>
Fa   |   Ar   |   En
   طراحی، شبیه سازی و ساخت ساختار تغذیه بهینه برای آنتن های آرایه ای شکافدار خطی شعاعی توان بالا  
   
نویسنده محمدزاده فلاح ,حسنی علی ,خلج امیرحسینی محمد
منبع دريا فنون - 1401 - دوره : 9 - شماره : 4 - صفحه:19 -30
چکیده    آنتن آرایه‌ای شکافدار خطی شعاعی (rlsa) از نوع آنتن‌‌‌‌های آرایه‌‌‌‌ای صفحه‌‌‌‌ای با بازدهی بالا است که برای تولید پلاریزاسیون دایروی به کار می‌‌‌‌رود. ضریب بازتاب و پهنای باند آن تاثیر بسیار زیادی روی عملکرد آنتن دارد. دو عامل بسیار مهم در تعیین مقدار و پهنای باند ضریب بازتاب، مبدل کابل کواکسیال به موجبر شعاعی و خم الکتریکی 180 درجه است. در این مقاله ابتدا تحلیل ریاضی این دو بخش انجام شده است. پس از آن برای این دوبخش ساختاری بهینه طراحی و شبیه‌سازی شده است. ساختار پیشنهادی در طراحی یک آنتن آرایه‌ای شکافدار خطی شعاعی در فرکانس 10.2ghzمورد استفاده قرار گرفت. نتایج شبیه‌سازی نشان داد که کمینه‌ی ضریب بازتاب کمتر از db-30 و پهنای باند db-10 آن بیش از 1ghz است. در نهایت یک نمونه از آنتن شبیه‌سازی شده با استفاده از ساختار پیشنهادی ساخته شد. تحلیل توان آنتن نشان داد که حداقل توان قابل تحمل آنتن بیش از 120mw است و نتایج آزمون آنتن برای ضریب بازتاب نیز نتایج شبیه‌سازی را تایید کردند.
کلیدواژه مبدل کابل کواکسیال به موجبر‌ شعاعی، خم الکتریکی 180 درجه، آنتن آرایه‌ای شکافدار خطی شعاعی (rlsa)، امواج مایکروویو توان بالا (hpm)
آدرس دانشگاه جامع امام حسین (ع), ایران, دانشگاه جامع امام حسین (ع), ایران, دانشگاه علم و صنعت, ایران
پست الکترونیکی khalaja@iust.ac.ir
 
   design, simulation, and fabrication of optimal feeding structure for high power radial line slot array (rlsa) antennas  
   
Authors mohammadzadeh fallah ,hasani ali
Abstract    radial line slot array antenna (rlsa) is a high-efficiency plane array antenna used to generate circular polarization. its reflection coefficient and bandwidth have a great impact on antenna performance. two very important factors in determining the amount and bandwidth of the reflection coefficient are the converter of the coaxial cable to a radial waveguide and the180 degrees of electric bend. in this paper, first, a mathematical analysis of these two sections is performed. an optimal structure is then designed and simulated for these two sections. the proposed structure was used to design an radial line slot array antenna at 10.2 ghz frequency. the simulation results showed that the minimum reflection coefficient is -19.367 db and its bandwidth is more than 1 ghz . finally, a prototype of the simulated antenna was constructed using the proposed structure. antenna power analysis showed that the minimum tolerable power of the antenna is more than 120 mw and the antenna test results for the reflection coefficient also confirmed the simulation results.
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved