>
Fa   |   Ar   |   En
   بررسی عوامل موثر برای بهبود عملکرد واحد تبدیل کاتالیستی  
   
نویسنده غفران مظفر احسان ,سردشتی بیرجندی محمدرضا ,شهرکی فرهاد
منبع فرآيند نو - 1397 - شماره : 64 - صفحه:5 -31
چکیده    در این مقاله با استفاده از نرم افزارaspen hysys واحد تولید گاز سنتز پتروشیمی شبیه‌سازی شده و تاثیر تغییر پارامترهایی همچون دما و فشار روی جریان خروجی از راکتور ثانویه در واحد مورد بررسی قرار گرفته است. علاوه بر این با توجه به قدیمی بودن واحد مورد مطالعه، افزودن یک راکتور تری‌ریفرمینگ برای افزایش راندمان تولید گاز سنتز پتروشیمی مورد بررسی قرار گرفت. دقت شبیه‌سازی در مقایسه با داده‌های طراحی بسیار مطلوب بوده و خطای متوسط کمتر از 5% را نشان می‌دهد. همچنین نتایج نشان می‌دهد با افزایش دما روی جریان خروجی از راکتور ثانویه، درصد تبدیل متان و نسبت هیدروژن به مونواکسید‌کربن افزایش می‌یابند. اما با افزایش فشار، درصد تبدیل متان و نسبت متان به هیدروژن نیز کاهش می‌یابد. همچنین با افزودن یک راکتور تری‌ریفرمینگ به واحد که در بازه دمایی 800 تا 850 درجه سانتی‌گراد کار کند، بهترین عملکرد را واحد از لحاظ تولید گاز سنتز خواهد داشت.
کلیدواژه شبیه سازی، ریفرمینگ بخار، بهبود عملکرد، راکتور تری‌ریفرمینگ
آدرس دانشگاه سیستان و بلوچستان, دانشکده مهندسی شهید نیکبخت, گروه مهندسی شیمی, ایران, دانشگاه سیستان و بلوچستان, دانشکده مهندسی شهید نیکبخت, گروه مهندسی شیمی, ایران, دانشگاه سیستان و بلوچستان, دانشکده مهندسی شهید نیکبخت, گروه مهندسی شیمی, ایران
پست الکترونیکی fshahraki@eng.usb.ac.ir
 
   investigating the effective factors to improve the performance of catalytic conversion unit  
   
Authors ghofran mozafar ehsan ,sardashti birjandi mohammad reza ,shahraki farhad
Abstract    in this paper, petrochemical synthesis gas production unit is simulated using aspen hysys software and the effect of changing parameters such as temperature and pressure on the output current of the secondary reactor in the unit is investigated. in addition, due to the age of the study unit, the addition of a trireforming reactor to increase the production efficiency of petrochemical synthesis gas has been investigated. the results also show that with increasing temperature on the output current of the secondary reactor, the percentage of methane conversion and the ratio of hydrogen to carbon monoxide increase. however, with increasing pressure, the conversion percentage of methane and the ratio of methane to hydrogen also decreases. in addition, by adding a trireforming reactor to the unit operating in the temperature range of 800 to 850 ° c, the unit will have the best performance in terms of synthesis gas production.
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved