>
Fa   |   Ar   |   En
   شبیه‌سازی عملکرد محفظه احتراق میکروتوربین با گاز سنتز: بررسی ترکیبات حاصل از زغال‌سنگ و زیست‌توده  
   
نویسنده سهرابی عارف ,میرساجدی مهدی
منبع سوخت و احتراق - 1404 - دوره : 18 - شماره : 1 - صفحه:29 -48
چکیده    در این پژوهش، عملکرد محفظه احتراق حلقوی یک میکروتوربین با استفاده از گاز سنتز حاصل از زغال‌سنگ و زیست‌توده شبیه‌سازی شد. هدف اصلی پژوهش بررسی عملکرد محفظه و تولید آلاینده‌ها در شرایط احتراقی پیش‌آمیخته است. شبیه‌سازی‌ها با استفاده از مدل احتراقی نیمه پیش‌آمیخته و مدل توربولانسی k-epsilon realizable انجام گرفت. مدل احتراقی نیمه پیش‌آمیخته، با ترکیب مزایای احتراق پیش‌آمیخته و غیرپیش‌آمیخته، امکان تحلیل دقیق فرآیند احتراق را فراهم کرده و قابلیت پیش‌بینی دقیق رفتارهای پیچیده جریان‌های مغشوش و واکنش‌های شیمیایی را ارائه داد. جریان سوخت و هوا به‌صورت پیش‌مخلوط در نظر گرفته شد که این رویکرد باعث بهبود یکنواختی دما و کمک به کاهش تولید آلاینده nox در استفاده از گاز سنتز شد. بررسی کسر جرمی oh نشان داد که گاز سنتز حاصل از زغال‌سنگ، به‌دلیل محتوای بالای هیدروژن و سرعت احتراق بیشتر، کوتاه‌ترین شعله را ایجاد می‌کند. میزان انتشار آلاینده‌های nox و co برای این سوخت به‌ترتیب برابر با ppm 23/3 و ppm  227/3 بود. از سوی دیگر، گاز سنتز حاصل از زیست‌توده، به‌دلیل وجود متان در ترکیب خود، میدان دمایی مشابه با احتراق متان خالص ایجاد کرد. با این حال، ترکیب بالای متان و مونوکسیدکربن باعث تولید میزان زیادی از آلاینده co به مقدار  ppm2914 شد. همچنین، این سوخت بیشترین میزان انتشار آلاینده nox را با مقدار ppm 29/9 نشان داد. بررسی‌ها نشان داد که استفاده از گاز سنتز حاصل از زغال سنگ در شرایط احتراقی پیش‌آمیخته آلاینده nox و نقاط داغ را کاهش می‌دهد.
کلیدواژه شبیه‌سازی عددی، محفظه احتراق حلقوی، میکروتوربین، گاز سنتز، آلاینده‌های nox
آدرس دانشگاه شهید بهشتی, ایران, دانشگاه شهید بهشتی, ایران
پست الکترونیکی m_mirsajedi@sbu.ac.ir
 
   simulation of microturbine combustion chamber performance with syngas: analysis of compositions derived from coal and biomass  
   
Authors sohrabi aref ,mirsajedi mehdi
Abstract    in this study, the performance of an annular combustion chamber of a microturbine was simulated using syngas derived from coal and biomass. the primary objective is to investigate the combustion chamber's performance and pollutant emissions under premixed combustion conditions. the simulations are conducted using a partially premixed combustion model and the k-epsilon realizable turbulence model. the partially premixed combustion model, by integrating the advantages of both premixed and non-premixed combustion, enabled an accurate analysis of the combustion process and provided precise predictions of complex turbulent flow behaviors and chemical reactions. the fuel and air were assumed to be premixed, which improved temperature uniformity and contributed to a reduction in nox emissions when using syngas. an analysis of the oh mass fraction revealed that coal-derived syngas, due to its high hydrogen content and faster combustion rate, produces the shortest flame. the nox and co emissions for this fuel were 3.23 ppm and 227.3 ppm, respectively. on the other hand, biomass-derived syngas generates a temperature field similar to that of pure methane combustion due to its methane content. however, the high concentrations of methane and carbon monoxide resulted in a significant co emission of 2914 ppm. this fuel also exhibited the highest nox emission, reaching 29.9 ppm. the findings indicate that utilizing coal-derived syngas in premixed combustion conditions reduces nox emissions and thermal hotspots. .
Keywords numerical simulation ,annular combustion chamber ,microturbine ,syngas ,nox emissions
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved