>
Fa   |   Ar   |   En
   تاثیر عملکرد حرارتی مصالح غالب مورد استفاده در نمای ساختمان بر شرایط آسایش حرارتی در معابر شهری اقلیم گرم وخشک  
   
نویسنده خداکرمی جمال ,نوری شهلا
منبع معماري و شهرسازي پايدار - 1399 - دوره : 8 - شماره : 2 - صفحه:201 -224
چکیده    هدف این تحقیق بررسی تغییرات سطح آسایش حرارتی در فضاهای باز شهری در اثر تغییر مصالح جداره های عمودی دره شهری است. شهر اصفهان به‌عنوان نمونه شرایط اقلیمی گرم، انتخاب شده است. در این تحقیق مصالح آجر، تراروتن، مرمر، سرامیک، آلومینیوم و گرانیت با ویژگی های حرارتی خاص خود به عنوان پوشش جداره‌های عمودی ساختمانهای دره شهری انتخاب و در نرم افزار انویمت شبیه سازی شده و داده های مربوط به دمای هوا، میانگین دمای تشعشعی، رطوبت نسبی و سرعت باد از نرم‌افزار خروجی گرفته و با استفاده از نرم‌افزار ریمن شاخص آسایش حرارتی pet محاسبه شده است. نتایج این پژوهش، نشان می‌دهد تغییر مصالح جداره عمودی از آجر به گرانیت در نسبت وجوه 0.5 و خیابان شرقی غربی سبب کاهش 1 تا 1.1درجه سانتی‌گراد دمای هوا، 14.1 تا 17.9 درجه سانتی‌گراد میانگین دمای تشعشعی و 8 تا 8.3 درجه سانتی گراد شاخص pet می‌شود. همین تغییر مصالح در نسبت وجوه 1 باعث کاهش 1.38 تا 1.49 درجه سانتی گراد دمای هوا، 16.45 تا 20.92 درجه سانتی گراد میانگین دمای تشعشعی و 9.23 تا 9.63 درجه سانتی گراد شاخص pet می‌شود. بعلاوه در نسبت وجوه 2 استفاده از گرانیت به‌جای آجر سبب کاهش 1.35 تا 1.36 درجه سانتی‌گراد در دمای هوا، 28.19 تا 30.15 درجه سانتی‌گراد میانگین دمای تشعشعی و 7.23 تا 9.23 درجه سانتی گراد شاخص pet می‌شود. این اختلاف‌ها در خیابان با جهت‌گیری شمالی جنوبی نیز وجود داشته و محاسبه‌شده‌اند.
کلیدواژه مصالح ساختمانی، جداره عمودی، عملکرد حرارتی، آسایش حرارتی، دره شهری
آدرس دانشگاه ایلام, گروه معماری, ایران, دانشگاه ایلام, گروه معماری, ایران
 
   The effect of thermal performance of dominant materials used in building facades on thermal comfort conditions in urban areas of hot and dry climate  
   
Authors Khodakarami Jamal ,Nouri Shahla
Abstract    This study investigates the effect of facades on the changes in thermal comfort level in open urban spaces. Isfahan city is selected as a case study for warm climate. Brick, travertine, marble, ceramic, aluminum and granite with their own thermal properties were selected as covering materials of the vertical walls of urban valley buildings and data on air temperature, mean radiation temperature, relative humidity and wind velocity were extracted from Envimet software. Using thermal comfort index of Riemann software, PET is calculated. The results of this study show that the change of the vertical walltogranite wall materials in the ratio of 0.5 and EastWest facets reduced the air temperature to 1 to 1.1 ° C, 14.1 to 17.9 ° C mean radiation temperature and 8 to 8.3 ° C, respectively. Can be. The same change in materials ratio of 1 reduced the air temperature from 1.38 to 1.49 ° C, 16.45 to 20.92 ° C and 9.23 to 9.63 ° C, respectively. In addition, the use of granite instead of bricks in the aspect ratio of 2 reduces the air temperature to 1.35 to 1.36 ° C, the mean radiation temperature from 28.19 to 30.15 ° C and the PET index from 7.23 to 9.23 ° C. These divergences have also been calculated in the street with a northsouth orientation. Finally, using regression method, it can be concluded that among the variables related to the material properties, the material release rate is the most effective material properties on PET index.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved