risk assessment of industrial hydrocarbon release and transport in the vadose zone as it travels to groundwater table: a case study

In this paper, a modeling tool for risk assessment analysis of the movement of hydrocarbon contaminants in the vadose zone and mass flux of contamination release into the groundwater table was developed. also, advectiondiffusionreaction equations in combination with a threephase equilibrium state between trapped air, soil humidity, and solid particles of unsaturated soil matrix were numerically solved to obtain a one dimensional concentration change in respect to depth of soil and total mass loading rate of hydrocarbons into the groundwater table. the developed model calibrations by means of sensitivity analysis and model validation via data from a site contaminated with btex were performed. subsequently, the introduced model was applied on the collected hydrocarbon concentration data from a contaminated region of a gas refinery plant in booshehr, iran. four different scenarios representing the role of different risk management policies and natural biodegradation effects were defined to predict the future contaminant profile as well as the risk of the mass flux of contaminant components seeping into the groundwater table. the comparison between different scenarios showed that biodegradation plays an important role in the contaminant attenuation rate; where in the scenarios including biodegradation, the contaminant flux into the ground water table lasted for 50 years with the maximum release rate of around 20 gr per year while in the scenarios without including biodegradation, 300 years of contaminant release into groundwater table with the maximum rate of 100 gr per year is obtained. risk assessment analysis strongly suggests a need for bioremediation enhancement in the contaminated zones to reduce the contaminant influx to groundwater.