|
|
مقایسه جاذب چارچوب آلی فلزی برپایه روی با جاذب پلیآنیلین/ xad-2 جهت نمونهبرداری و تجزیه هیدروکربنهای آروماتیک چندحلقهای با استفاده از روش نمونهبرداری تلهسوزنی در هوا
|
|
|
|
|
نویسنده
|
بهرامی عبدالرحمن ,سوری شیوا ,قلیچی زاوه زهرا ,قربانی شهنا فرشید
|
منبع
|
مهندسي بهداشت حرفه اي - 1403 - دوره : 11 - شماره : 2 - صفحه:133 -143
|
چکیده
|
سابقه و هدف: در این مطالعه دو نوع جاذب چارچوب آلی فلزی برپایه روی و جاذب پلی آنیلین/ xad-2، سنتز و بهلحاظ کارایی در نمونهبرداری از هیدروکربنهای آروماتیک چندحلقهای در هوا با روش تلهسوزنی بررسی و مقایسه شدند.مواد و روشها: نمونهبردارهای تلهسوزنی انباشته با جاذبها در شرایط یکسان جهت نمونهبرداری از هوای حاوی آنالیت انجام شدند و تاثیر پارامترهای دما، زمان واجذب، حجم گذر شکست و زمان ماندگاری آنالیت در بستر هر جاذب، تعیین و مقایسه گردید و پارامترهای عملکردی روش، مانند حدّ تشخیص (lod) و حدّ کمّیسازی (loq) جهت هر جاذب ارزیابی شدند.یافتهها: نتایج حاصل از بررسی عملکرد نمونهبردارهای تلهسوزنی پیشنهادی نشان داد که کمترین دما و زمان واجذب به ترتیب مربوط به تلهسوزنیهای حاوی جاذب xad-2/pani و جاذب چارچوب آلی فلزی برپایه روی است. مقایسه دو نوع تلهسوزنی ازنظرِ قابلیت نگهداری نمونه در محیطی با دمای ˚c 25 نشان داد که تلهسوزنی حاوی جاذب چارچوب آلی فلزی برپایه روی بهتر از تلهسوزنیهای حاوی جاذبهای xad-2/pani است.نتیجهگیری: براساس نتایج حاصل از بررسی عملکرد تلهسوزنیهای موردمطالعه در فاز آزمایشگاهی و نیز در عرصه، هر دو جاذب مورداستفاده بهدلیل ویژگیهای مطلوبی که دارند، قادر به بهبود عملکرد نمونهبردار تلهسوزنی برای نمونهبرداری ترکیبات آروماتیک چندحلقهای هستند و میتوانند حسّاسیت بالایی برای نمونهبرداری و آنالیز این ترکیبات ارائه دهند.
|
کلیدواژه
|
ابزار تلهسوزنی (ntd)، هیدروکربنهای آروماتیک چندحلقه ای (pahs)، سنتز جاذب، هوا
|
آدرس
|
دانشگاه علوم پزشکی همدان, مرکز تحقیقات بهداشت و ایمنی کار، دانشکده بهداشت، قطب بهداشت حرفهای کشور, ایران, دانشگاه علوم پزشکی همدان, مرکز تحقیقات بهداشت و ایمنی کار، دانشکده بهداشت، قطب بهداشت حرفهای کشور, ایران, دانشگاه علوم پزشکی همدان, مرکز تحقیقات بهداشت و ایمنی کار، دانشکده بهداشت، قطب بهداشت حرفهای کشور, ایران, دانشگاه علوم پزشکی همدان, مرکز تحقیقات بهداشت و ایمنی کار، دانشکده بهداشت، قطب بهداشت حرفهای کشور, ایران
|
پست الکترونیکی
|
fghorbani@umsha.ac.ir
|
|
|
|
|
|
|
|
|
comparison of zn3(btc)2 and xad-2/pani adsorbents for sampling and analysis of polycyclic aromatic hydrocarbons using needle trap sampling method in air
|
|
|
Authors
|
bahrami abdorahman ,sory shiva ,ghalichi zave zahra ,ghorbani shahna farshid
|
Abstract
|
background and objective: in the present study, two different and novel adsorbents were synthesized and investigated for their efficiency in needle trap sampling of pah compounds in the air.materials and methods: the needle trap samplers filled with each of the adsorbents were tested separately and under the same conditions to sample the air containing the analyte. the effect of parameters such as temperature and desorption time, volume of breakdown passage, and the retention time of analyte in the substrate of each adsorbent were determined, and the performance parameters of the method, such as limit of detection (lod) and limit of quantification (loq), were evaluated.results: the results of investigating the performance of the proposed needle trap samplers demonstrated that the lowest temperature and desorption time are related to the needle trap containing xad-2/pani. furthermore, the comparison of the three types of needle trap samplers in terms of the ability to store the sample in the environment with a temperature of 25°c illustrated that the needle trap containing zn-mof adsorbent is better than the needle trap containing xad-2/pani. conclusion: based on the results of investigating the performance of needle trap samplers studied in the laboratory phase and the field, both adsorbents used, due to their favorable characteristics, are able to improve the performance of the needle trap samplers for sampling polycyclic aromatic compounds and can achieve high sensitivity for sampling and analyzing these compounds.
|
Keywords
|
adsorbent synthesis ,air ,needle trap device (ntd) ,polycyclic aromatic hydrocarbons (pahs)
|
|
|
|
|
|
|
|
|
|
|