>
Fa   |   Ar   |   En
   استفاده از ابعاد و شکل هندسی دانه های سنگ مخزن برای تصحیح مقادیر پتروفیزیکی با شبیه سازی فضای متخلخل بین دانه ای  
   
نویسنده رحیمی مجتبی ,قاسمی خسرو
منبع مهندسي منابع معدني - 1399 - دوره : 5 - شماره : 4 - صفحه:21 -35
چکیده    در سال‌های اخیر استفاده از تصاویر اسکن‌شده ریز‌پرتو ایکس در حد 100 نانومتر در زمینه‌های مختلف علمی، سبب به وجود آمدن روش‌های نوین برای انجام برخی محاسبات و اندازه‌گیری‌ها شده است. استفاده از این تصاویر توسط پژوهش‌گران برای به‌دست آوردن برخی از مقادیر مرتبط با سنگ مخزن مانند خواص پتروفیزیکی و نیز موارد مرتبط با سنگ و سیال مخزن به‌طور هم‌زمان مانند فرآیند ریزش و آشام در سنگ جایگاه ویژه‌ای پیدا کرده است. به‌این منظور، ابتدا با استفاده از تصاویر    ریز پرتو ایکس و با به‌کار بردن نرم‌افزارهای لازم، برخی مقادیر هندسی مربوط به دانه‌های سنگ دو نمونه مغزه محاسبه و نتایج به‌دست آمده با یکدیگر مقایسه می‌شوند. سپس با استفاده از همین تصاویر، اطلاعات لازم برای شبیه‌سازی فضای متخلخل بین دانه‌های سنگ به‌دست می‌آید. در ادامه، با استفاده از اطلاعات حاصل و نرم‌افزارهای دیگر، فضای متخلخل مرتبط با هر یک از این سنگ‌ها، شبیه‌سازی شده و با استفاده از آن‌ها، مقادیر تخلخل و تراوایی هر سنگ محاسبه می‌‌شود. در فرآیند شبیه‌سازی برای جلوگیری از پیچیده‌شدن محاسبات، از برخی فرضیاتی استفاده می‌‌شود که سبب انحراف مقادیر به‌دست آمده نسبت به مقادیر حقیقی (آزمایشگاهی) می‌‌شود.  به‌همین دلیل با استفاده از مقادیر هندسی به‌دست آمده در بخش اول، رابطه‌ای را به‌دست می‌آوریم که این مقادیر را از طریق شبیه‌سازی، تا حد امکان به مقادیر حقیقی نزدیک کند. در این پژوهش، براساس مراحل ذکر‌شده و بر مبنای کرویت، تحدب و نسبت تصویر حاصله از تصاویر دو بعدی، رابطه‌ای توسعه داده شد که خواص اندازه‌گیری شده از تصاویر را با خواص اندازه‌گیری شده آزمایشگاهی مغزه مرتبط می‌سازد.
کلیدواژه ریز پرتو ایکس، تخلخل، تراوایی، شبیه سازی، سنگ مخزن
آدرس دانشگاه آزاد اسلامی واحد خمینی شهر, گروه مهندسی نفت, ایران, دانشگاه آزاد اسلامی واحد خمینی شهر, گروه مهندسی نفت, ایران
 
   Use of Dimensions and Geometrical Shape of Reservoir Rock Grains for Correction of Petrophysical Values Through Simulation of Interparticle Pore Space  
   
Authors Rahimi M. ,Ghasemi Kh.
Abstract    In recent years, the use of micro XRay images with very high resolution (as low as 100 nm) in different scientific fields has led to the development of modern methods for performing various calculations and measurements. The use of these images has become quite popular among petroleum engineers. This is because the reservoir rockrelated properties like petrophysical properties and the properties that are simultaneously related to reservoir rock and fluid such as drainage and imbibition phenomena can be estimated using micro XRay images. To estimate these properties, some geometrical properties of grainsof two different cores are calculated and compared to each other through micro XRay images and somesoftware. Then, with the help of the micro XRay images, the necessary information for simulation of thepore network of the rock is gathered. Afterward, with the use of this information and some other software, the pore network of each of these rocks is simulated and consequently, the porosity and permeability of each of these rocks are estimated. In the simulation process, some assumptions are made to prevent the complexity of the calculations. These assumptions result in a deviation of the calculated values from real (laboratory) values. Therefore, using the calculated geometrical values obtained in the first step, a relationship is achieved by which the calculated values of the simulation are brought closer to those of the laboratory. In this research, based on the aforementioned steps and by using the sphericity, convexity, and aspect ratio of grains obtained from 2D images, a correlation is developed. Ultimately, the estimated rock properties procured by simulation are related to measured laboratory data through this correlation.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved