>
Fa   |   Ar   |   En
   ارزیابی عملی استفاده از بتن های سبک خودتراکم در احداث سازه های بتن آرمه  
   
نویسنده پوراحمدی صفت عربانی حامد ,صدر ممتازی علی ,میرگذار لنگرودی علیمحمد ,عمویی مرتضی ,کهنی خشکبیجاری رضا
منبع مهندسي سازه و ساخت - 1398 - دوره : 6 - شماره : شماره ویژه - صفحه:193 -204
چکیده    به عقیده بسیاری، بتن خود تراکم یا scc را می‌توان بتن آینده دانست. مهمترین قابلیت بتن خودتراکم، توانایی جریان یافتن تحت وزن خود، پرکردن فضای موردنیاز و یا قالب به طور کامل، و ایجاد یک مخلوط چگال و به مقدار کافی همگن در بین میلگردهای اعضای بتن‌آرمه، بدون نیاز به ویبره می‌باشد. اما روانی بیش از حد این بتن، فشار وارد بر قالب بندی را افزایش می‌دهد، به طوری‌که در لحظات اول بتن ریزی، فشار قابل توجهی بصورت هیدرواستاتیکی بر جدار قالب وارد می‌شود. لذا کاهش وزن بتن‌های خودتراکم میتواند یکی از روش‌های کاهش فشار وارد بر قالب بندی باشد. همچنین واضح است که کاهش چگالی بتن، اثر محسوسی بر کاهش وزن سازه داشته و به کاهش ابعاد اعضای سازه‌ای خواهد انجامید. اما از سوی دیگر همواره نگرانی‌هایی در خصوص جداشدگی سبک‌دانه‌ها در هنگام حمل و یا بتن‌ریزی وجود دارد. در این پژوهش، قابلیت حفظ همگن بودن مخلوط و مشخصات مکانیکی بتن سبک خودتراکم lwscc ساخته شده با سبک دانه‌های رایج در کشور شامل اسکوریا ، لیکا و پومیس در صورت استفاده کاربردی از آن در ستون‌های بتن‌آرمه، به کمک روش‌های نیمه‌مخرب و غیرمخرب بررسی می‌شود. برای رسیدن به این هدف، ستون‌های بتن‌مسلح ساخته شده با بتن سبک خودتراکم، به کمک آزمایش نیمه مخرب مغزه‌گیری به منظور تعیین مقاومت فشاری و نفوذناپذیری و آزمایش غیر مخرب التراسونیک در ارتفاع‌های مختلف ستون‌ها، مورد بررسی قرار گرفته‌اند. نتایج نشان داد که سبکدانه اسکوریا در مقایسه با سایر سبکدانه های مورد بررسی در این تحقیق، در مجموع عملکرد بهتری در بتن سبک خودتراکم داشته است.
کلیدواژه ستون بتن مسلح، بتن سبک خودتراکم، مقاومت فشاری، اولتراسونیک، مغزه‌گیری، نفوذ ناپذیری
آدرس دانشگاه آزاد اسلامی واحد فومن و شفت, گروه عمران, ایران, دانشگاه گیلان, گروه عمران, ایران, دانشگاه آزاد اسلامی واحد فومن و شفت, باشگاه پژوهشگران جوان و نخبگان, ایران, دانشگاه آزاد اسلامی واحد تهران جنوب, ایران, دانشگاه گیلان, ایران
 
   Practical Evaluation of Using Lightweight Self-Compacting Concrete in Reinforced Concrete Constructions  
   
Authors pourahmadi sefat arabani hamed ,Sademomtazi Ali ,mirgozar langaroudi miralimohammad ,amooei sarajari morteza ,kohani khoshkbijari reza
Abstract    Selfcompacting concrete or SCC can be considered as the concrete of the future. The most important feature of selfcompacting concrete is flowing under its own weight to fill the mould or framework completely, and also to create a dense and sufficiently homogeneous mix between the bars, without any need for vibration. But the excessive Liquidity of this concrete increases the hydrostatic pressure on the frameworks. So, decrease in the weight of selfcompacting concrete could be lead to reducing the pressure on frameworks. It is also clear that decreasing the density of concrete has a significant effect on the reduction of the structure’s weight and will lead to decrease in the size of structural elements. On the other hand, there are general concerns about the segregation of lightweight aggregates during transportation or placing. In this research, the ability of maintaining the homogeneity of the mixture and the mechanical properties of lightweight selfcompacting concrete (LWSCC) made with common lightweight aggregates in the country including Scoria, Leca and Pumice, has been investigated on concrete columns, using the Semidestructive and nondestructive methods. To do this, reinforced concrete columns made by selfcompacting concrete were investigated using a semidestructive core test to determine the compressive strength and impermeability. Nondestructive ultrasonic test at different heights of the columns was also conducted. The results showed that Scoria aggregate had generally better performance in selfcompacting concrete compared to other lightweight aggregates.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved