semi analytical transient dynamic analysis of composite adhesive single-lap joints

A novel semi analytical method is developed for transient analysis of single-lap adhesive joints with laminated composite adherends subjected to dynamical loads. the presented approach has the capability of choosing arbitrary loadings and boundary conditions. in this model, adherends are assumed to be orthotropic plates that pursuant to the classical lamination theory. stacking sequences can be either symmetric or asymmetric. the adhesive layer is homogenous and isotropic material and modelled as continuously distributed normal and shear springs. by applying constitutive, kinematics, and equations of motions, sets of governing differential equations for each inside and outside of overlap zones are acquired. by solving these equations, the time dependent shear and peel stresses in adhesive layer as well as deflections, stress resultants, and moment resultants in the adherends are computed. the developed results are successfully compared with the experimental research presented in available literates. it is observed that the time variations of adhesive peel and shear stress diagrams are asymmetric for the case of symmetric applied load with high variation rate. moreover, it is reported that although the magnitude of applied transverse shear force is reduced to 10% of applied axial force, however a significant increase of 40% in the maximum peel stress attained.