>
Fa   |   Ar   |   En
   بررسی اثر نسبت سبکدانه به سیمان بر روی ویژگیهای بتن متخلخل سبک حاوی لیکا  
   
نویسنده غلامین نوویرسر شهریار ,جمشیدی مرتضی ,مدندوست رحمت
منبع مهندسي سازه و ساخت - 1402 - دوره : 10 - شماره : 9 - صفحه:150 -173
چکیده    بتن متخلخل یک نوع خاص از بتن سبک با تخلخل بالاست که از آن می‌‌‌توان در روسازیهای‌ بتنی در مناطقی‌که به مقاومت فشاری بالا نیاز نیست‌، ‌استفاده کرد. روسازیهای بتنی متخلخل به علت تخلخل بالایشان، دارای ضریب هدایت حرارتی کمتری نسبت به‌ روسازیهای‌ بتنی‌نفوذ‌ ناپذیر می‌باشندکه منجر به مزیت محیط زیستی‌کاهش‌پدیده‌ جزیره گرمایی‌در‌مناطق‌شهری می‌شود.‌ در‌این -پژوهش ‌از لیکای ‌سازه‌ای ‌با‌ وزن‌حجمی m3‌‌‌kg/ 750‌ و نسبت آب به سیمان ثابت (3/0w / c =)، ‌برای ساخت بتن متخلخل سبک استفاده شد و ‌اثر ‌نسبتها‌ی مختلف سبکدانه به سیمان ( a/c ) شامل 3 ، 7/2 ، 4/2 ، 1/2 ، 8/1 ، 5/1 بر روی ویژگیهای فیزیکی ( چگالی خشک‌، تخلخل‌کل‌، نرخ نفوذ پذیری‌، ضریب هدایت‌ حرارتی )‌ و مکانیکی‌( مقاومت فشاری ) نمونه‌ها در سن‌28‌روز،‌‌‌‌ مورد بررسی قرارگرفت.‌ با افزایش نسبت a/c از 5/1 تا 3‌، حجم خمیر سیمان از 9/30 % به 4/15 % در نمونه‌ها کاهش یافت و مقادیر چگالی خشک در بازه 1/965 تا‌ kg /m3 6/1255 ( 1/23 % کاهش)‌،‌ تخلخل کل در بازه 3/22 % تا 1/39 % ( 9/16 % افزایش)‌، نرخ نفوذ پذیری در بازه 9/4 تا mm / s 2/14 ( 8/189 % افزایش )‌، ضریب هدایت حرارتی در بازه 34/0 تا (w / m.k) 53/0 ( 9/35 % کاهش ) و مقاومت فشاری در بازه 6/3 تا (mpa)2/12 ( 5/70 % کاهش ) ثبت شدند. نتایج این پژوهش بهبود ویژگیهای فیزیکی و افت ویژگیهای مکانیکی بتن متخلخل سبک حاوی لیکا را نشان دادند.
کلیدواژه بتن متخلخل سبک، هدایت حرارتی، لیکا، نسبت سبکدانه به سیمان، نرخ نفوذ پذیری
آدرس دانشگاه آزاد اسلامی واحد چالوس, گروه مهندسی عمران, ایران, دانشگاه آزاد اسلامی واحد چالوس, گروه مهندسی عمران, ایران, دانشگاه گیلان, گروه مهندسی عمران, ایران
پست الکترونیکی rmadandoust@yahoo.com
 
   investigation of effective parameters on compressive strength, specific electrical resistance and water absorption of lightweight pervious concrete  
   
Authors gholamin noveirsar shahriar ,jamshidi morteza ,madandoust rahmat
Abstract    pervious concrete is a special type of lightweight concrete with high porosity that can be used in concrete pavements in areas where high compressive strength is not required. due to their high porosity, pervious concrete pavements have a lower thermal conductivity coefficient than impermeable concrete pavements, which leads to the environmental advantage of reducing the heat island phenomenon in urban areas. in this study, structural leca with a volumetric weight of (750 kg/m3) and a fixed water-to-cement ratio (w/c = 0.3) was used to make lightweight pervious concrete, and the effect of different of lightweight aggregate to cement ratios (a /c) includes 1.5, 1.8, 2.1, 2.4, 2.7, 3 on physical properties (dry density, total porosity, infiltration rate, thermal conductivity coefficient) and mechanical (compressive strength ) of the samples at the age of 28 days were investigated. by increasing the a/c ratio from 1.5 to 3, the volume of cement paste decreased from 30.9% to 15.4% in the samples, and the dry density values ranged from 965.1 to 1255.6 kg/m3 (23.1% decrease), total porosity in the range from 22.3%. up to 39.1% (16.9% increase), infiltration rate in the range from 4.9 to 14.2 mm‌/‌s (189.8% increase), thermal conductivity coefficient in the range of 0.34 to 0.53 w‌/‌m.k (35.9% decrease) and compressive strength in the range of 3.6 to 12.2 (mpa) (70.5% decrease) were recorded. the results of this research showed the improvement of the physical properties and the decrease of the mechanical properties of lightweight pervious concrete containing leca.
Keywords lightweight pervious concrete ,specific electrical resistance ,compressive strength ,water absorption
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved