>
Fa   |   Ar   |   En
   مطالعه عددی عملکرد هم‌زمان سرریز و آبگیر سد و نیروگاه جریانی  
   
نویسنده اسمعیل پور ابراهیم ,سرکرده حامد ,جباری ابراهیم
منبع سد و نيروگاه برق آبي - 1400 - دوره : 8 - شماره : 30 - صفحه:33 -42
چکیده    در نیروگاه‌های جریانی به دلیل کوچکی مخزن با کوچک‌ترین سیلابی سرریز سد شروع به کار می‌کند. در پژوهش حاضر با تشکیل 16 گرداب در کلاس‌های مختلف به بررسی تاثیر عملکرد هم‌زمان سرریز و آبگیر نیروگاه در سد و نیروگاه مسجدسلیمان پرداخته‌شده است. روش vofو مدل les در شبیه‌سازی سطح آزاد و آشفتگی مورداستفاده قرار گرفت. با مقایسه هزینه محاسبات و مقدار خطا، اندازه شبکه 5 میلی‌متر برای مدل‌سازی به‌عنوان اندازه شبکه‌بندی مناسب تعیین شد. در گرداب‌های کلاس a زمانی که جریان سرریز در بیشترین حالت خود قرار دارد؛ در عدد فرود (fr) 3.7 و در عمق استغراق نسبی (s/d) 1.5،2.1 و 2.4 باعث کاهش 23%، 36% و 68% قدرت گرداب می‌شود. نتایج حاکی از آن است که جریان سرریز باافزایش s/d یا افزایش دبی سرریز تاثیر بیشتری بر قدرت گرداب دارد. جریان سرریز در گرداب‌های شکل‌گرفته کلاس a باعث حذف گرداب نمی‌شود، اما باعث تغییر کلاس گرداب به نوع b و c در بعضی از حالات می‌شود؛ اما در گرداب‌های تشکیل‌شده کلاس b و c با عملکرد هم‌زمان سرریز و آبگیر به‌طور کامل گرداب‌ها از بین می‌روند و چرخشی در سطح مخزن دیده نمی‌شود.
کلیدواژه گرداب، آبگیر، مدل‌سازی عددی، نیروگاه جریانی، جریان سرریز
آدرس دانشگاه علم و صنعت ایران, دانشکده مهندسی عمران, ایران, دانشگاه حکیم سبزواری, دانشکده فنی و مهندسی, گروه مهندسی عمران, ایران, دانشگاه علم و صنعت ایران, دانشکده مهندسی عمران, ایران
پست الکترونیکی jabbari@iust.ac.ir
 
   Numerical Study on Simultaneous Operation of Spillway and Power Intake  
   
Authors Esmaeilpoor Ebrahim ,Sarkardeh Hamed ,Jabbari Ebrahim
Abstract    Runofriver hydropower dams almost have a small reservoir and therefore, the spillway starts with the smallest flood in simultaneous with operation of power intakes. In the present study, by forming 16 vortex in different classes using Flow3D software, the effect of simultaneous operation of spillway and power intakes in Masjed Soleyman dam and power plant was investigated. VOF method and LES model were used for simulating free surface and turbulence, respectively. Regarding the cost of calculations and the amount of error, the network size of 5 mm was selected as the appropriate mesh size. In Class A vortices when the spillway flow is at its peak, the strength of formed vortices reduced about 23%, 36%, and 68% in different intake submerged depths. The results showed that by increasing the discharge of spillway, the formed vortices were weaker. Moreover, spillway flow in Class A formed vortices did not eliminate the vortex, But it caused to change the vortex class to B and C in some cases; However, in the formed vortex of Class B and C, with simultaneous operation of the spillway and power intakes, the vortex disappear completely and rotation was not observed on the surface of the reservoir.
Keywords Vortex ,intake ,numerical modeling ,power intake ,spillway
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved