>
Fa   |   Ar   |   En
   ساخت الکترودهای اصلاح‌شده صفحه چاپی حالت جامد و میله کربنی برای تعیین پتانسیومتری تالیم (iii)  
   
نویسنده درودی ابوالفضل
منبع كارافن - 1401 - دوره : 19 - شماره : 3 - صفحه:571 -585
چکیده    این مطالعه تحقیقاتی بر توسعه حسگر پتانسیومتری جدید برای تعیین یون‌های تالیم (iii) در محلول‌های آبی متمرکز است. الکترودهای انتخابی یونی مبتنی بر الکترود صفحه چاپی کربنی و الکترود میله کربنی می‌باشد و سطح الکترودها با پلیمر قالب یونی تالیم (iii) به‌عنوان یون‌دوست اصلاح شده است. الکترود انتخابی یونی با پراکندگی ذرات پلیمر قالب- تالیم (iii) در 2-نیتروفنیل اکتیل اتر به‌عنوان یک نرم‌کننده و سپس قرار دادن آنها در بافت پلیمری پلی وینیل کلراید تهیه می‌شود. الکترود انتخاب یونی تالیم ( (iiiپاسخ نرنست را برای یون تالیم (iii) در محدوده غلظت دینامیکی µm  20.5- 0.49 با شیب 19.6 میلی‌ولت نشان می‌دهد. از نکات قابل‌توجه، ضریب انتخاب‌پذیری الکترود تهیه‌شده می‌باشد. ضریب انتخاب‌پذیری این الکترود برای یون‌های دیگر از3-10×1.1 کمتر می‌باشد و این نشان‌دهنده گزینش‌پذیری الکترود به یون تالیم (iii) می‌باشد و یون‌های دیگر مزاحمت کمتری دارد. 
کلیدواژه تالیم، حسگر، پتانسیومتری، پلیمر قالب یونی، الکترود صفحه چاپی
آدرس دانشگاه فنی و حرفه‌ای, گروه شیمی, ایران
پست الکترونیکی abfmashhad@gmail.com
 
   construction of modified solid-state screen-printed and carbon rod electrodes for determination of thallium (iii) ions by potentiometric sensor  
   
Authors darroudi abolfazl
Abstract    this research study was focused on development of novel potentiometric sensor for the determination of thallium (iii) ions in water solutions. ion-selective electrodes based on screen-printed graphite electrode and carbon rod electrode described and modified solid-state screen-printed and carbon rod electrodes with thallium (iii)-imprinted polymer as ionopher. the ion-selective electrode was prepared by dispersing the thallium (iii)-imprinted polymer particles in 2-nitrophenyloctylether as a plasticizer and then embedding them in a polyvinylchloride polymeric matrix. the tl (iii)-ion selective electrode showed a nernstian response for thallium (iii) ions over the dynamic concentration range of 0.49 to 20.5 µm, with a slope of 19.6 mv per decade. one of the significant points was the selectivity coefficient of the prepared ion-selective electrode. the selectivity of this electrode for other ions was less than 1.1× 10-3 and this indicates the selectivity of the electrode to thallium (iii) ions and other ions was less disturbing.
Keywords thallium ,potentiometric ,sensor ,ion-imprinted polymer ,screen-printed electrode
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved