|
|
بررسی تاثیر تغییرات ارتفاع، پریود و نوع طیف امواج در طراحی جانمایی موجشکنهای بنادر (مطالعه موردی بندر بریزک)
|
|
|
|
|
نویسنده
|
حیدری ترکمانی حمید ,معینی محمد هادی
|
منبع
|
پژوهش هاي زيرساخت هاي عمراني - 1399 - دوره : 6 - شماره : 2 - صفحه:13 -23
|
چکیده
|
موجشکنها از جمله هزینهبرترین سازهها از میان زیرساختهای بندری بوده و بنابراین طراحی بهینه جانمایی آنها اهمیت بسیاری دارد. امروزه در اغلب فعالیتهای مهندسی، جهت بررسی و تحلیل میزان آرامش حوضچه بنادر و یا رسیدن به الگوی تفرق امواج در داخل حوضچه، از روش عددی (مدل بوسینسک در بسته نرمافزاری مایک21) استفاده میشود. هدف از این مطالعه، بررسی حساسیت ضرایب تفرق حاصل از مدل بوسینسیک نسبت به ارتفاع، پریود و نوع طیف موج ورودی است. بدین منظور، بندر بریزک جهت مطالعه موردی، انتخاب شده و در مدلهای عددی متعدد ارتفاع، پریود و نوع طیف موج ورودی در دامنه مشخص تغییر داده شده است. در هریک از مدلها ضرایب تفرق در محل مشخصی از داخل حوضچه استخراج شده و روند تغییرات آن بررسی گردیده است. براساس نتایج، افزایش پریود، موجب افزایش ضرایب تفرق گشته در حالیکه افزایش ارتفاع موج با ازای پریود ثابت، موجب کاهش ضرایب تفرق میشود.
|
کلیدواژه
|
موج شکن، آرامش حوضچه، مدل بوسینسک (mike21_bw)، ضریب تفرق، زیرساختهای ساحلی
|
آدرس
|
دانشگاه صنعتی سهند, دانشکده فنی مهندسی, ایران, مهندسین مشاور پویا طرح پارس, ایران
|
پست الکترونیکی
|
m.h.moini@ptpco.com
|
|
|
|
|
|
|
|
|
Investigation of the Effect of Wave Height, Period and Spectrum on the Layout of Breakwaters (Case Study: Brizak Port)
|
|
|
Authors
|
Heidary-Torkamani Hamid ,Moeini Mohammad Hadi
|
Abstract
|
Breakwaters are among the most expensive structures in port infrastructure and therefore the optimal design of their layout to form a port basin is very important. Nowadays, in most engineering activities, the BW (Boussinesq Wave) module of the Mike21 software package is used to study and analyze the tranquillity of the port basin or to achieve the wave diffraction pattern inside the port basin. This study aims to investigate the sensitivity of the diffraction coefficients obtained from the BW model to the height, period, and type of spectrum of the incident wave. For this purpose, Brizak port has been selected for the case study and in several numerical models, the height, period and type of input wave spectrum in a specified range have been changed. In each of the models, the diffraction coefficients in a specific location are extracted and the trend of its changes is investigated. According to the results, increasing the wave period increases the diffraction coefficients in the basin while increasing the wave height reduces the diffraction coefficient.
|
Keywords
|
|
|
|
|
|
|
|
|
|
|
|