|
|
|
|
Use of Response Surface Optimization Technique in Evaluating the Tool Wear in a Turning Machine Cutting Process
|
|
|
|
|
|
|
|
نویسنده
|
sada so
|
|
منبع
|
journal of applied sciences and environmental management - 2018 - دوره : 22 - شماره : 4 - صفحه:483 -487
|
|
چکیده
|
Response surface methodology (rsm) was used to evaluate the wear of a cutting tool during a turning machine cutting process. the data obtained reveals optimum values for this process as cutting speed= 1303rev/min, feed rate= 0.354 (mm/min), depth of cut= 0.458 (mm) at a minimized tool wear of 0.173. with the use of the response surface optimization process, the experiment was planned, carried out and analyzed. analysis of variance (anova) was used to check the significance of the model, as well as identify process parameters with the most significant effect on the tool wear.
|
|
کلیدواژه
|
Machining ,Tool Wear ,Optimization ,Response Surface Methodology
|
|
آدرس
|
delta state university, oleh campus, faculty of engineering, department of mechanical & production engineering, Nigeria
|
|
پست الکترونیکی
|
samorosada@gmail.com
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Authors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|