impacts of volume of carbon nanotubes on bending for carbon-‎kevlar hybrid fabrics

Carbon nanotubes indicate mechanical properties ideally examined for reinforced carbon/kevlar hybrid fabrics in the intact specimens by sem and edx observations an carbon nanotubes indicated mechanical properties that were examined for reinforced carbon/kevlar hybrid fabrics in the intact specimens by sem and edx observations and after attempting six successful ballistic impacts, at various targets’ angles: normal impact (0degree), 10degree, 20degree, 30degree, and 40degree) with the different volume of cnt% (0, 0.1, 0.3, 0.5, 0.7, 1, and 1.5) after attempting six successful ballistic impacts, at various targets’ angles: normal impact (0degree), 10degree, 20degree, 30degree, and 40degree) with the different volume of cnt% (0, 0.1, 0.3, 0.5, 0.7, 1, and 1.5). each sample was fabricated by the same curing unit and then evaluated by the three‐point bending universal testing machine model (instron3369). flexural stressstrain curves under 3points bending in cnt epoxy composite laminates calculated flexural modulus of elasticity and bending toughness at room temperature.