>
Fa   |   Ar   |   En
   تحلیل و بررسی تاثیر استفاده از سوخت دی متیل اتر بر عملکرد یک موتور احتراق داخلی اشتعال تراکمی  
   
نویسنده گنجی مهیاری محمد مهدی ,حمزه ای مهدی
منبع تبديل انرژي - 1399 - دوره : 7 - شماره : 2 - صفحه:29 -40
چکیده    در سال‌های اخیر تلاش‌های زیادی در جهت کاهش آلایندگی در موتورهای اشتعال تراکمی صورت گرفته است. دی متیل اتر به علت ویژگی‌های خاصی از قبیل عدد ستان بالا و آلایندگی ناچیز یکی از روش‌های رسیدن به این هدف می‌باشد. همچنین یکی از پارامترهایی که نقش مهمی در بهبود احتراق و عملکرد موتور دارد فشار پاشش سوخت است. در پژوهش حاضر یک مطالعه عددی به‌منظور بررسی مشخصه‌های عملکرد و آلایندگی موتور اشتعال تراکمی با استفاده از سوخت جایگزین دی متیل اتر، با تغییر فشار پاشش سوخت انجام‌شده است. در این تحقیق مشخصه‌های احتراقی موتور دیزلی چهار سیلندر تزریق مستقیم، با مشخصه‌های فیزیکی معین با نرم‌افزار ansys fluent شبیه‌سازی می‌شود. استفاده از سوخت دی متیل اتر با افزایش فشار پاشش سوخت تا 800 بار میزان افزایش مقدار بیشینه فشار و میزان کاهش مقدار بیشینه گرمای واکنش، دما، اکسید نیتروژن و دوده سوخت دی متیل اتر نسبت به سوخت دیزل در حدود 14 و 7.9، 11.7، 79 و 78.7 درصد است.
کلیدواژه دی متیل اتر، فشار پاشش سوخت، موتور اشتعال تراکمی، آلاینده، عملکرد موتور
آدرس دانشگاه آزاد اسلامی واحد اهواز, ایران, دانشگاه آزاد اسلامی واحد اهواز, دانشکده مهندسی مکانیک, ایران
 
   2. British Petroleum (BP), “BP energy outlook 2035”, 2014 (January)  
   
Authors
Abstract    In recent years, many efforts have been made to reduce pollution in compression ignition engines. Dimethyl ether is one of the methods to achieve this goal due to its special properties such as high Cetane number and low pollution. Also, one of the parameters that plays an important role in improving combustion and engine performance is fuel injection pressure. In the present study, a numerical study was performed to investigate the performance and pollution characteristics of a compression ignition engine using alternating fuel diesel fuel by changing the fuel injection pressure. In this study, the combustion characteristics of a fourcylinder direct injection diesel engine are simulated with specific physical characteristics with ANSYS Fluent software. Using Dimethyl ether fuel by increasing the fuel injection pressure up to 800 bar, increase in the maximum pressure and decrease in the maximum amount of reaction heat, temperature, nitrogen oxide and soot in Dimethyl ether fuel compared to diesel fuel is about 14 and 7.9, 11.7, 79 and 78.7 percent.
Keywords Key words: Dimethyl ether ,fuel injection pressure ,compression ignition engine ,pollution ,engine performance
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved