>
Fa   |   Ar   |   En
   تهیه و مشخصه‌یابی ریزکرات ژلاتین سدیم‌آلژینات جنیپین به روش تشکیل کمپلکس پلیالکترولیت  
   
نویسنده رستگار رامشه مجید ,بهنام قادر علی اصغر ,خانلرخانی علی
منبع مواد و فناوري هاي پيشرفته - 1399 - دوره : 9 - شماره : 3 - صفحه:63 -78
چکیده    بسپارهای تخریب پذیر زیستی با ماهیت غیرسمّی و زیست سازگار، در مهندسی بافت و رهایش دارو کاربرد دارند. مصرف ریزذرات بسپار طبیعی، به‌صورت مستقل یا در ترکیب با مواد دیگر، با کاربردهای گوناگون ازجمله زیست مواد تزریق پذیر، در حال گسترش است. در این پژوهش، برهم‌کنش بسپارهای زیستی ژلاتین و سدیم آلژینات در ساخت ریزکرات، مطالعه شد. برهم‌کنش این دو بسپار، متاثّر از ph، بار الکتریکی و غلظت آن‌ها است و واکنش الکترواستاتیک بین پروتئین های با بار مثبت و پلی ساکاریدهای آنیونی، منجر به تشکیل فازهای محلول و نامحلول می شود؛ بنابراین، تاثیر نسبت مخلوط کلوئیدی و ph، در هم انباشتی بررسی گردید. در ابتدا، وزن مولکولی ژلاتین با روش حلال زدایی، باریک شد و رنگ نگاری ژل تراوایی (gpc)، خروج ژلاتین با وزن مولکولی کم را تایید کرد. بررسی مایع شناور مخلوط های کلوئیدی با آزمون طیف سنجی مرئی فرابنفش (uvvis)، نشان داد که هم انباشتی بهینه، در نسبت ژلاتین به سدیم آلژینات برابر چهار و ph برابر 65/3 رخ داده است. طی این فرایند، ریزکرات در اندازه 10 تا 25 میکرومتر با سطوحی صاف تشکیل شد و با افزایش مقدار جنیپین، تمایل به هم نشینی ذرات مستقل ریزکرات بیشتر می شود. تغییر اندک ژلاتین در طیف دورنگ‌نمایی دورانی (cd)، برهم‌کنش با سدیم آلژینات را نشان می‌دهد و مشاهده گروه عاملی آمید در طیف سنجی فروسرخ تبدیل فوریه (ftir) نیز، آن را تایید می‌کند. نتایج دمانگاشت آزمون dsc، نشان‌دهنده افزایش دمای تخریب ریزکرات دارای مقادیر بیشتر جنیپین بوده است.
کلیدواژه ریزکرات، ژلاتین، سدیم‌آلژینات، جنیپین، پلی‌الکترولیت
آدرس پژوهشگاه مواد و انرژی, پژوهشکده فناوری نانو و مواد پیشرفته, ایران, پژوهشگاه مواد و انرژی, پژوهشکده فناوری نانو و مواد پیشرفته, ایران, پژوهشگاه مواد و انرژی, پژوهشکده فناوری نانو و مواد پیشرفته, ایران
 
   Preparation and Characterization of Microspheres Based on GelatinSodium AlginateGenipin by the Formation of Polyelectrolyte Complex  
   
Authors khanlarkhani Ali ,Behnamghader Aliasghar ,Rastegar Ramsheh Majid
Abstract    The Biodegradable polymers with nontoxic and biocompatible nature have applications in tissue engineering and drug delivery. The use of natural polymer microbeads independently or in combination with other materials is gaining ground in various applications including injectable biomaterials. In this research, the interaction of gelatin and sodium alginate biopolymers was investigated in the manufacture of microsphere. The interaction between these two polymers was influenced by their pH, charge, and concentration. The electrostatic reaction between positively charged proteins and anionic polysaccharides led to the formation of soluble and insoluble phases. Therefore, the effect of pH and colloidal ratio was examined on the Coacervation. First, gelatin molecular weight was narrowed by Desolvation method, and GPC confirmed the elimination of low molecular weight gelatin. The supernatants of colloidal mixtures were analyzed by UVVis test, and the results revealed that optimum coacervation occurred at a gelatin/sodium alginate ratio of four and a pH value of 3.65. During this process, microsphere formed with smooth surfaces in a size range of 1025 µm. An increase in the amount of genipin raised the aggregation tendency in independent microbeads. A slight change of gelatin in Circular Dichroism (CD) reflected the interaction with sodium alginate, which was confirmed by the amide functional group in the Fouriertransform infrared (FTIR) spectroscopy. Results of Thermogram of Differential Scanning Calorimetry (DSC) indicated an increase in the degradation temperature of microspheres containing higher amounts of genipin.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved