفت. به منظور ارزیابی رفتار دمای متوسط ​​و بالای قیر، آزمون جاروب دامنه خطی (las3) و تست بازیابی خزش تنش چندگانه (mscr4) انجام شد. eva/nc  و eva تولید شدند و با قیر مخلوط شدند. نتایج آزمون پایداری ذخیره سازی نشان داد که قیر اصلاح شده با eva/nc نسبت به قیر اصلاح شده با eva پایدارتر است. نتایج آزمون mscr نشان داد که افزودن eva/nc و eva به قیر پایه منجر به افزایش درصد بازیابی کرنش و پارامتر (jnr) شد. به طوریکه افزودن 6% eva/nc سبب کاهش 71 درصدی در پارامتر jnr  می گردد. همچنین نتایج آزمون las نشان می دهد که افزودن eva/nc و eva به قیر پایه باعث افزایش عمر خستگی قیر می شود. بطوریکه افزایش 6% eva/nc و 6% eva سبب افزایش عمر خستگی به ترتیب برابر با 9 برابر و 2 برابر گردید.  با توجه به مناطق آب و هوایی ایران و قیرهای pg مورد نیاز، می توان نتیجه گرفت که قیر اصلاح شده با 4% eva/nc در تمامی مناطق آب و هوایی ایران و سپس قیر اصلاح شده 6% eva/nc قابل استفاده است.
کلیدواژه اتیلن وینیل استات (eva)، رئولوژی، جاروب دامنه خطی (las)، شیارشدگی، بازیابی خزش چند تنش (mscr)، خستگی
آدرس دانشگاه علم و فناوری مازندران, گروه مهندسی عمران, ایران
پست الکترونیکی rezvan_babagoli@yahoo.com
 
   evaluation of intermediate and high temperature behavior of binder modified by ethylene vinyl acetatemontmorillonite nanocomposite  
   
Authors babagoli rezvan
Abstract    asphalt pavements are one of the most widely constituents utilized to pave highway pavement which experience various failures during their lifetime, such as rutting, fatigue and thermal cracking. therefore it should be used to improve the bitumen performance by addition of modifiers such as polymers and nanoclays (nc). among the various additives used to improve the bitumen performance, ethylene vinyl acetate (eva) is one of the most useful and effective materials for paving. in this study, the rheological behavior of bitumen and fatigue behavior of mixture containing eva/nanoclay and eva latex were evaluated. in order to evaluate the intermediate and high temperature behavior of binder, the linear amplitude sweep (las) test and multiple stress creep recovery (mscr) test were implemented. eva/nc and eva latex were made and mixed with bitumen. results of storage stability test shown that eva/ncmodified bitumen is steadier than evalatexmodified bitumen. mscr test results indicated that addition of eva/nc and eva latex to original binder led to decrease and decrease the percent recovery and nonrecoverable compliance (jnr) values, respectively. also las test results show that addition of eva/nc and eva latex to original binder cause an enhance in fatigue behavior of binder. according to climatic regions in iran and required pg binders, it can be concluded that binder modified with 4% eva/nc can use in all climatic zones in iran followed by 6% eva/nc modified binder.
Keywords ethylene vinyl acetate (eva) ,rheology ,linear amplitude sweep (las) ,rutting ,multi stress creep recovery (mscr) ,fatigue
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved