>
Fa   |   Ar   |   En
   مدل‌سازی انتشار گازهای آلاینده خروجی از دودکش نیروگاه حرارتی سهند با استفاده از نرم‌افزار screen view  
   
نویسنده ثقفی مهدی ,حسین پور فاطمه
منبع مهندسي بهداشت محيط - 1403 - دوره : 12 - شماره : 1 - صفحه:47 -62
چکیده    زمینه و هدف: هدف این پژوهش، مطالعه نحوه انتشار گازهای آلاینده‌ خروجی از دودکش نیروگاه حرارتی سهند و تعیین حداکثر غلظت این آلاینده‌ها در مناطق اطراف نیروگاه است.مواد و روش ها: جهت مدل‌سازی انتشار گازهای خروجی از دودکش نیروگاه از نرم‌افزار screen view استفاده شده است که می‌تواند با داده‌هایی نظیر نرخ جرمی انتشار آلاینده‌ها، دمای و سرعت گازهای خروجی، دمای محیط، ابعاد هندسی دودکش و ارتفاعات موجود در راستای انتشار، حداکثر غلظت آلاینده در میان تمام کلاس‌های پایداری هوا را در فواصل مشخص از دودکش نیروگاه محاسبه کند. در این پژوهش، غلظت آلاینده‌های دی‌اکسید نیتروژن، مونواکسید کربن و دی‌اکسید گوگرد در ٨ راستای شمال، شمال‌شرقی، شرق، جنوب‌شرقی، جنوب، جنوب‌غربی، غرب و شمال‌غربی دودکش نیروگاه محاسبه شده است.یافته ها: نتایج مدل‌سازی نشان می‌دهد که در فاصله ١٢١٨ متری از دودکش نیروگاه در معیار 1 ساعته، حداکثر غلظت دی‌اکسید گوگرد، دی‌اکسید نیتروژن و مونواکسید کربن، به ترتیب برابر با 915/٩، ٥٤/١٤ و ١/٣٠٥ میکروگرم بر مترمکعب است. همچنین، برای راستاهای دارای ارتفاعات مرتفع‌تر از دودکش نیروگاه در معیار 24 ساعته، حداکثر غلظت دی‌اکسید گوگرد، دی‌اکسید نیتروژن و مونواکسید کربن، به ترتیب برابر با ٦٨٠/٥، ٤٠/٢٢ و ٠/٩٧ میکروگرم بر مترمکعب است.نتیجه گیری: بررسی نتایج به دست آمده برای حداکثر غلظت آلاینده‌های منتشر شده از نیروگاه حرارتی سهند نشان می‌دهد که غلظت آلاینده‌های دی‌اکسید نیتروژن و دی‌اکسید گوگرد در برخی از مناطق مجاور نیروگاه، بالاتر از حدود مجاز استانداردهای مربوطه ایران و سازمان بهداشت جهانی بوده و سلامت ساکنین این مناطق در معرض خطر است.
کلیدواژه آلاینده‌های هوا، استانداردها، مدل‌سازی محاسباتی
آدرس دانشگاه بناب, دانشکده فنی و مهندسی, گروه مهندسی مکانیک, ایران, دانشگاه بناب, دانشکده فنی و مهندسی, گروه مهندسی مکانیک, ایران
 
   modeling dispersion of pollutant gases emitted from the chimney of sahand thermal power plant using screen view software  
   
Authors saghafi mahdi ,hosseinpour fatemeh
Abstract    background: this study aims to investigate the dispersion of pollutant gases emitted from the sahand thermal power plant’s chimney and determine the maximum concentration of these pollutants in the surrounding areas.methods: the emission of exhaust gases from the chimney was simulated using screen view software. this software calculates the maximum concentration of pollutants at specific distances from the chimney for all air stability classes, using input data such as the mass emission rate of pollutants, the temperature and velocity of the exhaust gases, the ambient temperature, the chimney’s dimensions, and the height in the direction of emission. this research calculated the concentrations of nitrogen dioxide, carbon monoxide, and sulfur dioxide in eight directions: north, northeast, east, southeast, south, southwest, west, and northwest of the power plant chimney.results: the modeling results indicate that at a distance of 1218 meters from the power plant chimney, the maximum 1-hour concentrations of sulfur dioxide, nitrogen dioxide, and carbon monoxide are 915.9, 54.14, and 1.305 micrograms per cubic meter, respectively. moreover, for areas with higher elevations relative to the chimney, the maximum 24-hour concentrations for sulfur dioxide, nitrogen dioxide, and carbon monoxide are 680.5, 40.22, and 0.97 micrograms per cubic meter, respectively.conclusion: the levels of nitrogen dioxide and sulfur dioxide in some areas near the power plant exceed the permissible limits set by the environmental standards of iran and the world health organization, posing a health risk to the residents of these areas.
Keywords air pollutants ,standards ,computational modeling
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved