>
Fa   |   Ar   |   En
   the comparison of the safety zone in the vicinity of marine clay treatment areas with and without surcharge and vacuum preloading  
   
نویسنده pardsouie mohammad mehdi ,mokhberi mehdi ,pardsouie mohammad hadi ,kariminejad mirmasoud
منبع international journal of coastal, offshore and environmental engineering - 2023 - دوره : 8 - شماره : 2 - صفحه:13 -20
چکیده    One of the important parameters that should be considered in designation of weak clay and peats treatment systems is the influence zone wherever there are infrastructures or sensitive buildings in the vicinity of the treatment area. since large vertical and horizontal displacements occur in these treatment systems, the soil around the project undergoes large strains that should be accounted for in project planning prior to finalization of the treatment system. the treatment systems for weak clays and peats are often a combination of prefabricated vertical drains plus vacuum and/or surcharge preloading. for investigation of the impact of preloading agents, and fem simulation of two case histories were performed. one the project incorporates the combination of surcharge and vacuum preloading while the other one consisted of only vacuum preloading without surcharge embankment. based on the verified models, different scenarios were introduced for comparison of impact of the vacuum and preloading agents on the magnitude of the influence zone. regarding the impact of surcharge embankment, it was shown that reducing the height of surcharge can drastically reduce the influence zone in both numerical simulations. the application of vacuum preloading as the only preloading agent has decreased the influence zone drastically and for urban areas or places that sensitive infrastructures exist might be an ideal option for similar cases. regarding the impact of magnitude of vacuum pressure on the influence zone it was shown that application of a stable high vacuum pressure can significantly reduce the diameter of the influence zone. for every project that includes the treatment of weak clay or peat stratums, based on the material and sensitivity of nearby structures and infrastructures, the maximum allowable strains should be determined prior to designation of the treatment system to avoid unpredicted damage by qualified consultants.
کلیدواژه vacuum preloading ,influence zone ,surcharge preloading ,pvd ,clay
آدرس islamic azad university, estahban branch, department of geotechnical engineering, iran, islamic azad university, estahban branch, department of geotechnical engineering, iran, islamic azad university, estahban branch, department of civil engineering, iran, islamic azad university, yasouj branch, department of civil engineering, iran
پست الکترونیکی mirmasoudkariminejad@gmail.com
 
     
   
Authors
  
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved