|
|
بررسی مدل پیامد انتشار گاز متان در یکی از جایگاههای سوخت Cng شهر اهواز
|
|
|
|
|
نویسنده
|
شیرالی غلامعباس ,نعمت پور لیلا
|
منبع
|
بهداشت كار و ارتقاء سلامت - 1397 - دوره : 2 - شماره : 2 - صفحه:77 -88
|
|
|
چکیده
|
مقدمه: طی سال های اخیر اهمیت گاز طبیعی فشرده شده (cng) نسبت به بنزین و گازوئیل افزایش یافته است. استفاده از این گاز به عنوان سوخت پاک در کاهش آلاینده های هوا و محدودیت در تامین منابع نفتی موجب افزایش توسعه جایگاه های عرضه آن در کشور شده است. لذا هدف از انجام این مطالعه بررسی مدل انتشار گاز متان در جایگاه هایcng برای تهیه نقشه حفاظتی در اطراف آن ها می باشد. روش بررسی: پژوهش حاضر یک مطالعه موردی است. در این مطالعه، به مدلسازی پیامدهای آتش و انفجار در یکی از جایگاه های سوخت cng اهواز با استفاده از نرم افزار aloha انجام شده است. در این مدلسازی سناریوهای مختلف از جمله ایجاد شکافی با قطر 0.01 ، 0.02 و 0.03 متر بر روی مخازن تحت فشار متان مورد بررسی قرار گرفت.یافته ها: بر اساس نتایج این مطالعه، در مقایسه ای که بین سناریوهای متفاوت انجام شد، مشاهده گردید که با افزایش قطر شکاف، محدوده تشعشع حرارتی نیز در فواصل بیشتری پیشروی خواهد کرد به طوریکه این فاصله از شکافی به قطر 0.01 تا 0.03 میلی متر در kw/m2 10 به ترتیب از 10به 21 متری افزایش داشته است. همچنین در محدوده قابل اشتعال ابر بخار متان ، غلظت درppm 30000 که حدود 60 درصد حداقل غلظت قابل اشتعال (lel) می باشد که از فاصله 68.58 به 160 متر می رسد.نتیجه گیری: عواقب ناشی از موج انفجار تا 160 متر و تشعشع حرارتی تا 21 متری در جایگاه های سوخت cng خطرناک ترین عاملی است که کارکنان و مناطق مسکونی اطراف را تهدید می کند. در نتیجه با رعایت فاصله مجاز در ساخت و ساز و افزایش اقدامات ایمنی و پیشگیری از حوادث در اطراف جایگاه های سوخت رسانی می توان موجب کاهش تلفات و حوادث احتمالی شد.
|
کلیدواژه
|
جایگاه سوخت Cng، متان، مدلسازی پیامد، نرم افزار Aloha
|
آدرس
|
دانشگاه علوم پزشکی جندی شاپور اهواز, دانشکده بهداشت, گروه مهندسی بهداشت حرفه ای, ایران, دانشگاه علوم پزشکی جندی شاپور اهواز, دانشکده بهداشت, گروه مهندسی بهداشت حرفه ای, ایران
|
پست الکترونیکی
|
lnematpour94@gmail.com
|
|
|
|
|
|
|
|
|
Investigating Consequence Modeling of Methane Release at CNG Fuel Stations in Ahvaz City
|
|
|
Authors
|
SHIRALI Gholam Abbas ,NEMATPOUR Leila
|
Abstract
|
Introduction: In recent years, the importance of Compressed Natural Gas (CNG) has increased more than gasoline and petrol. Using this gas as a clean fuel to reduce air pollutants and restrictions on the supply of oil resources, has led to an increase in the expansion of its supply stations in the country. Therefore, this study aimed to investigate the methane release model at CNG fuel stations to provide the protection map around them.Method: The present study is a case study .In this study, modeling of fire and explosion consequences has been done by using ALOHA software at one of the CNG stations in Ahvaz. In this modeling, various scenarios were examined; including creating fractures on pressurized methane tanks with diameters 0.01, 0.20 and 0.03 meters.Results: The results of this study, by comparing different scenarios, showed that by increasing the diameter of the fracture, the range of thermal radiation would be enhanced at greater distances. The diameter of the fracture from 0.01 to 0.33 mm, in 10 kw / m2 has increased from 10 to 21 meters, respectively. Moreover, in flammable range of methane vapor, the concentration of 30,000 ppm is about 60% of the minimum explosive level (LEL), which ranges from 68.58 to 160 m.Conclusion: The consequences of the explosion wave up to 160 meters and thermal radiation up to 21 meters are the most dangerous factor at CNG fuel stations that threatens employees and surrounding residential areas. Therefore, by considering the permitted distance of the residential areas, increasing safety actions, and preventing accidents around the fuel stations, casualties and accidents can be reduced.
|
Keywords
|
ALOHA Software ,CNG Fueling Station ,Consequence Model ,Methane
|
|
|
|
|
|
|
|
|
|
|