|
|
بررسی آزمایشگاهی اثر شکل چاهک بر عملکرد سرریز فیوزگیت
|
|
|
|
|
نویسنده
|
خلیلی سمیه ,فضل اولی رامین ,عمادی علیرضا
|
منبع
|
آبياري و زهكشي ايران - 1402 - دوره : 17 - شماره : 5 - صفحه:1011 -1023
|
چکیده
|
در این تحقیق، به بررسی آزمایشگاهی اثر شکل چاهک (دماغهی مستطیلی، دماغه گرد و دماغه تیز) بر عملکرد هیدرولیکی سرریز فیوزگیت استاندارد مدل wlh (دریچه عریض با بار کم) و nlh (دریچه باریک با بار کم) پرداخته شد. سرریزهای مذکور به ترتیب با دو ارتفاع 16.7 و 25 سانتیمتر با پنج ارتفاع متفاوت چاهک ساخته شدند و بعد از قرار گرفتن در کانال، مورد آزمایش قرار گرفتند. آزمایشها در کانال آزمایشگاهی به طول 12 ، عرض 0.5 و ارتفاع 0.7 متر انجام شد. در مجموع تعداد 331 داده ثبت شد و با استفاده از آن، مقادیر ضریب دبی برای سرریز فیوزگیت محاسبه شد. با استفاده از 80% از دادهها روابط مناسب برای تخمین ضریب دبی ارائه شد و سپس این روابط با استفاده از 20% باقیماندهی دادهها و معیار ارزیابی rmse صحت سنجی شد. نتایج نشان داد که ارتفاع و شکل چاهک تاثیر قابل ملاحظهای بر ضریب دبی سرریز فیوزگیت ندارد ولی در ارتفاع چاهک یکسان، آب در برخورد با چاهک دماغه مستطیلی بیشتر بالا آمده و زودتر وارد چاهک میشود ولی در برخورد با چاهک دماغه تیز، شکافته شده و در امتداد پاییندست به طرفین هدایت شده و دیرتر وارد چاهک میشود. در نتیجه در یک ارتفاع ثابت چاهک، دبی واژگونی فیوزگیت با چاهک مستطیلی از بقیه کمتر است و چاهک دماغه گرد در مرتبه بعد قرار دارد.
|
کلیدواژه
|
شکل چاهک، صحتسنجی، ضریب دبی، فیوزگیت، مطالعه آزمایشگاهی
|
آدرس
|
دانشگاه علوم کشاورزی و منابع طبیعی ساری, دانشکده مهندسی زراعی, گروه مهندسی آب, ایران, دانشگاه علوم کشاورزی و منابع طبیعی ساری, دانشکده مهندسی زراعی, گروه مهندسی آب, ایران, دانشگاه علوم کشاورزی و منابع طبیعی ساری, دانشکده مهندسی زراعی, گروه مهندسی آب, ایران
|
پست الکترونیکی
|
emadia355@yahoo.com
|
|
|
|
|
|
|
|
|
investigation the effect of well shape on performance of fusegate weir.
|
|
|
Authors
|
khalili somaiyeh ,fazloula ramin ,emadi alireza
|
Abstract
|
in the current study, the effect of well shape (rectangular nose, round nose and sharp nose) on the hydraulic performance of standard fusegate model wlh (wide valve low head) and nlh (narrow low head) was investigated. these fusegates were made in 16.7 and 25 cm heights with five different heights of wells, respectively. experiments were carried out in a laboratory flume of 12 meters in length, 0.5 meters in width and 0.7 meters in height. in total 331 data were recorded and using it, the values of the flow coefficient for the fusegate were calculated. using 80% of the data, appropriate relationships were presented for estimating the discharge coefficient, and then these relationships were validated using the remaining 20% of the data and the rmse evaluation criterion. results showed that the height and shape of the well have no considerable effect on the discharge coefficient of the fusegate. at the same height of the well, the water rises more when it collides with the rectangular nose well and enters the well sooner, but when it collides with the sharp nose well, it splits and is directed to the sides along the downstream and enters the well later. thus, at a certain height of the well, the overturning discharge of the fusegate with the rectangular well is lower than the others, and the rounded nose well is in the next order.
|
Keywords
|
discharge coefficient ,experimental study ,fusegate ,validation ,well shape
|
|
|
|
|
|
|
|
|
|
|