|
|
sensitivity analysis on effective parameters on water alternative gas (wag) for enhanced oil recovery(eor)
|
|
|
|
|
نویسنده
|
mohsenatabar firozjaii ali ,moradi siyamak ,saghafi hamid reza
|
منبع
|
journal of gas technology - 2019 - دوره : 4 - شماره : 1 - صفحه:4 -15
|
چکیده
|
Enhanced oil recovery (eor) methods are employed for increasing oil recovery after natural production of the reservoir. each eor process has limitation for applying in reservoirs due to rock and fluid condition. in water alternating gas (wag) flooding, many parameters such as reservoir thickness, horizontal permeability, connate water saturation effect on oil recovery factor. in this study, main parameters that effect on wag oil recovery were discussed using fraction factorial design and simulation. the cmg-gem was used for simulation study. the minitab statistical experimental design software was used for stochastic analysis. the results show reservoir thickness, connate water saturation, and the interaction of two parameters reservoir dip angle and horizontal permeability had main effect on oil recovery factor. finally, a regression model based on the effective parameters was obtained. this regression model can be used to estimate the oil recovery during wag flooding. according to the results of this study, the performance of wag process in different candidate reservoirs can be predicted and one can rank the reservoirs to select the one with maximum recovery factor for further detailed reservoir and pilot studies.
|
کلیدواژه
|
eor ,water alternative gas ,wag ,cmg ,gem ,optimization
|
آدرس
|
petroleum university of technology(put), department of petroleum engineering, iran, petroleum university of technology(put), department of petroleum engineering, iran, national iranian oil company, ior/eor research institute, iran
|
پست الکترونیکی
|
h.saghafi@nioc.ir
|
|
|
|
|
|
|
|
|
تحلیل حساسیت برروی پارامترهای موثر بر تزریق متناوب آب و گاز به منظور ازدیاد برداشت
|
|
|
Authors
|
محسناتبار فیروزجائی علی ,مرادی سیامک
|
Abstract
|
روش های ازدیاد برداشت به منظور افزایش تولید پس از تولید طبیعی از مخزن به کار گرفته می شود. هریک از روش های ازدیاد برداشت با توجه به خصوصیات سنگ و سیال مخزن دارای محدودیت هایی هستند. در روش تزریق متناوب آب و گاز، پارامترهای مختلفی شامل ضخامت مخزن، تراوایی افقی، و اشباع اولیه آب بروی میزان ضریب بازیافت نفت تاثیر می گذارند. در این مطالعه، پارامترهای مهمی که برروی تزریق متناوب آب و گاز تاثیر دارند، مورد بحث قرار گرفته اند. نرم افزار شبیه سازی مخزن CMGGEM برای شبیه سازی و نرم افزار مینی تب برای طراحی و تحلیل آماری پارامتر ها مورد استفاده قرار گرفتند. نتایج نشان می دهد که ضخامت مخزن و اشباع اولیه آب تاثیر قابل ملاحظه ایی بر روی ریکاوری دارند به طوری که این مقادیر در کمترین حد باشد تاثیر مثبت است، و ریکاوری بیشترین مقدار را دارد. از طرفی دیگر، اثر برهمکنش دو پارامتری، شیب مخزن با تراوایی افقی تاثیر قابل ملاحظه ایی بر ضریب بازیافت دارند.
|
Keywords
|
|
|
|
|
|
|
|
|
|
|
|