>
Fa   |   Ar   |   En
   سنتز هیدروترمال نانو ذرات هماتیت آلاییده شده با Tiو Sn و لایه نشانی بر روی Fto  
   
نویسنده خاکپور زهرا ,پور فراهانی حجت اله ,مقصودی پور امیر ,عبادزاده تورج
منبع مواد و فناوري هاي پيشرفته - 1397 - دوره : 7 - شماره : 3 - صفحه:11 -18
چکیده    در این پژوهش نانو ذرات هماتیت آلاییده شده با تیتانیم و قلع به روش هیدروترمال با هدف افزایش سطح و بهبود خواص فوتو آندی هماتیت سنتز شد و بطور همزمان بر روی شیشه fto نشانده شد. در این روش برای رسیدن به لایه کامل هماتیت با چسبندگی مناسب بر روی شیشه fto واکنشگرها (محلول آمونیوم و کلرید آهن) بطور غیر مستقیم با یکدیگر در دمای  ̊c 120 و زمان 24 ساعت واکنش داده شدند. پوشش ها در دمای    ̊c 550  کلسینه شدند. آنالیز پراش پرتو ایکس xrd سنتز فاز هماتیت خالص را با ساختار بلورین رمبوهدرال  α-fe2o3 پس از عملیات حرارتی لایه نشانده شده در دمای 550 درجه سانتیگراد تایید کرد. بررسی کامل تر سنتز با کمک آنالیز ftir صورت گرفت و با استفاده از نتایج uv-vis انرژی پهنای باند نمونه ها با و بدون افزودنی محاسبه شد. به کمک تصاویر fesem نیز ریز ساختار و مورفولوژی پودرهای سنتز شده  بررسی و مقایسه گردید. نتایج نشان دادند که افزودن 1% وزنی تیتانیم به سنتز نانو ذرات کروی شکل یکنواخت و با کمترین انرژی پهنای باند ev 1/85 منجر می­شود.
کلیدواژه سنتز هیدروترمال، هماتیت دوپ شده با قلع و تیتانیم، فوتو آند
آدرس پژوهشگاه مواد و انرژی, پژوهشکده سرامیک, ایران, پژوهشگاه مواد و انرژی, پژوهشکده سرامیک, ایران, پژوهشگاه مواد و انرژی, پژوهشکده سرامیک, ایران, پژوهشگاه مواد و انرژی, پژوهشکده سرامیک, ایران
 
   Hydrothermal synthesis of hematite nanoparticles doped with (Ti and Sn) and deposition on FTO  
   
Authors Maghsoudipour Amir ,Pourfarahani Hojjat Allah ,Ebadzadeh Touraj ,Khakpour Zahra
Abstract    In this study, hematite nanoparticles and hematite nanoparticles doped with Ti, Sn doped have been synthesized and deposited on FTO glass for photo anode application. To make a thin layer of hematite by hydrothermal method, ammonia and ferric chloride solution react indirectly at 120 ̊C for 24 h for better adhesion of synthesized iron hydroxide on FTO glass. The   synthesized samples were calcined at 550o C. XRD analysis was confirmed that FeOOHcoated were subsequently converted to the rhombohedral structure of the aFe2O3.  A complete synthesis study was performed using FTIR analysis and using UVVis results, the bandgap energy of the samples was calculated with and without the additive. The finite structure and morphology of synthesized powders were also compared with FESEM images. The results showed that the addition of 1% wt of titanium caused the synthesis of uniform spherical nanoparticles leads to alow electrons bandgap energy of 1.85 eV.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved