>
Fa   |   Ar   |   En
   ساخت پوشش نانوکامپوزیتی شفاف فوق آبدوست Pmma-Sio2  
   
نویسنده شاهرودی حمیده ,واعظی محمد رضا ,اسحاقی اکبر ,کاظم زاده اصغر
منبع مواد و فناوري هاي پيشرفته - 1399 - دوره : 9 - شماره : 2 - صفحه:1 -8
چکیده    در این پژوهش، فیلم نانوکامپوزیت فوق آبدوست شفاف pmma-sio2 به روش غوطه‌وری روی زیرلایه شیشه ای اعمال گردید. سپس نمونه‌ها در دماهای 100 و 500 درجه سلسیوس آنیل شدند. از میکروسکوپ الکترونی روبشی نشر میدانی (fe-sem)، طیف سنج پراش انرژی اشعه ایکس (eds)، میکروسکوپ نیروی اتمی (afm)، طیف سنج uv-vis و تحلیل‌گر زاویه تماس آب، به ترتیب برای بررسی مورفولوژی، درصد عناصر، زبری سطح، خواص نوری و آبدوستی نانوکامپوزیت استفاده شد. طیف عبور پوشش نشان داد که شفافیت زیرلایه‌ی شیشه با فیلم نانوکامپوزیت pmma-sio2 کاهش نیافت و بدون تغییر ماند. علاوه بر این، نتایج ترشوندگی برای نمونه های آنیل شده در دمای 500 درجه سلسیوس، کاهش زاویه تماس زیرلایه را از 34.1 درجه به حدود صفر درجه نشان داد.
کلیدواژه فوق آبدوست، پوشش، نانو کامپوزیت، سیلیکا
آدرس پژوهشگاه مواد و انرژی, پژوهشکده فناوری نانو و مواد پیشرفته, ایران, پژوهشگاه مواد و انرژی, پژوهشکده فناوری نانو و مواد پیشرفته, ایران, دانشگاه صنعتی مالک اشتر, دانشکده مهندسی مواد, ایران, پژوهشگاه مواد و انرژی, پژوهشکده نیمه‌هادی‌ها, ایران
 
   Fabrication of PMMASiO2 SuperHydrophilic Transparent Nanocomposite Coating  
   
Authors Eshaghi Akbar ,Kazemzadeh Asghar ,Shahroudi Hamideh ,Vaezi Mohammad Reza
Abstract    In this study, PMMASiO2 transparent superhydrophilic nanocomposite film was applied by immersion method on glass substrate. Then the samples were annealed at 100 and 500 °C. Field emission scanning electron microscope (FESEM), energy disspersive spectroscopy (EDS), atomic force microscope (AFM), UVVIS spectrometer, and water contact angle analyserwere used to studythe morphology, elements percentage, surface roughness, and optical and hydrophilic properties of nanocomposites. The coating transmission spectra showed that the transparency of the glass substrate did not decrease with PMMASiO2 nanocomposite film and remained unchanged. In addition, the wettability results for the annealed samples at 500 °C showed a decrease in the contact angle of the substrate from about 34.1° to about 0°.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved